- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Jotun Penguard Express is a two component amine cured epoxy coating that is fast drying, high solids and high build. It is specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments.
Description
Jotun Penguard Express is a two component amine cured epoxy coating that is fast drying, high solids and high build. It is specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. Suitable for properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero surface temperatures.
Jotun Penguard Express is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.
Approvals and certificates
- Pre-qualification testing in acordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120°C.
- Tested in acordance with ISO 12944-5, C5-High environment
- Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 System M20, N1 and N4 (Cert. No. XM92/M20-140, M20-179, XN90/N4-077, N4-102, XN90/N1-075) 7.2.2.
Additional certificates and approvals may be available on request.
Features & Benefits
- Fast dry-to-handle
- Fast dry-to-recoat
- All year around application, down to -5°C
- Designed for protection in corrosive atmospheric environments
- High solids
Fast drying properties
- Very fast recoat schedules
- Apply a complete paint system in one working day
- Fast handling of painted structures
- For application down to -5°C
High solids
- Good spreading rate
- Low VOC
Product Details
993-987219
Data sheet
- Manufacturer
- Jotun
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Steel, Galvanised Steel, Shop Primed Steel, Concrete
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Product Certifications
- NORSOK M-501, Rev. 5, System 1, ISO 12944-5
- Pack Size
- 20L
- Coverage
- 3 to 9.9m²/l
- Min. Application Temperature
- (-5°C)
- Touch Dry
- 1 hour
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Base Type
- Epoxy
- Base Type
- Solvent-Based
- Suitable For Use On
- Coated Surfaces
- Suitable For Use On
- Steel
- Suitable For Use On
- Shop Primed Steel
- Suitable For Use On
- Concrete
- Suitable For Use On
- Carbon Steel
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- High Solids
- Usages
- Low Temperature
- Usages
- High Build
- Product Usage Type
- Primer & Topcoat
- Product Range
- Penguard
- Colour Family
- Red
- Colour Family
- Black
- Colour Family
- Grey
- Colour Family
- Off-White
- Colour Family
- Buff
- Dry to Recoat (@ 20-25°C)
- 2 hours
- Categorised As
- Metal Paints > Low Temperature Primers
- Seasonal
- Cold Weather
- Industry Approved System
- Norsok
- Industry Approved System
- Network Rail
- Industry Approved System
- ISO 12944
 Paul Hadley on 2024-05-17 19:10:16 | Question:
I've used Penguard HB on my wooden/epoxy boat 17 years ago and its in great condition. Will this product give a similar lifetime? |
Answer from Rawlins’ Technical Team:
No, assuming you are looking to apply this product on to the wooden boat, this product isn't recommended for application wood or GRP. Jotun Penguard HB could be considered for this type of application, but we can't offer any assurances on the durability when applied to wood or GRP. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Penguard Express is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Jotun Penguard Express ZP
A two component amine cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments.
Price
£259.84
(incl. VAT)
In Stock and Available for Delivery
Jotun Penguard Express MIO
Jotun Penguard Express MIO is a two component amine cured epoxy coating that is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in...
Price
£248.96
(incl. VAT)
In Stock and Available for Delivery
Jotun Thinner No. 17
Jotun Thinner No. 17 is a paint thinner designed to improve the flow of a range of Jotun epoxy products. It can also be used as cleaner of pumps and tools after and before painting. Jotun Thinner No. 17 is specially suitable as a thinner for epoxies and similar type products except Tankguard series.
Price
£28.09
(incl. VAT)
In Stock and Available for Delivery
Jotun Penguard Express CF
Jotun Penguard Express CF is a two component polyamide cured, colour stable epoxy primer/finish coating that is fast drying, high solids and high build. It can be used as primer, mid coat or finish coat in atmospheric environments and is specially designed for new construction where fast dry to handle and over coating times are required....
Price
£272.90
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery