- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Virtually indestructible, anti-slip, load-bearing grating for landings, walkways, ramps, production areas, and platforms.
Incredible strength, chemical resistance and anti slip properties make these resin gratings ideal for heavily used areas. Loose lay or fix to provide an instant, corrosion resistant, impact resistant floor. Will flex under point loading but recover to original position.
Free cut to size service for all Firm-Step products except Firm-Step Precision. When you place your order, leave a message at checkout (or contact us with your order number on 0113 2455450 or send a message to [email protected]) informing that you intend to install the product yourself and with your requirements. Please state per line the depth and width step sheets are to be cut to.
Quick Links - Click To Jump To Section:
Features & Benefits
- Ideal for landings, walkways, ramps, production areas, platforms
- Corrosion resistant and can be used inside or out
- Maintenance free with excellent impact resistance
- Keeps feet and products dry in constantly wet areas
- Use instead of metal or wood to create mezzanine and raised walkway areas
- Can be trimmed to size on site
- Contrasting coloured edge ramp available – easily connects to any size grating
- Made of fire retardent resin certified to BS476 Part 7 (Class 1)
- Incredible strength, chemical resistance and anti slip properties make these resin gratings ideal for heavily used areas. Loose lay or fix to provide an instant, corrosion resistant, impact resistant floor. Will flex under point loading but recover to original position
Preparation
If you need to cut the GRP product, a good quality abrasive disc, jigsaw or hacksaw can be used. The GRP material is quite tough to cut by hand, so if power tools are not readily available, please ask about our cut to size service. If appearance is critical we recommend the application of a small trial area first.
Fixing
This is either laid into a frame or fixed to an existing gantry etc. Fixing clips also available.
‘M’ and ‘L’ Clips: Set out where you will position each grating clip, a guide would be one in each corner and then every 500mm. Push the clips into the open mesh squares so that the clip sits neatly on the load bar(s) and the clip’s base is sitting close to the bottom of the grating panel.
If you are fixing directly on the existing surface, drill a pilot hole through the clip and into the substrate then fix using the appropriate screw and plug. If you are fixing into a support frame you will need to drill through the frame and then use a bolt fitting and tighten the washer and nut underneath the frame.
‘C’ Clips: Set out where you will position the grating clips, a guide would be one in each corner and then every 500mm. Join the two grating panels together and then slot over the ‘C’ clip and twist in place, simply tightening the bolt and nut.
Data sheet
- Manufacturer
- Watco
- For Use On
- Landings, walkways, ramps, production areas, platforms
- Single, Two or Three Pack
- Single
- Resistance to chemicals
- resistant
- Colour(s)
- Standard Colours
- Product Usage Type
- Tactiles
- Product Range
- Firm-Step
- Colour Family
- Yellow
- Fire Rating
- Made of fire retardent resin certified to BS476 Part 7 (Class 1)
- Categorised As
- Anti-Slip > Grating
- Seasonal
- Cold Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Firm-Step GRP Grating Edge Ramp is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT