Follow us on:

Sika Parex Epoxy Putty LS | Epoxy Resin Based Filled Adhesive

Sika Parex Epoxy Putty LS

660310
SIK9588

Parex Epoxy Putty LS is an epoxy resin based, filled adhesive. The three component product, based on Epoxy Putty, consists of a base resin, hardener and bag of specially graded fillers. The resultant thixotropic product can be applied horizontally, vertically and overhead (with care).

  • Easy to place using hand tools which include notched trowels, floats and even by extrusion out of a cartridge
  • give structural support of the highest degree and will act as a high strength support for arises, cladding, steel and precast concrete elements

Please Note: This product is made to order subject to a lead time of 28 Working Days.

Size
£195.20(incl. VAT)
£162.67(ex. VAT)
Quantity
Please choose your colour
The Product may be Subject to Extended Lead Times

No queries yet, leave the first!
Description

Quick Links - Click To Jump To Section:




Features & Benefits


  • Uses include:
    • Bedding applications to support precast concrete units, lift shafts, steel stanchions, machines, wooden blocks and baulks, anti-vibration units
    • Bedding steel plates on bridge soffits and decks. Use in conjunction with Tecgrip Resin Anchor Materials – Plate Bonding
    • Fixing of chemical resistant tiles in aggressive environments
    • Fixing of granite marble and stone cladding
    • Fixing of dollies for test purposes
    • Uprating corroded bridge steelwork by the adhesion and bolting technique
    • Bedding of rails on plates for mobile storage applications, eg libraries and document storage
  • Structural support of the highest degree
  • Acts as a high strength support for arises, cladding, steel and precast concrete elements
  • Resistant to a wide range of chemicals including petroleum products and chloride ions
  • Freeze/thaw stable
  • The natural colour is light grey (near RAL 7030). Suitable mineral pigments may be added to adjust for architectural purposes. (Speak to our Technical Services Dept).
  • Tested in accordance with the relevant parts of BS 6319 and EN 1542



Preparation


  • Remove laitance and all loose material including dust, oil, and grease to achieve a sound substrate
  • Concrete surfaces should be mechanically abraded to produce a mechanical key for critical situations
  • Lift shaft surfaces with physical corner location points should refer to engineer’s instructions
  • It may be necessary to infill significant holes in substrates and we refer you to Epoxy Mortar E or EFG
  • Steel surfaces should be free of mill scale and rust, for ‘plate bonding’ refer to standard preparation details
  • Badly corroded steel should be cleaned back to bright metal
  • For the majority of work no priming is necessary. For particularly difficult substrates eg porous concrete contact the Technical Services Dept



Mixing


  • All components must be used to complete the mix as the ratio of base to hardener is critical
  • Pour all the resin into the provided mixing bucket or clean mixing vessel
  • In cold conditions, less than 10o C, the base becomes thick.
  • The hardener may be added to the depleted base bottle and used to ‘wash out’ the remnants of the bottle. This may be achieved by replacing the bottle top and shaking the contents for 20 seconds - add this to the base
  • Mix with a slow speed, high torque electric drill c/w mortar stirrer until homogenous
  • Add the filler slowly whilst continuously mixing
  • After all the filler has been added mix for a further minute until an even colour and powder distribution has been achieved



Placing


  • Depending on the application, place the mixed material onto the prepared surface using a notched trowel, float or suitable hand tool
  • Ensure that the applied material is worked well into edges and irregularities
  • The cleaning off of exuded material can be carried out when the Epoxy Putty LS has just started to set or mechanically once the material has cured
  • Protection of aesthetic edges and details should be undertaken prior to application
  • Product to be placed by hand gun can be mixed and carefully placed in a disposable one litre cardboard cartridge and injected
  • No special curing practice is required
  • Solvent should be used to clean tools and mixing equipment before setting of the Epoxy Putty LS
  • Removal of set material will be difficult and will require mechanical methods. Solvent plus clean dry gravel can be an effective stirrer cleanser.



Limitations


  • Epoxy Putty LS will not set at temperatures less than 5o C
  • Application thicknesses range from feather edge to a nominal 3mm
  • For tile and stone cladding applications use notched trowel with maximum 6mm tooth width



Product Details
9588-966035

Data sheet

Manufacturer
Sika
For Use By
Professional Use
For Use On
Concrete
Steel
Application Method
Trowel
Single, Two or Three Pack
Three-Pack
Pack Size
10.08KG
Tensile Strength
13.2N/mm² @ 7 Days
Flexural Strength (at 20°C)
21N/mm² @ 7 Days
Max. Application Temperature
45°C
Min. Application Temperature
5°C
Density
1850kg/m3
Shelf Life (from date of manufacture)
12 months
UN Number
UN3082 (A)
UN2735 (B)
Pot Life
65 minutes
Compressive Strength
1 day: 73N/mm²
3 days: 80N/mm²
7 days: 85N/mm²
Suitable For Use On
Concrete
Suitable For Use On
Steel
Application Method
Trowel
Manufacturer
Sika
Components
3K
Usages
Concrete Repair
Product Usage Type
Adhesive
Product Range
Parex
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Sika Parex Epoxy Putty LS is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT