- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
An attractive and versatile safety finish, strong anti-slip strips for steps, ramps, floors, and heavy wear areas. Ideal for interior and exterior use on stairs, entrances, decking, and around machinery.
- Each pack contains resin, curing agent, an empty cartridge, nozzle, grit, and spreader
- Create any width or length of strip using the special tape (available separately from the kit in the drop-down menu)
- An alternative to anti-slip tape for a durable finish in heavy wear areas
- Attractive black finish
- Heavy duty and durable
- Carborundum grit give excellent slip resistance
- Tailor the design to your job
- Epoxy resins formula gives excellent adhesion to a variety of substrates including concrete, wood, tiles, marble, and other hard or painted surfaces
Note: While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered.
Watco Epoxy Grip Strip is a highly effective and extremely versatile anti-slip treatment.
Simply spread black epoxy resin paste between two lines of self adhesive Epoxy Grip Strip Tape and sprinkle grit onto the paste.
Remove the tape to leave a tough, black anti slip strip.
Watco suggest one or more 15mm wide strips, 50mm apart.
Strips of Epoxy Grip Strip can give a more attractive finish than a conventional coating. On outdoor steps it also allows rainwater to drain away more easily.
Pack contents:
- 1 x resin
- 1 x curing agent
- 1 x empty cartridge
- 1 x cartridge nozzle
- 1 x spreader
- 500g anti slip grit
- Available separately (select from the drop-down menu above): Epoxy Grip Strip Masking Tape (50m)
Quick Links - Click To Jump To Section:
Features & Benefits
- Areas of use include:
- Internal and external steps
- Ramps, entrance ways and decking etc
- Around machinery
- Smart, black epoxy resin strip with charcoal-grey gritted surface
- Epoxy resins formula gives excellent adhesion to a variety of substrates
- Create any width or length of strip using the special tape provided
- An alternative to anti-slip tape for a durable finish in heavy wear areas
- Epoxy resins formula gives excellent adhesion to a variety of substrates including concrete, wood, tiles, marble, and other hard or painted surfaces
Surface Preparation
Ensure surfaces are clean and dry. Do not apply to cold (less than 10°C) or damp substrates.
Mixing
Pour the curing agent into the tin of resin and mix thoroughly using a palette knife or similar.
Scrape down the sides and bottom of the tin during mixing to avoid unblended resin/curing agent creating soft spots.
Once mixed, pour into the cartridge supplied and close the open end with the plunger.
Place the cartridge into the skeleton gun and fit the nozzle once the end has been cut off.
Application
Please refer to the diagrams below. Do not mix the epoxy resin paste until you are ready to use it, since it must be applied immediately after mixing.
Data sheet
- Manufacturer
- Watco
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Wood
- For Use On
- Concrete
- For Use On
- Ceramic Tiles
- Application Method
- Medium pile roller
Cut in using a brush - Single, Two or Three Pack
- Three-Pack
- Pack Size
- 5m2
- Coverage
- One cartridge will provide a line approximately 10m long x 15mm wide when applied to a smooth substrate.
- Min. Application Temperature
- 10°C
- UN Number (Activator)
- UN2735
- UN Number (Base)
- UN3082
- Pot Life
- Approximately 20 minutes at 20°C.
Unused material can become hot if left in the cartridge. - Fully Cured
- Generally sufficiently hard to receive traffic after approximately 16 hours at 15°C - 20°C.
Curing time will be extended by lower temperatures. - Suitable For Use On
- Outdoor Steps
- Suitable For Use On
- Marble
- Suitable For Use On
- Exterior Steps
- Suitable For Use On
- Stairs
- Suitable For Use On
- External Steps
- Suitable For Use On
- Concrete Ramps
- Suitable For Use On
- Concrete Steps
- Suitable For Use On
- Steps
- Suitable For Use On
- Wood Floors
- Suitable For Use On
- Ramps
- Suitable For Use On
- Wood Steps
- Suitable For Use On
- Tiled Floors
- Suitable For Use On
- Machinery Areas
- Suitable For Use On
- Concrete
- Suitable For Use On
- Wood Decking
- Suitable For Use On
- Tiles
- Suitable For Use On
- Heavy Traffic Areas
- Suitable For Use On
- Wood
- Suitable For Use On
- Marble Floors
- Suitable For Use On
- Floors
- Suitable For Use On
- Entrances
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Interior Steps
- Suitable For Use On
- Previously Painted Surfaces
- Suitable For Use On
- Internal Steps
- Suitable For Use On
- Decking
- Finish
- Textured
- Application Method
- Hand
- Product Range
- Epoxy
- Categorised As
- Anti-Slip > Treads & Nosings
- Seasonal
- Cold Weather
- Product Type
- Stair Nosings
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Epoxy Grip Strip Anti-Slip For Steps is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT