- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Resin bound kits without the need for specialist equipment! These DIY Resin Bound Kits are perfect for smaller landscaping projects such as pathways and patios. Each kit contains a 25kg aggregate and a 2-part resin kit – ready to mix together and trowel apply.
No mixer needed - capable of mixing with a ‘drill and paddle’ in a drum or durable container, around 30 litres in capacity. These smaller kits are perfect for smaller projects and those looking to use resin bound for the first time.
- 15 year-warranty, low maintenance
- 12-15mm depth for pedestrian traffic
- Pre-catalysed, so there is no requirement for additional mixing or blending on site
- Tarmac and concrete base
- Blend of sizes, binding aggregates, quality resin binder
- UV-stable
- Note: orders of 4+ kits require delivery via pallet with increased shipping charges
Quick Links - Click To Jump To Section:
Order References
Ref | Colour | Kit Contents | Pack Size |
---|---|---|---|
RED-G-DIY-KIT | Red Granite |
1 x 25kg Red Granite 1 x 1.75kg DIY Resin Bound Binder |
1m² pack |
GUN-G-DIY-KIT | Gunmetal Grey |
1 x 25kg Gunmetal Grey 1 x 1.75kg DIY Resin Bound Binder |
1m² pack |
IR-BRO-DIY-KIT | Irish Bronze |
1 x 25kg Irish Bronze 1 x 1.75kg DIY Resin Bound Binder |
1m² pack |
RAV-B-DIY-KIT | Raven Black |
1 x 25kg Raven Black 1 x 1.75kg DIY Resin Bound Binder |
1m² pack |
EME-SIL-DIY-KIT | Emerald Silver |
1 x 25kg Emerald Silver 1 x 1.75kg DIY Resin Bound Binder |
1m² pack |
TYR-Q-DIY-KIT | Tyrian Quartz |
1 x 25kg Tyrian Quartz 1 x 1.75kg DIY Resin Bound Binder |
1m² pack |
Instructions
It is recommended to read the data sheet for full guidance.
Pour out the part A and the part B into a separate container and mix together until fully blended. A consistent creamy appearance indicates a fully mixed product.
Once mixed, add the aggregates and mix using a drill and paddle until all of the stones are fully coated. Whilst mixing, ensure that the paddle moves up and down to ensure all of the stones are coated in resin.
Pour the mixed screed onto your working surface and trowel into place. Each kit will cover 1m2 at 15mm thickness. Vuba recommends to mark out 1m2 sections using a spray gun prior to application.
Ensure that you do not lose your 'wet edge' by leaving a long period of time between mixes. The process should be continuous from start to finish.
Data sheet
- Pack Size
- 1m² pack
- Base Type
- Solvent-Based
- Suitable For Use On
- Pathways
- Product Usage Type
- Resin Bound
- Colour Family
- Stone
- Colour Family
- Cream
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Pink
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Gold
- Colour Family
- Silver
Questions
Question about the product
Phil on 2024-09-04 18:23:44 | Question:
Can the resin kit be laid onto a compacted layer of pea gravel? Many thanks |
Answer from Rawlins’ Technical Team:
Yes, however this is assuming there is a grid system with pea gravel laid and compacted between the grids. However, if it is just pea gravel only, we wouldn't recommend layering this product on to this type of base. | |
Nick on 2024-05-21 15:57:58 | Question:
Is this product able to coat a step riser |
Answer from Rawlins’ Technical Team:
Yes, this product can be used for coating step risers. We have e-mailed you directly with further details. | |
Tracy on 2024-02-20 06:28:19 | Question:
I have normal concrete flags at present can this be laid on top directly or should I lift them and then can it be laid on soil |
Answer from Rawlins’ Technical Team:
Unfortunately these cannot be applied to concrete flags or to a soil base. Please see the DIY Kit Data sheet for the required base build ups, this system can be applied over a suitable, sound tarmac or concrete surface. The DIY Kit Datasheet can be found in the data sheets tab on the product page. | |
Susan on 2022-12-12 07:01:02 | Question:
We have you resin bound product laid on our driveway. We suspect our solar panel installer dropped a scaffolding pole and broke a small area of our driveway. Can we use the diy kit to patch it ? Many thanks |
Answer from Rawlins’ Technical Team:
Unfortunately no this would not be suitable, the first concern is that a driveway mix would be made up of 4 different 25kg bags, so getting a single bag to match this is near on impossible. Batching could also be a problem, if it was say a single aggregate used. Please can you provide a picture of the driveway and the area of damage to [email protected] and we can look into this for you. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Vuba DIY Resin Bound Kits is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Vuba Aggregates
Washed and dried bags of aggregate, for use with Vuba kits and binder applications. 1-3mm and 1-4mm aggregates should only be used as part of the mixed blend of aggregates for the Pedestrian and Vehicle grade resin bound kits 2-4, 2-5, 2-6 and 4-6mm aggregates can be used as part of the Pedestrian and Vehicle blend kits but also...
Vuba Application Tools & Accessories
Tools and equipment for application of the Vuba range of resins, binders, and aggregates. Includes trowels, spazzle, and application sledge Note: Extra shipping charges apply at checkout to Spazzle, and Application Sledge due to size restrictions More Information Delivery Info
Vuba DIY Resin Bound Binder
1m2 Resin Bound Kit; for use with Vuba aggregates, and forming part of Vuba DIY Resin Bound Kits. Mix entire contents of Part A with contents of part B Total mixed weight: 1.75KG More Information Delivery Info