- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A high-density stone wool core, pre-coated on both sides with our high-performance ablative coating.
Ablative Coated Batt has been comprehensively tested as part of the Rockwool Firepro range of fire protection products, specifically for use in service penetrations, head of wall and other void seals.
- Provides fire stopping solutions in walls and floors, reinstating the fire resistance
- Tested for acoustic and air leakage performance
- Provides up to 4 hours fire resistance
Also available: Rockwool 50mm Ablative Coated Batt
Quick Links - Click To Jump To Section:
Features & Benefits
- Suitable for multiple substrates including:
- Solid walls and floors; flexible walls
- Multi-service penetrations
- Head of wall
- Blank seals
- Face-fixed applications
- Can provide fire resistance from a single thickness batt
- Suitable for sealing 20m long x 1.2m high voids at head of wall
- Suitable for large unframed voids up to 7.02m²
- Tested with dampers
- Tested as part of the Firepro suite of solutions
- Lightweight and simple to install
- Tested for air tightness, providing an additional smoke and acoustic seal
Performance
- Tests have proved the capability of a single 60mm Batt to provide up to 4 hours fire resistance Integrity and Insulation ratings which are dependent upon the service penetrations and void size. Where 2 hours integrity and insulation are required we recommend the use of our 50mm Ablative Coated Batt
- 50mm Ablative Coated Batt has been certified by UL and CE marked to EAD 350454-00-1104.
Acoustic Performance
Tested for head of wall:
- Rw= up to 52db (2 x Coated batts)
- Rw= up to 38db (1 x Coated batts)
The correct use of Coated batt within concealed cavities and voids will reduce the level of transmitted sound:
- Rw= up to 52 db (2 x Coated batts) - incorporating 48mm O/D PVC /15mm copper pipe penetrations
- Rw= up to 34 db (1x Coated batts) - incorporating 48mm O/D PVC /15mm copper pipe penetrations
Installation
- Please see Product Data Sheet and Installation Guide for detailed installation instructions.
- Make sure that the area within the aperture is clean of any debris and remove any dust from the edges
- Cut Batt to the size and shape required to fit the aperture ensuring that batt will make a tight fit with all edges of the aperture
- Cut rectangular holes from the coated batt to accommodate cable trays or ladders containing cables
- Cut the Coated Batt across its width at the mid-point of each rectangular hole to enable the Batt to be fitted into the aperture
- Apply Rockwool Acoustic Intumescent Sealant to all edges of the Batt ensuring that an even cover is achieved over
the entire thickness of the Batt. This should include the outer edges of the Batt and the edges of the cuts made across the
Batt to allow fitting into the aperture - Insert the Batt into the aperture
- Apply a bead of Acoustic Intumescent Sealant approximately 15mm wide around the perimeter of the Batt
ensuring that all gaps between the Batt and surrounding edges are fully filled - Apply a bead of Acoustic Intumescent Sealant approximately 15mm wide where cables pass through the
Batt. Ensure that the sealant fully enclosed each cable within the tray or ladder and that all gaps are fully filled.
9. Repeat step 7 and 8 on the other side of the Batt - For any areas of Batt where the coating has been damaged, repaint with the Ablative Coating. Ensure that there is no
uncoated slab or bare mineral wool visible - Batts are not intended for use as load-bearing seals. Where a load bearing seal is required, Rockwool Firestop Compound should be considered
- For seals over 1200mm x 1200mm Batt to Batt joints are to be fully coated with Firepro Glue
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Manufacturer
- Rockwool
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Voids in walls and floors
- Single, Two or Three Pack
- Single
- Pack Size
- 60mm x 600mm x 1200mm
- Density
- 180kg/m³
- Suitable For Use On
- Floor Voids
- Suitable For Use On
- Wall Voids
- Manufacturer
- Rockwool
- Product Usage Type
- Batt
- Fire Rating
- 240 Minutes
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rockwool 60mm Ablative Coated Batt is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rockwool Firestop Compound
Specially formulated gypsum-based compound, which is mixed with water to be trowelled or poured around service penetrations. As part of the comprehensive Firepro range of fire protection products, Rockwool Firestop Compound is used to provide a fire resisting seal around service penetrations in fire rated walls and floors. Provides up to 6...
Rockwool Acoustic Intumescent Sealant
High specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of Rockwool Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates. Up to 4 hours* fire protection Used to reinstate the fire resistance of wall and...
Rockwool 50mm Ablative Coated Batt
A high-density stone wool core, pre-coated on both sides with our high-performance ablative coating. Ablative Coated Batt has been comprehensively tested as part of the Rockwool Firepro range of fire protection products, specifically for use in service penetrations, head of wall and other void seals. Provides fire stopping solutions in...