- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- High quality, highly wear resistant line marking system that can be applied as low as -10°C.
- This makes it the perfect line marker for unheated warehouses, walk in fridges, cold stores and loading bays.
- Particularly useful for exterior applications as it resists chalking, fading, weathering and UV discolouration.
- Ideal for interior and exterior use.
- Flexible and takes heavy wear and tear.
Note: While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered.
Description
Quick Links - Click To Jump To Section:
Features & Benefits
- Areas of use:
- Unheated warehouses
- Walk in fridges and cold stores
- Loading bays
- Concrete or sand and cement floors. Can be used on asphalt provided it is at least a month old and completely dry. It can also be used over most existing coatings, wood, metals and fibreglass although a sample area should be tested first
- Flexible
- UV resistant
- Can be applied between -10°C and +30°C
- Takes heavy wear and tear
- Excellent chemical resistance
- Ideal for interior and exterior use
Surface Preparation
All surfaces must be -10°C or above and free from ice or water.
Concrete to be treated must be at least four weeks old, completely dry and free of contaminants. Grease or oil should be removed with Watco Bio-D (or a similar emulsifying degreasant) and the area thoroughly washed off and allowed to dry. Very smooth concrete or concrete with surface laitance (a weak dusty layer) should be abraded or etched with Watco Etch & Clean to ensure adequate adhesion. The concrete should be thoroughly washed down and allowed to dry after treatment with Watco Etch & Clean.
Previously painted surfaces should be thoroughly abraded by sanding to improve adhesion and to remove any weak or loose material. A trial area is advisable to test compatibility with previous coatings.
Below 5°C it may be necessary to avoid processes which involve wetting the floor due to the difficulty in drying. A good sweep or mechanical brushing may be sufficient. Do not apply outside if rainfall is imminent.
Mixing
Mix between 10°C and 25°C. Remove the two inner tins from the tall outer tin. Stir each tin thoroughly and pour all of the contents into the outer tin (scrape around the inside of the tins to remove any residue). Mix the components together thoroughly using a spatula or a similar wide bladed tool (a piece of wooden batten is ideal). Continue mixing until an even colour and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin. Do not dilute. Pot life is 25-30 minutes at 15°C.
Application
Apply between -10°C and +30°C. The viscosity will be somewhat thicker at very low temperatures, reducing coverage a little.
Product Details
9318-947129
Data sheet
- Manufacturer
- Watco
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete or sand and cement floors. Can be used on asphalt provided it is at least a month old and completely dry. It can also be used over most existing coatings, wood, metals and fibreglass although a sample area should be tested first.
- Application Method
- Short pile roller, brush
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1L
- Coverage
- Each pack will cover approximately 75m of a 50mm wide line per 1 litre.
- Recommended Thinner/Cleaner
- Use Watco Cleaning Solvent TH99 to remove splashes or clean tools before the product cures.
- Min. Application Temperature
- (-10°C)
- Shelf Life (from date of manufacture)
- 12 months in unopened container
- Resistance to chemicals
- Cleaning Products
- Dry to Recoat
- -10°C: 30 hours
0°C: 16 hours
5°C: 10 - 12 hours
20°C: 4 - 5 hours - Colour(s)
- White, Yellow
- Suitable For Use On
- Concrete
- Suitable For Use On
- Wood
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Previously Painted Floors
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Fibreglass
- Suitable For Use On
- Sand and Cement
- Suitable For Use On
- Warehouse Floors
- Suitable For Use On
- Loading Bays
- Suitable For Use On
- Metal
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Product Usage Type
- Lines
- Product Range
- Toughline
- Dry for Light Traffic
- -10°C: 36 hours
0°C: 24 hours
5°C: 18 hours
20°C: 6 - 8 hours - Dry for Heavy Traffic
- -10°C: 48 hours
0°C: 36 hours
5°C: 24 hours
20°C: 12 hours - Colour Family
- Yellow
- Colour Family
- White
- Product Type
- Polyaspartic
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Toughline is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Watco Bio-D Floor Cleaner
A heavy-duty biodegradable cleaner for floor preparation, removes grease and oil from painted or bare concrete. Low odour formula Ideal for preparation to painting Removes oil and grease Can be diluted and used as a general floor cleaner on bare concrete Safe for use on most painted surfaces More Information Delivery Info
Price
£30.96
(incl. VAT)
In Stock and Available for Delivery
Watco Etch & Clean Concrete Surface Preparation
Dual action formula cleans and prepares bare concrete prior to painting. Use on old and new concrete, inside or outside Etches bare concrete to promote adhesion of paint finishes Removes dirt and light oil deposits Removes cement deposits from new concrete to ensure good paint adhesion Reduces alkalinity of new concrete – essential...
Price
£46.80
(incl. VAT)
In Stock and Available for Delivery