- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Water based, ready to use viscous paste which may be brush or spray-applied to stone wool slabs.
- Used to further improve the fire resistant properties of Rockwool stone wool slabs.
- The ablative nature of the coating resists flame spread and forms an insulated char which protects the stone wool slab.
The Ablative Liquid is available separately to enable site repairs to Firepro Ablative Coated Batt, that may have been damaged during installation.
Ablative Coated Batt is intended to act as an air seal barrier to reinstate the fire resistance and acoustic performances of concrete floors, masonry walls and dry wall systems when voids have been created for the passage of services. This includes pipes made of plain or stainless steel, cast iron, copper, polypropylene (PP), high density polythene (HDPE ), PVC and ABS along with all sheathed cables up to 80mm and supported cable bundles up to 100mm
Quick Links - Click To Jump To Section:
Features & Benefits
- Suitable for spray or brush application
- Dries to give a sound, flexible white surface finish
- Provides a stable surface for adhesive and fixing sealants
Performance
Firepro Ablative Liquid is designed to re-seal the surface of Firepro Ablative Coated Batt where damage to the ablative coating may have occurred during installation.
Firepro Ablative Coated Batt has been tested to the dedicated fire resistance standard for penetration seals EN 1366-3. Ablative Coated Batt fire resistance tests were conducted using Firepro Acoustic Intumescent Sealant and/ or Firepro Glue.
Firepro Ablative Liquid and stone wool slabs may only be used to fire protect service penetrations if supported by independent fire test evidence due to the variants in the density and thicknesses of stone wool slabs available.
Application
- Please see Product Data Sheet and Installation Guide for detailed installation instructions.
- Can be spray or brush applied
- Application temp range: +10ºC to +30ºC
- Vice temp range -15ºC to +75ºC
- Shelf life up to 12 months when stored in unopened containers under cool dry conditions. Avoid frost and extremes of temperature
- Durability up to 15 years when used as recommended
Data sheet
- Manufacturer
- Rockwool
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Stone wool slabs
- Application Method
- Spray, brush
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Max. Application Temperature
- +30ºC
- Min. Application Temperature
- +10ºC
- Specific Gravity
- 1.3 – 1.4
- pH
- 8.5 – 9.2
- Colour(s)
- White
- Base Type
- Water-Based
- Suitable For Use On
- Stone Wool Slabs
- Application Method
- Brush
- Application Method
- Spray
- Manufacturer
- Rockwool
- Product Usage Type
- Repair
- Product Range
- Firepro
- Colour Family
- White
Questions
Question about the product
GEORGE DAY on 2022-12-17 08:53:14 | Question:
Hi What is the fire rating of the ablative liquid. I have a wall lining in a data riser with limited access and require 1 hour fire rating[ the existing wall is plastered] thanks Please respond urgently thanks |
Answer from Rawlins’ Technical Team:
Firepro Ablative Liquid is designed to re-seal the surface of Firepro Ablative Coated Batt where damage to the ablative coating may have occurred during installation. Firepro Ablative Liquid and stone wool slabs may only be used to fire protect service penetrations if supported by independent fire test evidence due to the variants in the density and thicknesses of stone wool slabs available. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rockwool Firepro Ablative Liquid is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rockwool Firepro Glue
Water based, fire resistant adhesive suitable for use with FirePro Beamclad and Rockwool Fire Duct Systems where glued joints or noggins are required. Can be used in conjunction with other Rockwool Stone Wool products where there is a requirement for a fire resistant adhesive Authorised for use in LUL surface and sub-surface premises and...
Rockwool Acoustic Intumescent Sealant
High specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of Rockwool Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates. Up to 4 hours* fire protection Used to reinstate the fire resistance of wall and...
Rockwool 50mm Ablative Coated Batt
A high-density stone wool core, pre-coated on both sides with our high-performance ablative coating. Ablative Coated Batt has been comprehensively tested as part of the Rockwool Firepro range of fire protection products, specifically for use in service penetrations, head of wall and other void seals. Provides fire stopping solutions in...
Rockwool 60mm Ablative Coated Batt
A high-density stone wool core, pre-coated on both sides with our high-performance ablative coating. Ablative Coated Batt has been comprehensively tested as part of the Rockwool Firepro range of fire protection products, specifically for use in service penetrations, head of wall and other void seals. Provides fire stopping solutions in...