- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A high gloss polyurethane topcoat, offering excellent gloss retention and resistance to chemical and atmospheric attack.
- Base only; must be purchased and mixed with one of Hardener 9004 Standard, Hardener 9027 Wintermix, or Hardener 9018 before use
- Select from the drop-down menus below
- Quick drying
- Spray or pressure-pot application
- Available in 3,500 colours from RAL, NCS, and British Standard
- Part of the CFB 2K System
- Use with CFB 2K Primer to provide corrosion protection on steel substrates for ACE (Agricultural and Construction Equipment) markets
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Quick Links - Click To Jump To Section:
Technical Data
| Data | |
|---|---|
| Maximum VOC Content (RFU) | 0.550Kg/L |
| Specific Gravity | 1.11.3 dependent on colour |
| Solids By Volume | 45.00% |
| Coverage | 10 square metres per litre @ 45 microns DFT |
| Flashpoint | 24°C |
| Storage | Store between 5°C 25°C. When not in use, cans must be kept sealed |
Application
| Application Methods | |||
|---|---|---|---|
| Compliant Spray Gun | Pressure Pot | Airless/Air Assisted | |
| Mixing Ratio |
Base - 5 Hardener - 1 Thinner - up to 17% |
Base - 5 Hardener - 1 Thinner - up to 17% |
Base - 5 Hardener - 1 |
| Hardener Options - must be purchased and mixed with an applicable activator/hardener before use |
Hardener 9018 |
||
| Thinner Options | |||
| Viscosity |
2225secs seconds B4 cup |
2225secs seconds B4 cup |
30secs seconds B4 cup |
| Spray Gun Setup | 1.4-1.6 | 1.4-1.6 | 9-11 thou |
| Number of Coats (Guide Only) | 1-2 full coats | 1-2 full coats | 1 full coat |
| Flash Off | 20 mins between coats | ||
| Drying Time |
Touch dry - 1 hour @ 20°C Hard dry - 4 hours @ 20°C |
||
| Overcoating | 16 hours max without flatting | ||
| Pot Life | 3 hours maximum | ||
| Wet Film Thickness* | 100 microns | ||
| Dry Film Thickness* | 40-45 microns | ||
*HMG Technical Data Sheets indicate a Dry Film Thickness that will be achieved when applying a particular Wet Film Thickness. These values are a guide only and are not to be used as specifications. Film thickness will vary depending on actual use and specification. Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process.
Product Details
9628-965723
Data sheet
- Manufacturer
- HMG
- For Use By
- Consumer Use
- For Use On
- Steel
- Application Method
- Compliant Spray Gun
Pressure Pot
Airless/Air Assisted - Sheen
- High Gloss
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 15L
- Mixing Ratio
- 5:1 (base:hardener)
- Touch Dry (at 20°C)
- 60 mins
- Coverage
- 10 square metres per litre @ 45 microns DFT
- Solids by Volume
- 45%
- VOC
- 0.550Kg/L
- Recommended Dry Film Thickness
- 40-45 microns
- Recommended Wet Film Thickness
- 100 microns
- UN Number
- UN1263
- Pot Life
- 3 hours maximum
- Dry to Recoat
- 16 hours max without flatting
- Specific Gravity
- 1.11.3 dependent on colour
- Hard Dry
- 4 hours @ 20°C
- Flashpoint
- 24°C
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Primed Surfaces
- Finish
- High Gloss
- Application Method
- Spray
- Manufacturer
- HMG Paints LTD
- Usages
- Chemical Resistance
- Usages
- Gloss Retention
- Usages
- Atmospheric
- Usages
- Atmospheric Polution Resistance
- Product Usage Type
- Topcoat
- Colour Family
- Purple
- Colour Family
- Grey
- Colour Family
- Black
- Colour Family
- Blue
- Colour Family
- Neutral
- Colour Family
- Brown
- Colour Family
- Stone
- Colour Family
- Orange
- Colour Family
- Beige
- Colour Family
- Yellow
- Colour Family
- Green
- Colour Family
- White
- Colour Family
- Red
- Colour Family
- Metallic
- Colour Family
- Pink
- Colour Family
- Anthracite Grey
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 60 mins
- Product Attributes
- Tough / Durable
- Resistance to
- Atmospheric Polution
- Resistance to
- Chemicals
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG CFB 2K Topcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
HMG Hardener 9027 Wintermix
HMG Hardener 9027 Wintermix is a fast curing, medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) Option 1: HMG Acrythane SC601 Colours Option 2: HMG Polykote 2K AMC Primer Option 3: HMG...
Price
£25.63
(incl. VAT)
In Stock and Available for Delivery
HMG Hardener 9004 Standard
HMG Hardener 9004 Standard is a medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane SC601 Colours HMG Acrythane 102 HMG 2K Multi Surface Topcoat HMG Polykote 2K AMC Primer...
Price
£31.16
(incl. VAT)
In Stock and Available for Delivery