Intumescent Pipe Wraps CE are designed to seal service penetrations in apertures containing combustible plastic pipes. Pipe Wraps CE comprise layers of a graphite based intumescent sheet encapsulated in a polythene sheath. All Pipe Wraps CE are supplied in correct lengths to suit the pipe diameter.

Intumescent Pipe Wraps CE are tested to plastic services penetrating flexible andrigid wall constructions, rigid floors and in Ablative Coated Batt seals.

Pipe Wraps CE are tested with end capping configurations that cover U/C pipes.

Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Installation

Features & Benefits

• Fire stopping plastic pipe penetrations in rigid/flexible walls and rigid floors
• Can be applied to PVC, UPVC, Polypropylene, PE & HDPE pipe materials
• Simple to install with no mechanical fixings required
• Available to suit pipe diameters up to 250mm O.D
• Up to EI 120* fire resistance
• Tested in conjunction with Ablative Coated Batt seals
• Dry system
• Water resistant
• Can provide up to 2 hours* fire protection to plastic pipework where it passes through fire rated walls and floors. 
• Certified by UL and CE marked to EAD 350454-00-1104

*Subject to application.

Installation

• Please see Product Data Sheet and Installation Guide for detailed installation instructions.
• The product is intended to be wrapped around the outside diameter of the pipework and is secured by means of a self-adhesive strip
• Apertures or core holes in the separating element shall be maximum oversize with respect to the pipe diameter as follows:
  • 32mm - 50mm OD = 4mm
  • 160mm OD = 10mm
  • 200mm OD = 12mm
  • 250mm OD = 14mm
• Pipe Wrap CE is then positioned each side within the compartment wall or floor so that the edge of the product is left exposed at the face of the wall or soffit
• The remaining annular space/gap shall be infilled using Firepro Acoustic Intumescent Sealant or for larger void sizes, the Intumescent Pipe Wrap CE can be sealed into the structure with Rockwool Firestop Compound
• Under fire conditions, the intumescent material expands against the structure and fills the void left by the burnt out plastic
• Intumescent Pipe Wraps CE are used to prevent fire penetration in plastic pipes that pass through fire rated walls and floors for a specified period of up to 2 hours. They are manufactured as a sealed unit to the correct length and width to suit the pipe diameter and fire rating
• Walls should be a minimum of 100mm thickness and floors a minimum 150mm thickness
• All walls should have the same or improved period of fire resistance as that required of the sealing system
• Services should be supported no further than 400mm from the surface of the separating element for walls and 400mm above the surface of the floor.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.