Follow us on:

Mapei Mapefix PE Wall | Chemical Anchor for Masonry and Light Loads
Mapei Mapefix PE Wall | Chemical Anchor for Masonry and Light Loads

Mapei Mapefix PE Wall

1960742
MAP9973

An adhesive for chemically anchoring metal bars in holes made in brick, stone and mixed masonry. It is a two-component, styrene-free product made from polyester resins. Specifically formulated for anchoring steel and zinc- plated stainless steel threaded elements which transmit light loads to solid, semi-solid and perforated masonry. It is also an ideal solution for anchoring close to edges or when there is a limited pitch between each anchor, in that no stress is generated as with conventional mechanical expansion fasteners.

Recommended for anchoring elements in internal and external substrates with a horizontal, vertical, inclined or overhead axis, and is particularly recommended for anchors in perforated substrates or substrates subject to light stress. Recommended for anchoring elements in place, such as:

  • Plant equipment, Sanitary fittings
  • Aerials, Signs, Window and door fittings
  • For professional use only

Price on application - contact our sales team on 0113 2455450 or send a message to [email protected]

Colour
Size
Quantity
Product not available
This Product is Price on Application Only

No queries yet, leave the first!
Description

A two-component chemical anchoring product supplied in 400ml cartridges with two separate compartments containing component A (resin) and component B (catalyser) at the correct mixing ratio by volume. The two components are mixed together when they are extruded via the static mixer supplied with the cartridge. The mixer is screwed to the end of the cartridge, and no preliminary mixing of the two components is required.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Does not contain styrene which makes it suitable for use in areas with poor ventilation
  • Made from styrene-free resins, suitable for application on solid and perforated building materials, such as:
    • Masonry
    • Bricks
    • Stone
  • May only be used in concrete if there is no capillary rising damp
  • Applied in holes made with a drill or hammer drill. Mapei recommend using the drill feature only on perforated substrates
  • Certified according to European Standard ETAG 029 (anchors in solid, semi-solid and perforated masonry)
  • 400 ml cartridges need to be used with a special extrusion gun for 60mm diameter cartridges



Recommendations & Limitations


  • Do not apply on dusty or crumbly surfaces
  • Do not apply on wet substrates or substrates with continuous capillary rising damp; in such cases, use Mapefix VE SF or Mapefix EP. The product may also be used on substrates which are temporarily damp
  • Do not use on surfaces with traces of oil, grease and stripping compound, otherwise the bond may be compromised
  • Do not apply if the temperature is lower than 0°C
  • When used on natural stone, check beforehand that it does not cause staining to the stone
  • Do not apply loads until it has completely hardened (T) (see table 1 in data sheet)
  • Do not use the product in holes made with a diamond-tipped bit (cored holes)
  • Do not use for anchors in tension zones: in these cases, use Mapefix EP.
  • Only use the product on the substrates recommended in this technical data sheet; for other substrates use Mapefix PE SF, Mapefix VE SF or Mapefix EP
  • The mechanical characteristics are not certified for use in concrete, in that the European standard only considers masonry substrates. To obtain certified mechanical characteristics in concrete, use Mapefix PE SF, Mapefix VE SF or Mapefix EP



Application & Preparation


Please refer to the data sheets in the tab above for further information.



Product Details
9973-971734

Data sheet

Manufacturer
Mapei
For Use By
Professional Use
For Use On
Stone
For Use On
Brick
For Use On
Masonry
Single, Two or Three Pack
Single
Pack Size
330ml
380ml
Coverage
According to the size of hole to be filled
Max. Application Temperature
30°C
Min. Application Temperature
0°C
Suitable For Use On
Masonry
Suitable For Use On
Brick
Suitable For Use On
Stone
Manufacturer
Mapei
Product Usage Type
Adhesive
Product Range
Mapefix
Colour Family
Grey
Categorised As
Repairs > Low Temperature Bonding and Adhesives
Seasonal
Cold Weather
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Mapei Mapefix PE Wall is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT