- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
407 Multi Surface Primer is a primer/sealer which offers excellent stain blocking and alkali resisting properties across substrates such as tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plastic.
- Single pack
- Internal or external use
- Gives excellent coverage to a multitude of stains
- Touch dry in just 30 mins @ 20 °C
- Matt finish
- Low odour
407 Multi Surface Primer is a primer/sealer which offers excellent stain blocking and alkali resisting properties across substrates such as tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plastic.
Suitable for interior or exterior use, 407 Multi Surface Primer is made with low odour solvents. It also gives excellent coverage to a multitude of stains, helping to prevent bleeding through the finishing coat.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Coverage
- Surface Preparation
- Application
- Cleaning
- Curing
- Storage & Shelf Life
- Health & Safety
Features & Benefits
- Excellent stain blocking
- Alkali resisting properties
- Single pack
- Internal or external use
- Touch dry in 30 minutes @ 20 °C
- Suitable for use on tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plastic
- Matt finish
- Low odour
Typical Properties
Technical Data | |
---|---|
407 Multi Surface Primer | |
Specific Gravity: | 1.10 @ 20 °C |
Volume Solids: | 36% |
Wet Film Thickness: | 100 microns |
Dry Film Thickness: | 35 - 40 microns |
Typical Viscosity: | 4.0 Poise C&P @ 25 °C |
Flash Point: | Above 32°C (closed cup) |
V.O.C. | 499g/litre |
Coverage
- Expected spreading rate of 10m²/litre at 50 microns dry film thickness
- The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application
Surface Preparation
- All surfaces should be clean, dry, sound and free from oil and dirt
- Wire brush or sand surface to remove any loose / flaking material and rust
Mixing:
- Mix well before use
Application
- As dictated by normal good painting practice
- In confined spaces, provide adequate ventilation during application and drying
Subsequent Coat:
- Any suitable topcoat
Cleaning
- LO White Spirit
Curing
Drying Times | |
---|---|
407 Multi Surface Primer | |
Touch Dry: | 30 Mins @ 20 °C |
Hard Dry: | 4 hours @ 20 °C |
Full Hardness: | 3-5 Days @ 20 °C |
Minimum Overcoating Time: | 4-6 hours |
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Storage & Shelf Life
- Store in closed original container at temperatures between 5°C and 25°C
- Keep away from heat, sparks and open flame
- Keep containers upright
- See section 7.2 of the Safety Data Sheet for further information
Health & Safety
- Please refer to Material Safety Data Sheet for information
- 407 Multi Surface Primer shall be applied strictly in accordance with the manufacturer’s instructions
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Manufacturer
- Rawlins Paints
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Tile, Wood, Metal, Plaster, Masonry Surfaces, Plastic
- Application Method
- Brush, Roller
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Dry to Recoat (at 20°C)
- 4-6 hours
- Fully Cured (at 20°C)
- 3-5 Days @ 20 °C
- Coverage
- 10m² per litre
- Solids by Volume
- 36%
- VOC
- 499g/litre
- Touch Dry
- 30 Mins
- Recommended Dry Film Thickness
- 35 - 40 microns
- Recommended Wet Film Thickness
- 100 microns
- UN Number
- UN1263
- Specific Gravity
- 1.10 @ 20 °C
- Viscosity
- 4.0 Poise C&P @ 25 °C
- Hard Dry
- 4 hours @ 20 °C
- Base Type
- Solvent-Based
- Suitable For Use On
- Masonry
- Suitable For Use On
- Timber
- Suitable For Use On
- Metal
- Suitable For Use On
- Plastic
- Suitable For Use On
- Tiles
- Suitable For Use On
- Plaster
- Suitable For Use On
- Previously Painted Surfaces
- Suitable For Use On
- Galvanising
- Application Method
- Brush
- Application Method
- Roller
- Product Usage Type
- Primer & Sealer
- Fastest Delivery
- Next Working Day
- Product Category
- Paints
- Colour Family
- White
Questions
Question about the product
Kate Finlayson on 2018-09-12 13:40:33 | Question:
Will multi surface primer cover a wooden summer house that has been treated with Danish oil |
Answer from Rawlins’ Technical Team:
Danish Oil is usually pure, without silicone, so assuming this is the case here we would recommend Coo-Var Penetrating Wood Primer which should be suitable for this job. | |
Denis Harrison on 2016-09-04 18:13:27 | Question:
Will this product adhere to gloss paint without sanding down? |
Answer from Rawlins’ Technical Team:
Yes, as long as the surface to be painted is clean and dry. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
407 Multi Surface Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT