Follow us on:

Mapei Planitop HDM Maxi | Fibre-Reinforced Mortar
Mapei Planitop HDM Maxi | Fibre-Reinforced Mortar

Mapei Planitop HDM Maxi

203925+204005
MAP9918

Two-component ready-mixed high ductility pozzolan-reaction fibre-reinforced mortar for structural “reinforced” reinforcement when used in combination with mesh from the Mapegrid range and for smoothing and levelling concrete and masonry. Application examples include:

  • Cladding facing walls, vaulted ceilings and masonry in general after patching them up
  • Used in combination with mesh from the Mapegrid range to increase the shear/tensile strength of bay walls for structures in seismic zones and for structural consolidation
  • Used in combination with mesh from the Mapegrid range to structurally strengthen the internal and external face of arched and vaulted masonry elements
  • Levelling and repairing reinforced concrete structures
  • For professional use only.

Colour
Size
£60.96(incl. VAT)
£50.80(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Planitop HDM Maxi is used in combination with Mapegrid G 120 and Mapegrid G 220 primed alkali-resistant A.R. glass fibre mesh or Mapegrid B 250 primed alkali-resistant basalt fibre mesh to structurally “reinforce” stone, brick, tuff and mixed masonry structures.

The system complies with the approach defined by the guidelines for the approval of FRCM (Fibre Reinforced Cementitious Matrix) systems.

Planitop HDM Maxi may be also be used on its own to restore the texture of masonry or to level and even out the surface of reinforced concrete and masonry.

Moreover, Planitop HDM Maxi is part of Mapetherm Tile System, for installing tiles and slabs on external wall insulation systems for façades.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Two-component, high-strength cement-based mortar with glass fibres, selected aggregates in a granulometric curve, special admixtures and synthetic polymers in water dispersion
  • When the two components are mixed together (component A powder and component B liquid) they form a plastic-thixotropic mix which may be applied by trowel or spray in layers up to 25 mm thick on horizontal and vertical surfaces
  • High adhesion strength and when hardened forms a compact layer that is impermeable to water and aggressive gases present in the atmosphere while remaining permeable to water vapour
  • Meets the requirements of EN 1504-9 (“Products and systems for protecting and repairing concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use of products and systems”) and the minimum requirements of EN 1504-3 (“Structural and non-structural repairs”) for R2- class mortars
  • Planitop HDM Maxi is classified as M25 masonry mortar according to EN 998-2 and as GP render, category CS IV according to EN 998-1.



Recommendations & Limitations


  • Do not apply Planitop HDM Maxi if the temperature is lower than 5°C
  • Do not add cement, aggregates or other admixtures to Planitop HDM Maxi
  • Use Planitop HDM for layers less than 6 mm thick
  • No particular precautions need to be taken if the temperature is around 20°C
  • After application Planitop HDM Maxi must be very carefully cured if the weather is particularly dry, hot or windy and it is recommended protecting the surface to prevent the mixing water evaporating too quickly



Application & Preparation


Please refer to the data sheets in the tab above for further information.



Product Details
9918-971432

Data sheet

Manufacturer
Mapei
For Use By
Professional Use
For Use On
Ceilings
Walls
Concrete
Masonry
Stone
Brick
Reinforced Concrete
Single, Two or Three Pack
Two-Pack
Pack Size
31.25KG
Maximum Applied Thickness
25mm
Mixing Ratio
25 kg of Planitop HDM Maxi component A with 6.25 kg of Planitop HDM Maxi component B and 0.5 kg of water
Coverage
1.85 kg/m² per mm of thickness.
Max. Application Temperature
35°C
Min. Application Temperature
5°C
Pot Life
approx. 1 hour
Suitable For Use On
Masonry
Suitable For Use On
Concrete
Suitable For Use On
Brick
Suitable For Use On
Stone
Suitable For Use On
Walls
Suitable For Use On
Reinforced Concrete
Suitable For Use On
Ceilings
Manufacturer
Mapei
Usages
Fibre-Reinforced
Usages
High-Ductility
Product Usage Type
Mortar
Product Range
Planitop
Colour Family
Grey
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Mapei Planitop HDM Maxi is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT