- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Description
Quick Links - Click To Jump To Section:
- Catalyst Addition Levels when using Swarcoplast Primer Roll 120 (previously CM Primer)
- Catalyst Addition Levels when using PumaTrack
- Catalyst Addition Levels when using PumaBrite
Catalyst Addition Levels when using Swarcoplast Primer Roll 120 (previously CM Primer)
| Substrate temperature (ºC) | Primer pack size (kg) | BPO powder catalyst required (g) |
|---|---|---|
| 0-5 | 10 | 600 |
| 5-15 | 10 | 400 |
| 15-25 | 10 | 200 |
| 25-40 | 10 | 100 |
| Substrate temperature (ºC) | Primer pack size (kg) | BPO powder catalyst required (g) |
|---|---|---|
| 0-5 | 20 | 1200 |
| 5-15 | 20 | 800 |
| 15-25 | 20 | 400 |
| 25-40 | 20 | 200 |
The catalyst level is critical – the minimum catalyst level is 50g per 10Kg or 100g per 20kg pail. Using less catalyst will cause partial curing and lead to product failure. Excessive levels of catalyst can lead to premature gelling and curing, which can lead to reduced adhesion to the substrate and product failure.
When using the minimum catalyst level during hot temperatures, extra time should be given to stir the mixture to ensure the catalyst mixes in fully, to prevent any curing issues.
Immediately prior to use, stir the binder thoroughly using a mechanical mixer until the resin is fully homogenised. Add the correct amount of BPO powder catalyst and mix thoroughly for at least 30 seconds. Ensure that the binder at the bottom and sides of the container is completely mixed in. Do not delay once the catalyst has been added, a chemical reaction is occurring that if left in the pail will ruin the mix.
Catalyst Addition Levels when using PumaTrack
| Substrate temperature (ºC) | PumaTrack pack size (kg) | BPO powder catalyst required (g) |
|---|---|---|
| 0-5 | 20 | 500 |
| 5-15 | 20 | 400 |
| 15-25 | 20 | 200 |
| 25-40 | 20 | 100 |
The catalyst level is critical – the minimum catalyst level is 100g per 20kg pail. Using less catalyst will cause partial curing and lead to product failure. Excessive levels of catalyst can lead to premature gelling and curing, which can lead to reduced adhesion to the substrate and product failure.
Immediately prior to use, stir the binder thoroughly using a mechanical mixer until the resin is fully homogenised. Add the correct amount of BPO powder catalyst and mix thoroughly for at least 30 seconds. Ensure that the binder at the bottom and sides of the container is completely mixed in. Do not delay once the catalyst has been added, as a chemical reaction is occurring that if left in the pail will ruin the mix.
Catalyst Addition Levels when using PumaBrite
| Substrate temperature (ºC) | PumaBrite pack size (kg) | BPO powder catalyst required (g) |
|---|---|---|
| 0-5 | 10 | 250 |
| 5-15 | 10 | 200 |
| 15-25 | 10 | 100 |
| 25-40 | 10 | 50 |
| Substrate temperature (ºC) | PumaBrite pack size (kg) | BPO powder catalyst required (g) |
|---|---|---|
| 0-5 | 20 | 500 |
| 5-15 | 20 | 400 |
| 15-25 | 20 | 200 |
| 25-40 | 20 | 100 |
The catalyst level is critical – the minimum catalyst level is 0.5% (100g per 20kg pail or 50g per 10kg pail). Using less catalyst will cause partial curing and lead to product failure. Excessive levels of catalyst can lead to premature gelling and curing, which can lead to reduced adhesion to the substrate and product failure.
Immediately prior to use, stir the pail thoroughly using a mechanical mixer until the resin is fully mixed. Add the correct amount of BPO powder catalyst and mix thoroughly for at least 30 seconds. Ensure that the binder at the bottom and sides of the container is completely mixed in. Do not delay once the catalyst has been added, as a chemical reaction is occurring that if left in the pail will ruin the mix.
Product Details
9717-968142
Data sheet
- UN Number
- UN3106
- Product Usage Type
- Catalyst
- Categorised As
- Accessories > Hardeners & Activators
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Swarco Hitex BPO Powder Catalyst is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Swarco Hitex Swarcoplast Pumabrite Reflective Road Marking Paint
MMA cold plastic road marking materials, engineered to achieve the highest levels of retroreflectivity, durability, adhesion and colour stability. PumaBrite is suitable for structured (Type 2) enhanced wet night reflectivity, centre and edge line markings, junction markings, letters, arrows and other road marking symbols, smaller scale works...
Price
£62.56
(incl. VAT)
In Stock and Available for Delivery
Swarco Hitex Swarcoplast PumaTrack Cycle Path and Walkway Paint
Coloured MMA Road Surface Treatment. Quick and easy to install and ideal for walkways and cycle paths, PumaTrack surface treatment is engineered to achieve the highest levels of durability, adhesion and colour stability. Smooth or textured finish, depending on application. Separate hardener (BPO Powder Catalyst) required, levels depend on...
Price
£78.53
(incl. VAT)
In Stock and Available for Delivery
Swarco Hitex Swarcoplast Primer Roll 120
Primer for Swarco Hitex Puma MMA systems on metal and concrete substrates (e.g. iron, aluminium, stainless steel), with excellent adhesion. Previously known as CM Primer Easy to apply Separate hardener (Hitex BPO Powder Catalyst) required, levels depend on substrate temperature More Information Delivery Info Hitex BPO Powder Catalyst...
Price
£335.22
(incl. VAT)
In Stock and Available for Delivery