- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Polyvine Multi-Surface Lacquer is an ultra hard, high quality, cross linked acrylic, sandable coating with a gloss/satin finish. This coating dries to a crystal clear film with extremely good sanding properties, allowing a very high quality of finish to be obtained.
- Specially formulated to bond to a wide range of interior and exterior surfaces: metal, laminate, timber, tile, ceramic, glass and plastics
- Water, stain and heat resistant
Quick Links - Click To Jump To Section:
Features & Benefits
- Specially formulated to bond to a wide range of interior and exterior surfaces:
- Ferrous & non-ferrous metal
- Laminate
- Timber
- Tile
- Ceramic
- Glass
- Plastics
- Ultra hard, high quality, cross linked acrylic
- Extremely good sanding properties
- Very hard and durable finish
- Water, heat, abrasion and stain resistant
- High gloss for a shiny finish, satin for depth and a soft sheen
- Highest gloss of all water based varnishes
- Approx. 15-20 sq. m per litre coverage
Application
- Ensure the surface to be coated is clean and free from grease, wax or polish
- Timber - remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust
- Ensure the product is well mixed but do not shake
- Apply the first coat and allow to dry. To prime porous surfaces, dilute with 10% water
- Apply one or two further coats
- 1-2 hour drying time
- Any equipment used can be cleaned using soap and water before the coating dries. Wipe any excess off surfaces with a damp cloth. Any dried deposits will need a paint stripper to remove them
Limitations
- Do not use on uncoated exterior timber
- Do not apply over uncured oil based paint. When applied over emulsion/latex paint, it is possible that the lacquer can draw certain stains through the paint, which would not otherwise be visible
- Always apply to a test area before starting work
Data sheet
- Manufacturer
- Polyvine
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Metal
Laminate
Timber
Tile
Ceramic
Plastic - Application Method
- Brush
- Sheen
- Gloss
Satin - Pack Size
- 1L
4L - Dry to Recoat (at 20°C)
- Up to 2 hours
- Coverage
- Approx. 15-20 sq. m per litre
- UN Number
- N/A
- Drying time
- 1 to 2 Hours @ 20°C. Low temperature/high humidity increases drying time.
- Fully Cured
- Up to 5 days @ 20°C
- Colour(s)
- Clear
- Base Type
- Water-Based
- Suitable For Use On
- Ceramics
- Suitable For Use On
- Laminated Surfaces
- Suitable For Use On
- Timber
- Suitable For Use On
- Metal
- Suitable For Use On
- Plastic
- Suitable For Use On
- Tiles
- Suitable For Use On
- Glass
- Application Method
- Brush
- Manufacturer
- PPG
- Components
- 1K
- Product Usage Type
- Lacquer
Questions
Question about the product
Claire on 2024-07-26 17:08:04 | Question:
Hi. I’m looking for a sealant for a mosaic Moroccan table so I can put it outside. Would this product be suitable? It would be used to eat off etc |
Answer from Rawlins’ Technical Team:
Assuming the surface is clean, dry, sound and prepared as detailed in the technical datasheet, this product could be applied for this type of application. We'd recommend applying to a small test area firstly to check for compatibility and adhesion, prior to fully coating. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Polyvine Multi-Surface Lacquer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT