- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Watco Surestep Tiles make slippery floor tiles safe.
- Suitable for stairs and steps with concrete, metal, wood or painted surfaces
- Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations
You may need Watco Safety Tape Edge Sealer if the area will get very wet to help stop water penetrating under the adhesive. One tube is sufficient for approximately 60 Watco Surestep Tiles.
Quick Links - Click To Jump To Section:
Features & Benefits
- Self adhesive: easy to apply
- Ideal for 6’’ quarry tiles or similar
- Tough, resin-bonded aluminium oxide provides a long lasting, gritty finish
- Water resistant pressure sensitive adhesive backing
- Suitable for industrial and commercial use
- Suitable for internal and external use
- Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations
Surface Preparation
Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer.
Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Watco Safety Tape Primer.
Application
Avoid application at temperatures below 10°C. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient.
Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.
Data sheet
- Manufacturer
- Watco
- For Use By
- Professional Use
- For Use By
- Industrial Use
- Coverage
- 140mm x 140mm per tile
- Min. Application Temperature
- 10°C
- Fully Cured
- 24 hours
- Suitable For Use On
- Stone
- Suitable For Use On
- Wood
- Suitable For Use On
- Previously Painted Surfaces
- Suitable For Use On
- Metal
- Suitable For Use On
- Concrete
- Suitable For Use On
- Brick
- Finish
- Textured
- Product Usage Type
- Tiles & Treads
- Product Range
- Surestep
- Colour Family
- Black
- Product Type
- Tiles & Treads
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Surestep Tiles is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Watco Safety Tape Edge Sealer
Protects tape edges from wear and water ingress. Use with any Watco Safety Tape or Surestep Tread Ideal for heavy traffic or wet areas Prolongs the life of the floor tape Easy to apply More Information Delivery Info
Watco Solvent Based Safety Tape Primer
Increases the adhesion of self-adhesive tapes and treads. Binds weak surfaces so that floor tapes will stick Ready in 30 minutes For use on porous dusty surfaces One coat brush application Water-based version also available More Information Delivery Info