- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Double-sided tape that replaces conventional adhesives and mechanical fixings for a range of substrates including metal, sealed concrete, masonry, wooden surfaces, ceramics, GRP (fibreglass) and plastics. The bonding power of this remarkable tape makes it ideal for mounting and fixing all sorts of things around the workplace.
Use with Watco Firmstep GRP Sheets for a quick and easy installation.
- Independently tested for adhesion strength
- Cushioned foam backing copes with lightly textured substrates
Quick Links - Click To Jump To Section:
Features & Benefits
- Areas of use:
- Mounting signs, mirrors or brackets on walls
- Mounting cladding, skirting and architrave
- Permanently fixing broken fixtures or equipment
- Where items would have otherwise been drilled, raw plugged and screw fixed
- Takes hold instantly
- Resists moisture and UV
- Replaces conventional fixings
- Easy to cut and apply
- Cushioned foam backing copes with lightly textured substrates
- Full bond strength achieved in 24 hours
- Independently tested for adhesion strength
Test Results
Subject | Result | Test Method |
---|---|---|
Adhesive | Acrylic | |
Carrier | Acrylic Foam | |
Total Thickness (mm) | 1.50 ± 50µm | ASTM-1000 |
Release Liner | Red PE | |
Tensile strength (gf/cm2 ) | 6000 | ASTM D-897 |
Peel adhesion (gf/25mm) | 4500 | ASTM D-3330 |
Holding Power | >24 hour | ASTM D-3654 |
Dynamic Shear Strength (gf/cm2) |
Before 20 minutes >4,000 After 24 hours >6,000 |
ASTM D1002 |
Max. Temperature | >100°C |
Surface Preparation
Clean with solvent wipe provided or a damp cloth but allow the surface to dry before application. Area must be dry and clean before application.
Unsealed surfaces
The tape will not bond to gritty, unsealed surfaces. For adhesion to unsealed concrete, brick, stone or similar surfaces, first prime with Watco Tape Primer. This rapid drying solvent based binding primer penetrates and binds dusty surfaces and can be overlaid with UltraBond Tape in as little as 30 minutes.
Application
Apply tape to one surface and cut to length. Remove the red backing tape. Allow the item that you are bonding to make light contact with the tape. If it needs repositioning carefully remove and correct it. Press firmly into place. If bonding a lightweight object the tape will ‘grab’ and hold immediately. If mounting a heavy object it may require support for up to 24 hours until the adhesive gains full strength.
Data sheet
- Manufacturer
- Watco
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Smooth or lightly textured and painted/ sealed surfaces. Sealed concrete, blocks and bricks, plastics, wood, composites, metals, glass and painted surfaces.
- Shelf Life (from date of manufacture)
- 24 months
- Categorised As
- Anti-Slip > Fixings
- Seasonal
- Cold Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Ultrabond Permanent Bonding Tape is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT