- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Parex Eproseal is a blend of Portland cements, quality graded aggregates and chemical modifiers which provide a waterproof cement based coating system for masonry and concrete.
- Excellent adhesion to construction surfaces and is safe to apply on damp substrates
- Suitable for tanking of basements, sealing of tanks and ducts, coating of brick and blockwork structures, lining of storage tanks for potable water
Please Note: This product is made to order subject to a lead time of 28 Working Days.
Quick Links - Click To Jump To Section:
Features & Benefits
- Suitable for:
- Tanking of basements
- Sealing of tanks and ducts
- Coating of brick and blockwork structures
- Lining of storage tanks for potable water
- Mixed with water on site and applied by brush or spray
- Special mix design produces excellent adhesion to construction surfaces
- Safe to apply on damp substrates
Preparation
- All contact surfaces must be clean and sound
- Remove all loose material, laitence, dust and any previous coating
- Tap off water pressure where necessary and cut out a 20mm x 20mm fillet at the junction of the wall and the floor
- Repair any existing cracks and fractures with Aquaplug or FS Mortar as necessary
- No priming is necessary
- On dry surfaces, to assist the coating in fully wetting out the substrate, this background should be dampened
Mixing
- Water requirement to produce the coating is 7.5 to 8.5 litres per 25 kg of dry material
- Pour the required quantity of water into a suitable mixing vessel
- Slowly add the powder to the water whilst continuously mixing
- Mechanical mixing is recommended using a slow speed high torque drill with a Mortar Stirrer
- Mixing should be continued for three minutes after all the powder has been added to the mixing water to obtain a “creamy” consistency
Application
- Eproseal is applied in two coats
- Brush or spray apply the first coat in a horizontal direction down to the fillet level
- After 24 hours seal fillet with Aquaplug leaving weep holes free
- Apply a second coat of Eproseal in a vertical direction covering the fillet with the coating
- Remove weep hole taps and seal with Aquaplug
- If leaks occur, drill 12mm holes adjacent to the leak and seal with Aquaplug
- Do not retemper stiffened material
- Eproseal should not be applied to frost filled surfaces or when temperature is 5°C and falling
- In warm or windy conditions, mist spraying may be used to compensate for moisture loss
- In tanking applications a through flow of air is required to prevent condensation
Data sheet
- Manufacturer
- Sika
- For Use On
- Masonry
Concrete
Brick
Blockwork
Potable water tanks - Application Method
- Brush
Spray - Pack Size
- 25KG
- Mixing Ratio
- : 7.5 to 8.5 litres per 25kg unit.
- Coverage
- Course surface: 2.5 to 3kg/m2 /coat, 8.3 to 10.0m2 per 25 kg unit
Smooth surface:2 to 2.5kg/m2 /coat, 10.0 to 12.5m2 per 25 kg unit - Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 6 months
- Suitable For Use On
- Masonry
- Suitable For Use On
- Brick
- Suitable For Use On
- Concrete
- Suitable For Use On
- Blockwork
- Application Method
- Brush
- Application Method
- Spray
- Manufacturer
- Sika
- Components
- 1K
- Product Range
- Parex
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sika Parex Eproseal is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT