Can this be used on EPDM flat roof to raise an area of ponding?

Unfortunately no, this is not suitable for application to an EPDM rubber roof.

Two questions, Can you use this product to fill ponding sections on a flat roof? Can you paint over this product once cured so the whole roof will be the same colour?

This product can't be painted, however if you could confirm additional information such as the type of surface/substrate for your project requirements, we maybe able to offer a suitable alternative. Please e-mail technical@rawlinspaints.com with further details for us to assist.

What depth range can this product be used and will it tigh into an existing ashfelt to create a water tight junction

This product can be used from 6mm to 20mm thick in one layer.

Hi. Can this material be applied at up to 25mm thick? ….. and still go off satisfactorily. We have some felted box gutters in a flat roof, and some have sagged causing puddling. The idea will be to pour on, squeege or trowel to level the proper fall required.

Thanks for your enquiry, as you e-mailed this through to the Technical team, we have replied directly to this request.

What area does a 5 kg tub do .

The coverage rate of this product will allow 1.25m2 at 3mm thick, or 1.85m2 at 2mm thick per 5kg tub.

Watco Roofite Pour & Restore

Reference RPR05

Brand Watco

Search ID WAT9371

A thick, flexible and highly watertight pourable-grade roof coating which can be applied by squeegee - enabling large areas of flat roof to be coated quickly and easily. Ideal for performing repairs to concrete, felt and asphalt.

Part of the Roofite range - a range of products to repair, protect and waterproof roofs
For the standard versions of this product please see Watco Roofite/Roofite Solar Reflective
Use to fill depressions to prevent puddling - Bridges minor cracks & splits
Reinforced with fibre and rubber
Large areas covered quickly and easily - For complete refurbishment or emergency repairs
Avoids costly re-roofing - Repairs leaks even in pouring rain
Single pack blend of rubber, fibre and fine aggregate in bitumen

Colour

Black

Size

£69.00(incl. VAT)

£57.50(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

5 questions about the product

Description

Watco Roofite Pour & Restore is a thick pourable product which can be squeegee applied, enabling large areas of flat roof to be coated quickly and easily. Leaves a thick waterproof, flexible coating. Ideal for performing repairs to concrete, felt and asphalt.

Watco Roofite can avoid the need for costly re-roofing. A unique blend of bitumen, rubber and tough fibre reinforcement that instantly weatherproofs and refurbishes roofs even in pouring rain.

Part of the Watco Roofite range of products to repair, protect and waterproof roofs:

Watco Roofite is the standard grade version of this product.

Watco Roofite Solar Reflective is a thick bitumen-based weatherproofer with aluminium flake added for extra solar reflective properties.

Bridge holes and gaps before applying Watco Roofite with Watco Roofite Scrim. Can be cut to size.

Watco Fibreglass Reinforcing Tape strengthens and waterproofs joints and cracks. Used when additional reinforcement is required.

Quick Links - Click To Jump To Section:

Features & Benefits
Surface Preparation
Application
Limitations

Features & Benefits

Areas of use include:

Asphalt
Concrete
Felted roofs

Part of the Roofite range - a range of products to repair, protect and waterproof roofs
For the standard version of this product please see Watco Roofite/Roofite Solar Reflective
Use to fill depressions to prevent puddling
Bridges minor cracks & splits
Reinforced with fibre and rubber
Just pour and spread with a squeegee
Large areas covered quickly and easily
For complete refurbishment or emergency repairs
Avoids costly re-roofing

Surface Preparation

Surfaces should preferably be as dry as possible - Emergency patch repairs can however be successfully completed to surfaces with running water
Remove any loose material and dirt
Very porous, dry surfaces should be primed with Watco Roofite/Roofite Solar Reflective diluted with 25% white spirit
A wire brush should be used to remove all traces of moss etc.
A fungicide may be required for heavily contaminated surfaces
Specialist advice must be sought when dealing with old asbestos/cement roofs - please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for details

Application

Pour with a coverage rate of 1.25m² at 3mm thick per 5kg and spread using a squeegee

Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] if you require any further information.

Limitations

Roofite/Roofite Solar Reflective are not suitable for coating bare wooden substrates in order to form a waterproofing seal
Entrapped moisture on porous surfaces may cause blistering in warm weather or spalling at low temperatures
Only limited emergency patch repairs should therefore be made to porous surfaces while wet
Not suitable for use on EPDM rubber roofs
Check compatibility with other surfaces if in doubt
In common with all bitumen based products, black Roofite will gradually weather to grey colour
For flat roofs which will be regularly walked on, please refer to Anti Slip Liquid Roof Membrane
Please contact us regarding applications not described here - contact our technical team for details on 0113 2455450 (option 2) or send a message to [email protected]

Product Details

Reference 9371-947859

Data sheet

Manufacturer: Watco
For Use By: Consumer Use
Interior / Exterior Use: Exterior Use
Water / Solvent Based: Solvent
For Use On: Concrete
For Use On: Asphalt surfaces
For Use On: Felt
Application Method: Squeegee
Single, Two or Three Pack: Single
Pack Size: 5kg
Mixing Ratio: N/A
Pot Life (at 20°C): N/A
Coverage: 1.25m² at 3mm thick. 1.85m² at 2mm thick
Recommended Thinner/Cleaner: White Spirit
Touch Dry: 24 hours in dry conditions.
UN Number (Activator): N/A
UN Number (Base): UN1263
Suitable For Use On: Tiles
Suitable For Use On: Asbestos
Suitable For Use On: Iron
Suitable For Use On: Concrete
Suitable For Use On: Flat Roofs
Suitable For Use On: Pitched Roofs
Suitable For Use On: Roof Tiles
Application Method: Brush
Application Method: Trowel
Application Method: Squeegee
Application Method: Sealant Gun
Product Usage Type: Repair
Product Usage Type: Sealer
Product Usage Type: Waterproofer
Product Range: Roofite
Colour Family: Black

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Safety Data Sheet - Aggregate

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Paul on 2024-09-17 11:43:44	Question: Can this be used on EPDM flat roof to raise an area of ponding?
	Answer from Rawlins’ Technical Team: Unfortunately no, this is not suitable for application to an EPDM rubber roof.

Miguel Leon on 2024-07-28 20:22:40	Question: Two questions, Can you use this product to fill ponding sections on a flat roof? Can you paint over this product once cured so the whole roof will be the same colour?
	Answer from Rawlins’ Technical Team: This product can't be painted, however if you could confirm additional information such as the type of surface/substrate for your project requirements, we maybe able to offer a suitable alternative. Please e-mail [email protected] with further details for us to assist.

Nick on 2024-03-12 14:10:49	Question: What depth range can this product be used and will it tigh into an existing ashfelt to create a water tight junction
	Answer from Rawlins’ Technical Team: This product can be used from 6mm to 20mm thick in one layer.

David on 2024-01-16 14:00:10	Question: Hi. Can this material be applied at up to 25mm thick? ….. and still go off satisfactorily. We have some felted box gutters in a flat roof, and some have sagged causing puddling. The idea will be to pour on, squeege or trowel to level the proper fall required.
	Answer from Rawlins’ Technical Team: Thanks for your enquiry, as you e-mailed this through to the Technical team, we have replied directly to this request.

Simon on 2023-08-04 14:42:29	Question: What area does a 5 kg tub do .
	Answer from Rawlins’ Technical Team: The coverage rate of this product will allow 1.25m2 at 3mm thick, or 1.85m2 at 2mm thick per 5kg tub.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Watco Roofite Pour & Restore is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Watco Liquid Roof Membrane

Reinforced anti-slip waterproof protection for roofs - roller applied, tough fibre reinforced polyurethane membrane to waterproof and seal flat and pitched roofs. No primer required Seals and protects roofs from water ingress Use on flat and pitched roofs and around existing pipe work and extrusions Ultra-tough, UV resistant membrane...

£120.00 (incl. VAT)

Shop now

In Stock and Available for Delivery

Watco Roofite

A unique blend of bitumen, rubber and tough fibre reinforcement that instantly weatherproofs and refurbishes roofs. Ideal for performing repairs to split, cracked, holed and porous asbestos, corrugated iron, concrete, tiled and felted roofs. Part of the Roofite range - a range of products to repair, protect and waterproof roofs Flexible –...

£296.40 (incl. VAT)

Shop now

In Stock and Available for Delivery

Watco Roofite Solar Reflective

A unique blend of bitumen, rubber and tough fibre reinforcement that instantly weatherproofs and refurbishes roofs and reflects heat. Ideal for performing repairs to split, cracked, holed and porous asbestos, corrugated iron, concrete, tiled and felted roofs. Part of the Roofite range - a range of products to repair, protect and waterproof...

£315.90 (incl. VAT)

Shop now

In Stock and Available for Delivery

Watco Roofite Reinforcing Scrim

For bridging holes and gaps in roofs before applying Watco Roofite/Roofite Solar Reflective. Part of the Roofite range - a range of products to repair, protect and waterproof roofs Can cut to size, used to bridge larger gaps and holes For exterior use More Information Delivery Info

£38.28 (incl. VAT)

Shop now

In Stock and Available for Delivery

Follow us on:

Watco Roofite Pour & Restore

Watco Roofite Pour & Restore

Quick Links - Click To Jump To Section:

Features & Benefits

Surface Preparation

Application

Limitations

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Watco Liquid Roof Membrane

Watco Roofite

Watco Roofite Solar Reflective

Watco Roofite Reinforcing Scrim