- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Concrex Fine Filler is an easy to use paste for repairing minor imperfections in floors before painting.
- Gives a painted floor a professional finish
- Fast drying permanent repairs
- Heavy duty epoxy resin repairs
- Rapid drying ready for painting
Includes 1 x resin, 1 x curing agent, gloves, spreader, 2 x spatulas.
For imperfections up to 5mm. For depths greater than this build up in layers or use Watco Concrex Carbon Fibre.
When you paint a concrete floor the paint highlights chips or scratches in the surface, especially if the paint is glossy. Imperfections will be highlighted which probably were not noticeable before and the finished result can be disappointing. Spending an hour just smearing Watco Concrex Fine Filler over these imperfections will leave a smooth surface ready for painting. When the floor is painted it will have a professional look about it.
Quick Links - Click To Jump To Section:
Features & Benefits
- Areas of use:
- Scratches
- Blemishes
- Bolt holes
- Concrete, sand & cement and metal
- Interior or exterior
- Gives a painted floor a professional finish
- Fast drying permanent repairs
- Easy to mix and apply
- Heavy duty epoxy resin repairs
- Rapid drying ready for painting
Surface Preparation
Surfaces should be clean, sound and free from dust, oil, grease or other contaminants. Some surface dampness can be tolerated, but surfaces should not be wet.
Mixing
Wear the gloves provided in the pack.
Using the spatulas provided, take equal sized portions of the resin (off white), and curing agent (black), and mix them together thoroughly on a suitable mixing board until they are a uniform grey colour.
The ideal mixing ratio is 1:1 by weight or volume – you should try to estimate equal quantities as closely as possible, but there is no need to weigh or measure them. Mix small, manageable amounts together at any one time, and no more than can be used in 15 - 20 minutes.
Application
Using the plastic scraper provided, immediately smear the mixed components over the repair and smooth off. This is made easier by wiping the plastic scraper with a cloth dampened with white spirit.
The repair can be over painted with any Watco products after only 1 - 2 hours.
Data sheet
- Manufacturer
- Watco
- For Use By
- Professional Use
- For Use By
- Industrial Use
- For Use By
- Consumer Use
- For Use On
- Concrete, sand & cement and metal
- Application Method
- Spreader, spatula, gloves - supplied
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1.5KG
- Maximum Applied Thickness
- Up to 5mm. For depths greater than this build up in layers or use Watco Concrex Carbon Fibre
- Dry to Recoat (at 20°C)
- 1 hour
- Fully Cured (at 20°C)
- 4 days
- Pot Life (at 20°C)
- 10 -15 minutes
- Coverage
- A 1.5kg pack makes approximately 1 litre of filler
- Recommended Thinner/Cleaner
- The plastic scraper provided for applying should be wiped clean with white spirit or a similar solvent before the Concrex Fine Filler cures.
- Shelf Life (from date of manufacture)
- 12 months in unopened containers
- Pot Life (at 10°C)
- 20 - 30 minutes
- Dry to Recoat (at 10°C)
- 2 hours
- Fully Cured (at 10°C)
- 7 days
- Colour(s)
- Grey
- Base Type
- Solvent Free
- Suitable For Use On
- Metal
- Suitable For Use On
- Concrete
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Cement
- Application Method
- Spatula
- Application Method
- Spreader
- Product Range
- Concrex
- Foot Traffic
- 6 hours @ 10°C
3 hours @ 20°C - Dry for Heavy Traffic
- 24 hours @ 10°C
16 hours (overnight) @ 20°C
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Concrex Fine Filler is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT