- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A durable two-part grey floor paint for medium to heavy use, with anti-slip finish option. Applied over existing well bonded paint, or bare concrete where it will penetrate the surface making it easier to keep clean.
- Virtually odourless water-based formulation
- Good resistance to every day chemical spills
- Choice of anti-slip option below
Description
Quick Links - Click To Jump To Section:
Features & Benefits
- For concrete floors in warehouses, production areas, garages, showrooms, etc
- Takes forklift traffic
- Good resistance to every day chemical spills
- Virtually odourless water-based formulation
- Mid sheen finish
- Easy application and clean up
Preparation
- Clean and prepare bare concrete using Watco Basics Acid Etcher. This will remove light grease and oil deposits
- To remove heavier grease and oil use Watco Basics Floor Cleaner. This can also be used to remove grease from existing paint
- If over coating existing paint, please ensure it is well bonded. Remove any flaking or poorly bonded paint using a floor scraper for smaller areas or hire a grinder for larger areas. Smooth, glossy paint should be lightly abraded to provide a key
- Make sure the surface is clean and dust free before continuing
- New concrete should be at least 2 months old
- This paint is water-based, so it doesn’t matter if the floor remains slightly damp after cleaning
Repair
- Holes in excess of 5mm deep can be filled with Watco Basics Floor Repair Mortar, or providing the floor is level, Watco Pourable Repair Mortar
- For repairs which need to be ‘feather edged’ to nothing, or for repairs to damaged joint edges, please refer to Watco Concrex epoxy resin repair mortar. This should also be used if repairing broken kerb edges or step nosings
Painting
- Check the air temperature is around 15°C and the floor temperature at least 10°C
- Stir the contents of the resin and curing agent tins and then empty the content of the resin into the curing agent tin
- Mix the two components thoroughly using a wide bladed tool such as a piece of batten. A paint mixer in an electric drill is ideal
- If using the 5L anti slip version follow the above instructions, but empty the tin of aggregate into the larger, curing agent tin and mix this thoroughly. Then empty the contents into a mixing pail (a plastic bucket is ideal) and add the contents of the resin tin. Just use half the tin of aggregate if you are using the 2.5L size
- Mix thoroughly then tip the contents into a paint tray and apply using a medium pile roller. A brush can be used to cut in around edges
- Now it is mixed you have up to 2 hours to apply it before it become unusable
- Do not apply thickly
- The paint dries best in warm, well ventilated conditions. There is a small amount of water in the formulation used to link the epoxy resin and curing agent. When it has done so, the water must evaporate, which is why good ventilation and a reasonable temperature are important
Limitations
- Avoid applying in cold (below 15°C) conditions, instead see Watco Cold Set Coating
- Do not apply direct to dense, non-porous surfaces such as power floated concrete. This should first be coated with Watco Powerfloat Primer
- May cause rusting if applied to bare metal
- Unsuitable for outside application, (it will fade), instead use Watco Fastcoat
- Avoid using in confined spaces with little or no ventilation since it won’t dry. Choose Watco Epoxicote High Build for such areas
Product Details
9325-947191
Data sheet
- Manufacturer
- Watco
- For Use By
- Consumer Use
- For Use On
- Concrete Floors
- Application Method
- Medium pile roller, brush
- Sheen
- Mid Sheen
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 2.5L, 5L
- Touch Dry (at 20°C)
- 10 hours
- Dry to Recoat (at 20°C)
- 12 hours
- Coverage
- 5L covers approximately 30m2 with one coat depending on the texture and porosity of the floor. Two coats are recommended if using a roller. Coverage will be reduced if using a brush.
- Recommended Thinner/Cleaner
- Clean tools with water before the paint starts to dry.
- Min. Application Temperature
- Air temperature 15°c, floor temperature 10°c
- Shelf Life (from date of manufacture)
- 24 months in unopened containers.
- Resistance to chemicals
- Petrol
- Resistance to chemicals
- Oil
- Resistance to chemicals
- Cleaning Products
- Dry for Light Traffic (at 20°C)
- 16 - 24 hours
- Dry for Full Traffic (at 20°C)
- 2 - 3 days
- Colour(s)
- Standard Colours
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Bare Concrete Floors
- Suitable For Use On
- Wood
- Suitable For Use On
- Floors
- Suitable For Use On
- Wooden Floors
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Previously Painted Floors
- Suitable For Use On
- Garage Floors
- Suitable For Use On
- Warehouse Floors
- Suitable For Use On
- Production Areas
- Suitable For Use On
- Showroom Floors
- Suitable For Use On
- Warehouses
- Suitable For Use On
- Garages
- Suitable For Use On
- Forklift-Trafficked Floors
- Suitable For Use On
- Car Showrooms
- Suitable For Use On
- Showrooms
- Suitable For Use On
- Bare Concrete
- Finish
- Textured
- Application Method
- Brush
- Application Method
- Roller
- Components
- 2K
- Product Range
- Watco Basics
- Product Range
- Basics
- Full Chemical Resistance
- 7 days
- Colour Family
- Grey
- Anti-Slip Texture
- Fine Texture
- Product Type
- Epoxy
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Basics Epoxy Resin Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Watco Epoxicote High Build Concrete Floor Paint
An extra-thick epoxy resin floor coating for very heavy trafficked floor areas in warehouses, garages, production areas and showrooms, receptions, oil and chemical areas, with options for high-build, anti-slip, cold-cure, and rapid-drying from the drop-down menu below. Heavy duty protection for floors Thick, glossy, and strong Excellent...
Price
£238.44
(incl. VAT)
In Stock and Available for Delivery
Watco Concrex Coving Mortar
A heavy-duty epoxy resin mortar for a tough coved skirting often used in hygienic environments such as hospitals, food halls and bunds. Strong enough to feather-edge Virtually indestructible Impervious and non-dusting Permanent, easy clean feature Note: While great care is taken with the colour samples shown, no guarantee can be...
Price
£113.40
(incl. VAT)
In Stock and Available for Delivery
Watco Powerfloat Primer
An epoxy resin primer that allows smooth concrete to be painted without mechanical preparation. For priming power floated, very smooth or non-porous concrete floors which are prone to rejecting paint. Ready for overcoating in 12 hours Rapid version available, ready for overcoating in 4-6 hours Unique formula prevents paint peeling...
Price
£140.10
(incl. VAT)
In Stock and Available for Delivery
Watco Cold Set Coating
A polyaspartic coating for use at low temperatures - ideal for cold areas such as walk-in fridges, cold stores and loading bays. Highly wear resistant, easily copes with forklift trucks. Allows essential maintenance during the winter Ideal for use in chiller rooms Superior abrasion, scratch, and UV resistance Latest 2-part polyaspartic...
Price
£182.04
(incl. VAT)
In Stock and Available for Delivery
Watco Fastcoat
A new type of resin formulation significantly reducing time taken to paint a floor and put back into use. 5 colours available as well as an anti slip finish for a finely textured, easy clean surface. Revolutionary, high performance, two part, polyaspartic resin formulation Exceptionally fast curing - apply 2 coats in one day to reduce...
Price
£182.04
(incl. VAT)
In Stock and Available for Delivery
Watco Basics Pourable Repair Mortar
Watco Basics Pourable Repair Mortar is a quick and easy way to fill holes in concrete floors. This blended polymer and cement formulation is strong enough to resist heavy foot traffic, trolleys and trucks. Just take as much powder as you need out of the bucket, mix with water and pour – you don’t need a primer. Just mix with water and pour...
Price
£97.56
(incl. VAT)
In Stock and Available for Delivery
Watco Basics Floor Repair Mortar
Watco Basics Floor Repair Mortar can be used to fill holes in concrete inside and out. It is strong enough to resist heavy foot traffic, trolleys and trucks. Just take as much powder as you need out of the bucket, mix with water and trowel into place – you don’t need a primer. Easy mix polymer and cement formulation Heavy traffic after...
Price
£58.50
(incl. VAT)
In Stock and Available for Delivery
Watco Basics Acid Etcher
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
In stock