- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Jotun Penguard HSP ZP is a two component polyamide cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. To be used as a primer in atmospheric environments and is suitable for properly prepared carbon steel substrates.
Jotun Penguard HSP ZP is a two component polyamide cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. To be used as a primer in atmospheric environments and is suitable for properly prepared carbon steel substrates.
Jotun Penguard HSP ZP is suitable for structural steel and piping to be exposed to corrosive environments. Recommended for power plants, airports, buildings, refineries and mining equipment. Designed as a primer for Jotun's Steelmaster intumescent thin film passive fire protection coatings.
Approvals and certificates
- Tested and approved as primer for Jotun Steelmaster thin film intumescent coatings.
- Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 System M20, M21, N2 and N4 (Cert. No's. XM92/M20-166, XM92/M21-167, N1-115, XN90/N2-089, XN90/N4-090) Item 7.1.4.
Additional certificates and approvals may be available on request.
Data sheet
- Manufacturer
- Jotun
- For Use By
- Industrial Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Steel, Shop Primed Steel
- Application Method
- Airless Spray, Brush
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20L
- Application
- Brush, Spray
- Coverage
- 3 to 12m² per litre
- Touch Dry
- 1 hour
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN3470
- Base Type
- Solvent-Based
- Base Type
- Epoxy
- Suitable For Use On
- Steel
- Suitable For Use On
- Carbon Steel
- Suitable For Use On
- Compatible Existing Coatings
- Suitable For Use On
- Shop Primer
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Usages
- High Build
- Usages
- Atmospheric
- Usages
- Zinc Phosphate
- Usages
- High Solids
- Product Usage Type
- Primer
- Product Range
- Penguard
- Colour Family
- Grey
- Colour Family
- Red
- Dry to Recoat (@ 20-25°C)
- 2 hours
Questions
Question about the product
ultrablast uk ltd on 2017-08-24 12:02:03 | Question:
what is the average coverage per litre of this product on newly blasted steel |
Answer from Rawlins’ Technical Team:
It depends on the Dry Film Thickness required, it range from 3m² per litre up to 12m²per litre. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Penguard HSP ZP is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT