- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Versatile and quick drying line marking paint based on chlorinated rubber resin which can be applied as low as 0°C.
- Showerproof in 1 hour.
- Accepts pedestrian traffic in only 4 hours at 10°C.
- For use on bare concrete, asphalt or painted floors.
- Also aged blacktop, thermoplastic coverings, and most types of painted lines and floor paints.
Important!
- For a more clearly visible marking, specify Roadmarker Reflective which has a surface coated with fine glass beads. Light reflects from the back of each bead to give a brighter appearance. The glass beads are extremely hardwearing and also give the surface greater slip resistance.
- Note: While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered.
Description
Quick Links - Click To Jump To Section:
Features & Benefits
- Areas of use:
- Private roads
- Car parks
- Industrial floors
- School playgrounds
- Ideal for heavily trafficked areas
- Quick drying – even at low temperatures
- Will tolerate a slightly damp substrate
- Apply with a roller or brush
- Suitable for external areas or well-ventilated internal spaces
Surface Preparation
Ensure surfaces are clean, dry and free from any loose material. Remove any contamination, including dirt, oil, laitance and light to medium grease with Watco Bio-D, or for thick deposits of grease use Watco Concroff.
Application
No need to stir. Apply by roller or brush. Make sure the lid is not left off the product for any length of time to prevent it drying out.
Roadmarker is solvent based and is therefore recommended for outside use. If using inside, ensure it is a well ventilated area, such as a loading bay, with doors opening directly to the outside.
Roadmarker Reflective – The lid of the tin of beads is perforated and sealed with a batch label (this can be seen clearly from the underside of the lid). Pierce the label to open a few of the holes and sprinkle beads evenly on to freshly applied Roadmarker. When dry, sweep away and dispose of the excess glass beads.
Limitations
Contains Xylene and is not recommended for use on newly applied Watco Flowtop or similar polymer reinforced screeds. If in doubt, apply to a small test area.
Test before using Watco Roadmarker on painted floors.
Do not apply too thickly to avoid waste, and to avoid a line that is too thick or uneven.
Do not apply in a high wind. Any glass beads that are not able to adhere to the Roadmarker will be quickly swept away, so ensure they settle down into the Roadmarker surface.
Only for use externally or in very well-ventilated internal areas.
Roadmarker Reflective – The Clear Anti Slip Glass Beads are a fine, light, powder. Do not breathe or ingest dust.
Product Details
9313-947109
Data sheet
- Manufacturer
- Watco
- For Use By
- Consumer Use
- For Use On
- Bare concrete, asphalt, painted floors, aged blacktop, thermoplastic coverings and most types of painted lines and floor paints.
- Application Method
- Brush, medium pile roller
- Single, Two or Three Pack
- Two-Pack
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Touch Dry (at 20°C)
- 90 minutes
- Coverage
- 5 litres will produce approximately 250-300 metres of 50mm wide line (12m² -15m² per pack). Application of the clear glass beads will generally increase line thickness by 250 to 400 microns.
- Recommended Thinner/Cleaner
- Use a thinner and cleaner based on a Xylene solvent such as Watco TH99 Cleaning Solvent
- Min. Application Temperature
- 0°C
- Shelf Life (from date of manufacture)
- 24 months in unopened container
- Touch Dry (at 10°C)
- 40 minutes
- Flashpoint
- Below 21°C
- Base Type
- Solvent-Based
- Suitable For Use On
- Tarmac
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Previously Painted Surfaces
- Suitable For Use On
- Asphalt Surfaces
- Suitable For Use On
- Thermoplastic
- Suitable For Use On
- Warehouse Floors
- Suitable For Use On
- Workshop Floor
- Suitable For Use On
- Concrete
- Suitable For Use On
- Floors
- Suitable For Use On
- Previously Painted Floors
- Application Method
- Brush
- Application Method
- Roller
- Product Usage Type
- Lines
- Colour Family
- Yellow
- Colour Family
- White
- Product Type
- Chlorinated Rubber
Questions
Question about the product
Nick Austin
on
2023-01-06 10:44:38
| Question:
How long does it last before having to re-line? |
Answer from Rawlins’ Technical Team:
This product is suitable for heavily trafficked areas, but the life span will depend on the exposure and level of traffic. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Roadmarker is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Watco Bio-D Floor Cleaner
A heavy-duty biodegradable cleaner for floor preparation, removes grease and oil from painted or bare concrete. Low odour formula Ideal for preparation to painting Removes oil and grease Can be diluted and used as a general floor cleaner on bare concrete Safe for use on most painted surfaces More Information Delivery Info
Price
£30.96
(incl. VAT)
In Stock and Available for Delivery
Watco Concroff Oil & Grease Remover
Lift grease and oil from bare concrete with this powerful, water-based degreaser. For preparation of heavily contaminated greasy floors prior to painting, inside or outside. Low odour formula Ideal for preparation to painting Removes oil and grease Can be diluted and used as a general floor cleaner on bare concrete Safe for use on most...
Price
£40.68
(incl. VAT)
In Stock and Available for Delivery