Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Recommendations
• Application
• Cleaning
• Storage & Safety Instructions

Features & Benefits

   
• For professional use
• Eco Prim T Plus is a solvent free, low odour, easily applied acrylic resin-based primer in water dispersion
• It has excellent bonding, water and ageing resistant characteristics
• Easily applied, ready to use light blue coloured liquid, applied by brush or roller
• Not flammable and shows a very low emission of volatile organic compounds (EMICODE EC1 Plus) so it is absolutely harmless to the health of the installer and the end-user
• Can be stored with no particular precautions
• Consumption varies from 0.10 to 0.20 kg/m², depending on the porosity of the substrate and on how it is applied
• EMICODE: EC1 Plus - very low emission
• Blauer Engel: DE-UZ 113
   

Recommendations

• Apply Eco Prim T Plus only on internal flooring
• Apply Eco Prim T Plus only on moisture-stable wood
• Do not apply Eco Prim T Plus on substrates subject to rising damp

Application

Preparation of the Substrate:

• Substrates must be uniformly dry, sound, free of dust, loose particles, cracks, paint, wax, oil, rust, traces of gypsum or other products that can interfere with bonding
• It is essential to make sure there is no rising damp present
• All subfloors must contain an effective membrane to prevent rising damp

Applying the Primer:

• Eco Prim T Plus can be applied with a brush or roller
• It is usually diluted 1 : 2 with water when applying on cementitious or anhydrite substrates
• It is used undiluted on existing ceramic tile, natural stone, wood and adhesive residues (as long as they are water resistant)
• When the primer is completely dry, it is possible to apply a smoothing compound or mortar
• Drying time varies with the absorbency of the substrate and environmental conditions (temperature and humidity), however, it is recommended not to wait more than 24 hours
• If the product is used as a bonding aid for cementitious smoothing compounds on substrates consolidated or waterproofed with Mapeproof ESM, Mapeproof One Coat or Mapeproof 1K Turbo, Eco Prim T Plus must be applied neat at least 2 hours and no more than 24 hours after applying one of the above membranes

Drying time before applying the smoothing compound or adhesive:

• Absorbent substrates (screed, concrete): 0 min
• Low or non-absorbent substrates (ceramc, epoxy resins): 30 - 60 mins
• Gypsum-based substrates:
  • For application of cementitious smoothing compounds: 30 - 60 mins
  • For application of gypsum smoothing compounds: 0 mins

Cleaning

• While still wet, Eco Prim T Plus can be cleaned from floors or wall coverings, tools, hands and clothing with water
• When dry, use alcohol or suitable solvent cleaner

Storage & Safety Instructions

• Under normal conditions Eco Prim T Plus is stable for at least 12 months in its original sealed packaging
• Avoid prolonged exposure to frost
• Instructions for the safe use of the product can be found on the latest version of the Safety Data Sheet (see 'Data Sheets' section above)
• Keep out of the reach of children
• Ensure good ventilation during and after use and drying
• Do not eat, drink or smoke when using this product
• In case of contact with skin or eyes, rinse immediately with plenty of water
• Do not allow product to reach sewage system, water course or soil
• Clean tools with soap and water immediately after use
• Give only empty containers to recycling
• Dried product residues may be disposed of as domestic waste if allowed by local regulations
• Product contains: BIT and CIT/MIT (3:1)
• The product contains: water, binder, additive, pigment, preservatives (Vdl-RL 01/June 2018)