- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Sika Parex Epoxy E200 Grout is an epoxy resin based anchor grout with high flow properties capable of placing in annular gaps 2 mm to 12 mm. Adhesion gained from the epoxy resin enables fixings into smooth walled holes such as diamond cored bores.
- Three part formulation gives good chemical resistance to most chemicals
- Stable to seawater, petroleum products, resists freeze thaw cycles
- Use in conjunction with Sika Parex E33 Winter Additive for lower temperature application
Quick Links - Click To Jump To Section:
Features & Benefits
- Uses:
- Base plates
- Rail tracks
- Starter bars and dowels
- Safety fences and balustrades
- Reciprocating machinery
- High impact loads
- 3 part formula
- Good chemical resistance to most chemicals
- Stable to seawater and petroleum products
- Resists freeze thaw cycles
- Tested to the relevant parts of BS 6319, BS 5080
Preparation
- Holes should be drilled using rotary percussive drills with air or water flush
- Diamond drilled holes may be roughened or under-reamed for extra anchorage values
- Holes drilled with non-flushing tools should be cleaned using a steel rotary brush
- Debris should be blown out of the hole using compressed air through an extension tube reaching the bottom of the hole
- Cast holes should taper so that the hole diameter is smaller at the mouth than the bottom
Mixing
- Pour contents of hardener bottle into plastic tub containing base resin
- Mix until homogeneous
- Slowly add the filler, continue to mix until smooth grout has been obtained
- Only use complete packs
- Each pack will yield approximately 0.65 litres of mixed material
Placing
- For holes angled below the horizontal to vertically downwards, pour mixed grout into prepared holes rodding if necessary to ensure grout flows to the bottom of the hole
- Insert bar into hole and gently twist and press home to the required depth
- Epoxy 200 may be placed at temperatures between 5°C and 45°C
Curing
- No special curing is required
- Fixings should be left undisturbed until grout has hardened
- Tools should be cleaned with solvent prior to grout setting
Data sheet
- Manufacturer
- Sika
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete
Mortar - Single, Two or Three Pack
- Three-Pack
- Pack Size
- 1.005KG
- Density
- 1550kg/m3
- Shelf Life (from date of manufacture)
- 12 months
- UN Number
- UN3082 (A)
UN2735 (B) - Pot Life
- 20 minutes
- Flammability
- Non-flammable
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Mortar
- Manufacturer
- Sika
- Components
- 3K
- Usages
- Concrete Repair
- Product Range
- Parex
- Categorised As
- Repairs > Low Temperature Grouts
- Seasonal
- Cold Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sika Parex Epoxy E200 Grout is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT