- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
When using Accelerex, you are speeding up the curing process of an already catalysed resin.
You would not use Accelerex with an un-catalysed resin because a large amount would be required to be added to each kit.
Vuba recommends to add Accelerex in doses of 4ml. The change will be dependent upon the amount of existing catalyst - see table.
Ambient Temp (℃) | Catalyst Addition / 7.5kg Kit (ml) | Addition of Accelerex per 4ml dose |
---|---|---|
0-5 | 14 | 11% |
6 to 7 | 13 | 13% |
8 to 9 | 12 | 14% |
10 to 11 | 11 | 14% |
12 to 13 | 10 | 15% |
14 to 15 | 9 | 16% |
16 to 17 | 8 | 18% |
18 to 19 | 7 | 19% |
20 to 21 | 6 | 21% |
22 to 23 | 5 | 22% |
24 to 25 | 4 | 25% |
26 to 27 | 3 | 33% |
28 | 2 | 40% |
General Guidance:
It is recommended to begin the project with less Accelerex addition than anticipated, and observe the curing profile. In general, contractors should gain experience before use of Accelerex. If not familiar with resin surfacing, we would recommend to simply avoid laying resin bound in low temperatures or when there is a risk of rain or frost before the resin system has had the opportunity to reach its gel time.
Data sheet
- For Use By
- Consumer Use
- Single, Two or Three Pack
- Single
- Categorised As
- Accessories > Accelerators
- Categorised As
- Additives > Low Temperature
- Seasonal
- Cold Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Vuba Resin Bound Accelerex is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Vuba Aggregates
Washed and dried bags of aggregate, for use with Vuba kits and binder applications. 1-3mm and 1-4mm aggregates should only be used as part of the mixed blend of aggregates for the Pedestrian and Vehicle grade resin bound kits 2-4, 2-5, 2-6 and 4-6mm aggregates can be used as part of the Pedestrian and Vehicle blend kits but also...
Vuba Application Tools & Accessories
Tools and equipment for application of the Vuba range of resins, binders, and aggregates. Includes trowels, spazzle, and application sledge Note: Extra shipping charges apply at checkout to Spazzle, and Application Sledge due to size restrictions More Information Delivery Info
Vuba Trade Resin Bound Binder
An aliphatic two component polyurethane stone encapsulation binder, for use on driveways, pathways and other landscaping surfaces. For use with Vuba Aggregates and Binding Quartz NEW Moisture Tolerant Version is available HERE and included in our NEW AND IMPROVED Resin Bound Kits: Vuba Trade (Pedestrian Grade) Resin Bound Kits Vuba...
Vuba Resin Bound Accelerex
It is possible to speed up the curing process of Pre- Catalysed Resin using the Vuba Accelerex additive. A highly catalysed polyurethane resin (Part A) Diluted in resin to enable the addition of small amounts of catalyst without risk of over catalysing the resin More Information Delivery Info