- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
An elastomeric plaster for the hygiene of walls, in internal and external applications. Fibre-reinforced, rustic effect coating for all new, old or painted surfaces, surfaces with hairline cracks, or surfaces in areas where particular local climatic conditions facilitate the growth of algae and mould. Application examples include:
- Decorating and protecting all types of cementitious and lime-based render
- Decorating façades with hairline cracks, including façades with old paintwork (check suitability beforehand)
- Decorating façades damaged by mould and algae, including façades with old paintwork (check beforehand)
- Protective coating for north-facing façades or at risk of being damaged by mould and algae
- Finishing coat for façades with external thermal insulation such as Mapetherm System
- For professional use only
Product customisation
Don't forget to save your customization to be able to add to cartElastocolor Tonachino Plus is a fibre-reinforced elastomeric coating which, thanks to its high elasticity, including at low temperatures, has the capacity to follow and absorb small deformations in substrates. Also, the fibres contained in the product form an interwoven strengthening matrix, similar to “non-woven” fabric, with the capacity to withstand deformations in the coating and to hide any hairline cracks in the finishing layer.
Elastocolor Tonachino Plus also contains silicone resins, which give substrates high water repellence combined with good vapour permeability. The combined action of the silicone and elastomeric acrylic polymers form a film with exceptional adhesion, strength, protection, durability and colour stability and very low dirt pick-up.
Elastocolor Tonachino Plus is resistant to the growth of mould and algae, and may be used for decorating buildings located in particularly damp climates favourable to the growth of such micro-organisms. A typical example is when painting a north-facing façades.
Elastocolor Tonachino Plus adheres perfectly to all types of traditional render and to old, well-adhered paintwork. The water repellence of the product protects substrates from chemical attack, makes them much less susceptible to dirt retention and provides them with excellent resistance to UV rays and ageing, characteristics which remain stable for a very long time.
Apart from protecting substrates, Elastocolor Tonachino Plus forms an attractive, rustic finish. It is available in a wide range of colours obtained using the ColorMap® automatic tinting system.
Quick Links - Click To Jump To Section:
Features & Benefits
- Fibre-reinforced elastomeric coating
- High elasticity, including at low temperatures
- Follows and absorbs small deformations in substrates
- Fibres contained in the product form an interwoven strengthening matrix, similar to “non-woven” fabric, with the capacity to withstand deformations in the coating and to hide any hairline cracks in the finishing layer
- Contains silicone resins, which give substrates high water repellence combined with good vapour permeability
- Combined action of the silicone and elastomeric acrylic polymers form a film with exceptional adhesion, strength, protection, durability and colour stability and very low dirt pick-up
- Resistant to the growth of mould and algae, and may be used for decorating buildings located in particularly damp climates favourable to the growth of such micro-organisms
- A typical example is when painting a north-facing façades
- Contains a specific additive for the control of mould and algae growth.
- Eliminates all the causes which provoke deterioration of façades, and forms a long-lasting, protective coating which remains stable over the years
- Adheres perfectly to all types of traditional render and to old, well-adhered paintwork. The water repellence of the product protects substrates from chemical attack, makes them much less susceptible to dirt retention and provides them with excellent resistance to UV rays and ageing, characteristics which remain stable for a very long time
- Meets the main requirements of EN 1504-9 (“Products and systems for protecting and repairing concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use and application of systems”), and the requirements of EN 1504- 2 (“Protection system for concrete surfaces”) for class: products for protecting surfaces - coating (coating, C) - control of humidity (2.2) (moisture control, MC), and increase in resistivity (8.2) (increasing resistivity, IR) (ZA. 1e)
- Complies with the requirements of EN 15824 (“Specifications for external renders and internal plasters based on organic binders”) for internal and external applications
Recommendations & Limitations
- Do not apply Elastocolor Tonachino Plus directly on surfaces where mould or algae are present. Such micro-organisms must always be removed from surfaces beforehand with Silancolor Cleaner Plus followed by the application of a coat of Silancolor Primer Plus or Silancolor Base Coat Plus
- Do not apply Elastocolor Tonachino Plus on damp substrates or on substrates which are not completely cured
- Do not apply Elastocolor Tonachino Plus if the temperature is lower than 5°C or higher than 35°C
- Do not apply Elastocolor Tonachino Plus if the level of humidity is higher than 85%
- Do not apply Elastocolor Tonachino Plus if it is about to rain, in windy weather or if there is direct sunlight
- Do not apply Elastocolor Tonachino Plus on de-humidifying render
- Refer to the “Safety instructions for preparation and application” section in the data sheet
Application & Preparation
Please refer to the data sheets for further information.
Data sheet
- Manufacturer
- Mapei
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Walls
Render
Facades
Cementitious Substrates - Application Method
- Brush
Spray - Sheen
- Smooth
- Single, Two or Three Pack
- Single
- Pack Size
- 20KG
- Coverage
- 1.9-2.3 kg/m²
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 5°C
- UN Number
- N/A
- Dry to Recoat
- 12-24 hours
- Base Type
- Water-Based
- Suitable For Use On
- Walls
- Suitable For Use On
- Façades
- Suitable For Use On
- Cement
- Finish
- Smooth
- Application Method
- Spray
- Manufacturer
- Mapei
- Product Usage Type
- Plaster
- Product Range
- Elastocolor
- Colour Family
- Neutral
- Colour Family
- Pink
- Colour Family
- Cream
- Colour Family
- Purple
- Colour Family
- Grey
- Colour Family
- Off-White
- Colour Family
- Blue
- Colour Family
- White
- Colour Family
- Brown
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Orange
- Colour Family
- Beige
- Colour Family
- Yellow
- Colour Family
- Green
- Colour Family
- Black
- Colour Family
- Red
- Categorised As
- Anti-Mould Paints
- Seasonal
- Cold Weather
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Mapei Elastocolor Tonachino Plus is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT