- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A glossy, tile-like polyurethane topcoat which produces a smooth, slick and tough, easy to clean surface. Carbothane 134 PU has very good resistance to splash and spillage af acids, alkalies, most solvents and excellent splash and spillage resistance to salts and water.
- Excellent weatherability, flexibility, and abrasion resistance
- 360+ colours available from RAL and British Standard
- Not for immersion service
- Industrial use only
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
A glossy, tile-like polyurethane topcoat which produces a smooth, slick and tough, easy to clean surface.
Carbothane 134 PU has very good resistance to splash and spillage af acids, alkalies, most solvents and excellent splash and spillage resistance to salts and water.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Preparation
- Application Equipment Guidelines
- Application Conditions
- Curing Schedule
Features & Benefits
- Excellent weatherability
- Excellent flexibility
- Excellent abrasion resistance
- Optimal protection with minimum layer thickness
- Excellent flow behavior with spray and roll application
- Available in 360+ colours from RAL and British Standard
- VOC compliant to current AIM regulation
Preparation
Surfaces must be clean and dry. Employ adequate methods to remove dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating.
Steel
Prime with specefic Carboline primers as recommended
Previously Painted Surfaces
Lightly sand or abrade to roughen and degloss the surface. Existing paint must attain a minimum 3b rating in accordance with ASTM D3359"X-Scribe" adhesion test. Prime with specific primers as recommended by Carboline or Rawlins Technical - call 0113 2455450 (option 2) or send a message to [email protected].
Application Equipment Guidelines
Listed below are general equipment guidelines for the application of this product. Job site conditions may require modifications to these guidelines to achieve the desired results.
Conventional Spray
Pressure pot equipped with dual regulators, 3/8"I.D. minimum material hose, 0.043"I.D. fluid tip and appropriate air cap.
Airless Spray
- Pump Ratio: 30:1 (min.)
- GPM Output: 3.0 (min.)
- Material Hose: 3/8” I.D.
- Tip Size: 0.015-0.017”
- Pressure BAR: 148-168
- Filter Size: 60 mesh
- Teflon packings are recommended and available from the pump manufacturer.
Brush & Roller (General)
The brush and roller are recommended only for retouching.
Brush
Use a medium natural bristle brush.
Roller
Use a short nap mohair roller that is suitable for 2k products.
Application Conditions
| Condition | Material | Surface | Ambient | Humidity |
|---|---|---|---|---|
| Minimum | 4°C | 4°C | 4°C | 0% |
| Maximum | 43°C | 54°C | 49°C | 85% |
Substrate temperatures should be 3°C above the dew point. This product is moisture sensetive in the liquid stage. Protect from high humidity, dew and direct moisture contact until fully cured. Application and/or curing in humidity above maximum, or exposure to moisture from rain or dew may result in a loss of gloss and/or micro bubbling of the product.
Curing Schedule
| Surface Temp. | Dry to Handle | Dry to Recoat | Final Cure |
|---|---|---|---|
| 4°C | 10 Hours | 10 Hours | 14 Days |
| 16°C | 6 Hours | 6 Hours | 10 Days |
| 24°C | 3 Hours | 3 Hours | 7 Days |
| 32°C | 30 Minutes | 30 Minutes | 5 Days |
These times are based on 50 micron dry film thickness. Higer fil thickness, insufficient ventilation or cooler temperatures will require longer cure times and could result in solvent entrapment and premature failure.
Product Details
9383-948618
Data sheet
- Manufacturer
- Carboline
- For Use By
- Industrial Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Brush, Roller, Spray
- Sheen
- High Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Mixing Ratio
- 7:1 (A to B)
- Mixing Ratio
- First mix seperately the two components carefully. Then add them together and mix again carefully. NEVER MIX PARTIAL KITS.
- Coverage
- 22 m²/l at 25 microns
- Recommended Thinner/Cleaner
- Spray: up to 20% with Thinner 25
For hot and/or windy conditions: up to 25% with Thinner 82.
Roller: up to 20% with Thinner 215 - Recommended Thinner/Cleaner
- Use Thinner 2 or Acetone
- Compatible Primers
- May be used over epoxies, urethanes and others as recommended. Typically applied as topcoat for CG 893, CM 15 /LT, CG 890, CZ 858 (P)
- Max. Application Temperature
- Continuous: 93°C
Non-Continuous: 121°C - Min. Application Temperature
- See product data sheet for details
- Solids by Volume
- 55 ± 2%
- VOC
- 430 g/l
- Recommended Dry Film Thickness
- 50 micron per layer
- UN Number
- UN1263
- Pot Life
- 4 Hours at 24°C and less at higher temperatures. Pot Life ends when coating becomes too viscous to use.
- Dry to Recoat
- 4°C: 10 Hours
16°C: 6 Hours
24°C: 3 Hours
32°C: 30mins - Fully Cured
- 2°C: 14 Days
10°C: 10 Days
24°C: 7 Days
32°C: 5 Days - Dry to Handle
- 4°C: 10 Hours
16°C: 6 Hours
24°C: 3 Hours
32°C: 30mins - Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Previously Painted Surfaces
- Finish
- High Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Components
- 2K
- Usages
- Abrasion Resistant
- Usages
- Flexible
- Usages
- Atmospheric
- Usages
- Tough/Durable
- Usages
- Weather Resistance
- Usages
- Easy to Clean
- Usages
- Chemical Resistance
- Product Usage Type
- Topcoat
- Product Range
- Carbothane
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
- Colour Family
- Anthracite Grey
- Colour Family
- Neutral
- Colour Family
- Cream
- Colour Family
- Violet
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Product Type
- Acrylic Polyurethane
- Environment
- Atmospheric
- Product Attributes
- High Solids
- Product Attributes
- Easy to Clean
- Product Attributes
- Flexibility
- Product Attributes
- Tough / Durable
- Resistance to
- Abrasion
- Resistance to
- Chemicals
- Resistance to
- Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Carboline Carbothane 134 PU is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT