- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
314 Clear Floor Sealer is a clear floor coating for suitably prepared concrete, wood, metal and GRP to help with the prevention of dusting.
314 Clear Floor Sealer is ideal where a low cost sealer is required. Suitable for interior and exterior use.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Coverage
- Surface Preparation
- Application
- Cleaning
- Curing
- Storage & Shelf Life
- Health & Safety
Features & Benefits
- For suitably prepared concrete, wood, metal and GRP
- Semi-gloss finish
- Single pack
- Internal or external use
- Touch dry in 4 hours @ 20 °C
- Ideal where a low cost sealer is required
Typical Properties
Technical Data | |
---|---|
314 Clear Floor Sealer | |
Specific Gravity: | 1.11 @ 20 °C |
Volume Solids: | 59% |
Wet Film Thickness: | 100 microns |
Dry Film Thickness: | 50 - 60 microns |
Typical Viscosity: | 4.5 Poise @ 25 °C |
Flash Point: | Above 32°C (closed cup) |
V.O.C. | 337g/litre |
Coverage
- Expected spreading rate of 11-12m²/litre at 50 microns dry film thickness
- The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application
Surface Preparation
- All surfaces should be clean, dry, sound and free from contaminants
- Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint
- This can be done mechanically by abrading or blasting, or chemically using Acid Etch
- These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance
- New concrete must be allowed to cure thoroughly which can take up to 3 months
Mixing:
- Mix well before use
Priming:
- 10% thinned 314 Clear Floor Sealer
Application
- As dictated by normal good painting practice
- Do not apply if the temperature is likely to drop below 7 °C during application or during the drying process
- In confined spaces, provide adequate ventilation during application and drying
Subsequent Coat:
- 301 Industrial Floor Paint if required
Cleaning
- White Spirit
Curing
Drying Times | |
---|---|
314 Clear Floor Sealer | |
Touch Dry: | 4 hours @ 20 °C |
Hard Dry: | 12 hours @ 20 °C |
Full Hardness: | 5-7 Days @ 20 °C |
Minimum Overcoating Time: | 16 hours/overnight dry |
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Storage & Shelf Life
- Keep container tightly closed, in a cool, well ventilated place
- Keep containers upright
- See section 7.2 of the Safety Data Sheet for further information
Health & Safety
- Please refer to Material Safety Data Sheet for information
- 314 Clear Floor Sealer shall be applied strictly in accordance with the manufacturer’s instructions
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Manufacturer
- Rawlins Paints
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Concrete, Wood, Metal, GRP
- Application Method
- Brush, Roller
- Sheen
- Semi-Gloss
- Colour
- Clear
- Single, Two or Three Pack
- Single
- Dry to Recoat (at 20°C)
- 16 hours/overnight dry
- Fully Cured (at 20°C)
- 5-7 Days
- Coverage
- 11-12m²/litre
- Recommended Thinner/Cleaner
- White Spirit
- Solids by Volume
- 59%
- VOC
- 337g/litre
- Touch Dry
- 4 Hours
- Recommended Dry Film Thickness
- 50 - 60 microns
- Recommended Wet Film Thickness
- 100 microns
- UN Number
- UN1263
- Specific Gravity
- 1.11 @ 20 °C
- Viscosity
- 4.5 Poise @ 25 °C
- Hard Dry
- 12 hours @ 20 °C
- Base Type
- Solvent-Based
- Suitable For Use On
- Timber
- Suitable For Use On
- Metal
- Suitable For Use On
- Concrete
- Suitable For Use On
- Wood
- Suitable For Use On
- GRP Glass-Reinforced Plastic
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Components
- 1K
- Product Usage Type
- Sealer
- Fastest Delivery
- Next Working Day
- Product Category
- Paints
- Colour Family
- Clear
Questions
Question about the product
Joanna on 2018-08-04 03:19:54 | Question:
It this 314 Clear Sealer meant to be a tan brownish coloured liquid? |
Answer from Rawlins’ Technical Team:
In the tin yes, stir well and apply and the product dries clear. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
314 Clear Floor Sealer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Coo-Var Acid Etch
Acid etching solution designed to remove laitance and salts from concrete. For new concrete, power floated concrete floors, and exceptionally smooth surfaces. Non-flammable and water-soluble. Essential for ensuring proper adhesion of subsequent paint layers.
301 Industrial Floor Paint
A single pack, easy to use floor paint in 8 colours which dries to a semi-gloss finish. For use on masonry, wood, cement, concrete and many other surfaces. Easy to use, versatile and economical. Touch dry in just 2 hours @ 20 °C. No primer required for concrete (just dilute 1st coat with 10% white spirit).