- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Watco Surestep Treads are an easy and highly effective way to improve safety. These tough treads have a top surface of resin-bonded aluminium oxide for a long lasting gritty finish. A heavy layer of pressure sensitive, water-resistant adhesive bonds the PVC backing to all smooth, non-porous surfaces.
- Suitable for stairs and steps with concrete, metal or wood surfaces
- Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations
You may need Watco Safety Tape Edge Sealer if the area will get very wet to help stop water penetrating under the adhesive.
Quick Links - Click To Jump To Section:
Features & Benefits
- Self-adhesive anti slip treads for instant step safety
- Easy to apply
- Tough, resin-bonded aluminium oxide provides a long lasting, gritty finish
- Water resistant pressure sensitive adhesive backing
- Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations
- Suitable for industrial and commercial use
- For stairs and steps with concrete, metal or wood surfaces
- Suitable for internal and external use - When used externally this product should be used with Safety Tape Primer
Application
Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer.
Smooth, non porous, dust free surfaces do not require priming. To improve Adhesion on weak, dusty surfaces, apply a coat of Watco Safety Tape Primer.
Avoid application at temperatures below 10°C. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place.
Firming down by hand or foot pressure is generally sufficient. Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.
Data sheet
- Manufacturer
- Watco
- For Use By
- Professional Use
- For Use By
- Industrial Use
- For Use On
- Concrete, brick, timber, stone, metal and painted surfaces.
- Min. Application Temperature
- 10°C
- Shelf Life (from date of manufacture)
- 24 months
- Product Range
- Surestep
- Product Type
- Tiles & Treads
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Surestep Treads is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT