- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A Portland cement powder mix designed for easy mixing and placing in shafts and tunnel areas. The mixed product may be hand applied into caulking grooves within segmental concrete linings.
- Uses include:
- Caulking of pre-cast concrete segmental tunnel linings
- Filling of bolthole entry points to protect steel bolt heads
1-component, cementitious, caulking mortar. Used to improve water- resistance to segmental tunnel joints, and for capping off bolthole pockets. Once applied it is easily finished to the required profile. 28-day compressive strength ~23MPa.
Quick Links - Click To Jump To Section:
Features & Benefits
- May also be used to cap off bolthole pockets
- Contains a blend of Portland cements, pulverised fuel ash, high quality graded silica sands and additives to assist with mixing, placing and hardening
- Once applied is easily finished to the required profile
- Chloride free and is safe to use in contact with steel elements
- Packed in 25kg plastic bags. The yield obtained from each bag mixed with 4.75 litres of water is approximately 16 litres of mixed material.
Typical Mortar Properties @ 20°C
Compressive Strength
1 Hour | 1 Day | 7 Days | 28 Days |
---|---|---|---|
0.5N/mm2 | 7N/mm2 | 14N/mm2 | 23N/mm2 |
Usable Life: Approximately 20minutes depending on specific use.
Density: 1860 kg/m3
Standards: Terracaulk 30 has been tested in accordance with the appropriate parts of EN 12390.
Instructions For Use
Preparation
Contact surfaces should be sound and clean. Slight dampening of the surfaces will assist adhesion.
Priming
No priming is necessary other than the slight dampening of the contact surfaces. Any standing water must be removed.
Mixing
Terracaulk 30 is supplied in 25kg bags. The water requirement to achieve a good caulking mortar is 4.75 litres to 5.00 litres per 25kg bag. Pour the required quantity of water into a suitable mixing vessel. Slowly add the powder to the water whilst continuously mixing. Mechanical mixing should be used if required using a slow speed high torque drill with a Mortar Stirrer or a forced action mixer such as the Creteangle.
Placing
Ensure contact surfaces are clean from dust and are dampened prior to placing the mixed mortar.
Curing
No specific curing is required. Placed material should be protected from drying out too quickly.
Data sheet
- Manufacturer
- Sika
- For Use On
- Steel
Concrete - Pack Size
- 25KG
- Mixing Ratio
- 4.75 to 5.0 litres water
- Pot Life (at 20°C)
- Approximately 20minutes depending on specific use
- Coverage
- Packed in 25kg plastic bags. The yield obtained from each bag mixed with 4.75 litres of water is approximately 16 litres of mixed material.
- Size
- 25KG
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Manufacturer
- Sika
- Components
- 1K
- Usages
- Concrete Repair
- Product Usage Type
- Mortar
- Product Range
- Parex
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sika Parex Terracaulk 30 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT