- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Protecta Products
Protecta FR Board
Designed to prevent the spread of fire and smoke through openings in fire rated walls and floors with multiple installed building services. Permanently flexible, it will maintain the acoustic design performance in fire rated walls and floors, accommodating movements during fire and smaller movements in the construction it has been fitted...
Protecta FR Acrylic 4hr Intumescent Sealant
Designed to prevent the spread of fire and smoke through joints and openings in fire rated walls and floors including around building service penetrations. Classified for fire sealing all types of constructions such as drywalls, masonry walls, concrete walls, concrete & composite floors For fire stopping of service penetrations in...
Protecta FR Damper
Fire proofs ventilation ducts that pass through fire-rated walls & floors, preventing spread of fire & smoke both surrounding & inside ducts. The steel casing contains horizontal steel blades treated with a technically advanced heat expanding graphite, closing off the damper in fire. Closes in the area where the fire is located...
Protecta Steel Paint FR-1
Single component acrylic paint used for up to 60 minutes fire protection of loadbearing structural steel that normally requires no top coat, is easy to use and very easy to clean up. Fire resistance approval - tested according to BS-EN 13381-8:2013 Available in 28 fire tested decorative shades, including white Non-toxic, emission free...
Protecta FR Pipe Collars
Maintain the fire resistance of fire rated walls and floors, where breached by service penetrations, for up to 240 minutes. High end fast expanding patented graphite material Classified for fire sealing all types of constructions - drywalls, masonry & concrete walls, concrete & composite floors, & solid or cross-laminated...
Protecta FR Putty
Fire protection putty pads (also known as firestopping gaskets) for reinstating fire ratings in electrical sockets, services and water supply boxes. Supplied as a non-setting putty with a low pressure intumescent for optimal fire protection. The putty is hand workable and easy to apply, re-useable and re-serviceable due to its non-setting...
Protecta EX Mortar Fire Rated Compound
A highly thermally-insulating fire sealing compound to prevent the spread of fire and smoke through openings in fire rated walls and floors. Use to seal up gaps around services such as cables, bundled cables, cable racks, cable trays, steel, copper, alupex, plastic pipes and air ventilation ducts on concrete, bricks, Leca, steel & plastic....
Protecta Interior Paint FR-1
Hardwearing interior decorative acrylic paint in 28 colours for most surfaces, including concrete, bricks, masonry, primed steel, wood, gypsum and most non-porous surfaces. Special properties protect against spread of fire. One-layer system normally requires no primer and no top coat. Easy to use and very easy to clean up. Smooth and...
Protecta FR Graphite 4hr Intumescent Sealant
High specification formulation designed to prevent the spread of fire, smoke & gases through openings in fire rated walls & floors. The sealant expands when it is subjected to fire & closes openings around penetrations when combustible or low temperature melting materials have burnt away, sealing difficult services which...
Protecta FR Coating
An ablative sealant coating applied by sprayer directly on to mineral fibres to enhance, seal and protect from fire by resisting flame spread, fire penetration & passage of hot gasses. Coated mineral fibres help prevent the spread of fire & smoke through openings in fire rated walls & floors, suitable for most surfaces including...
Protecta FR Pipe Wrap
Maintain fire resistance of fire-separating drywalls, masonry or concrete walls and concrete floors up to 240 minutes when these are breached by services such as plastic pipes, conduits or metal pipes with continuous combustible insulation. Intumescent wraps simply fit around services, reacting in heat and expanding to fill softened pipes...
Protecta FR ASF 4hr Intumescent Sealant
Designed to prevent the spread of fire, smoke and gases through openings in fire rated walls and floors, specifically linear joints and openings for building service penetrations. The 4-hour rated anti-fire sealant is formulated with fillers that provide noise reduction, creating a robust fire seal by the formation of a durable intumescent...
Protecta FR Adhesive
Contains a water based inorganic polymer and filler, and is designed to withstand temperatures greater than 1,200 °C. It is supplied as a ready to use thixotropic paste which exhibits excellent early grab and rapid bond strength. After curing the product forms a cement with a permanent bond giving excellent adhesion in service. Protecta FR...
Protecta Service Coating FR-1
Water-based intumescent coating for the fire protection of cables in a service installation. The coating upgrades the insulation and integrity of the installation and is non-toxic, emission free, durable and can be applied in one coat saving time and money. Can be used in combination with Protecta FR Board as a coatback on services to...
Protecta FR IPT 4hr One Part Sealant & Adhesive
High performance, professional quality, one-part ready-to-use sealant and adhesive with up to 4 hours fire protection - offering tradesman one solution for all internal building applications. Suitable for a wide variety of internal building trade applications including decorating, sealing, joinery, plumbing and tiling Out-performs...
Protecta FR Service Transit
Intumescent pipe and cable sleeves that help maintain fire resistance of walls & floors breached by continuous cables, conduits and plastic pipes, providing fire protection integrity and insulation for up to 240 minutes. Safe, easy & quick to fire stop service penetrations - ideal for retrofitting or installing in tight spaces For...
Protecta Mineral Fibre Bio Backing Material
Made from special alkaline earth silicate (AES) fibres that have been uniquely engineered to offer advantages in high temperature and insulation applications, with low thermal conductivity and heat storage and excellent resistance to thermal shock. Considered a superior alternative to stonewool (rockwool) for its high temperature endurance and...
Protecta Waterproofer
Protecta Waterproofer, a high viscosity cream-like impregnating fluid (based on alkyl-alkoxy-silanes) that, when applied to cured Protecta EX Mortar, the Waterproofer protects the surface by making it water repellent. Protects other porous substrates such as stone, brickwork, concrete and plaster in facades Provides a comprehensive...
Protecta FR Foam
This product is temporarily unavailable; in the meantime, our technical team recommend Nullifire FF197 Gun Grade Fire Rated PU Foam as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any...
Protecta FR Graphite Plate
Preformed self-adhesive intumescent plates to reinstate the fire resistance performance of flexible wall constructions for up to 120 minutes when punctured with plastic wall boxes. Used where walls have been provided with apertures for the penetration of conduits and cables into socket boxes, on one or both sides of the wall. 2022...
Need Help?
Need Help?
Protecta have specialised in manufacturing evidence-based, high-performance fire protection products and systems you can trust to perform well, since 1993, providing quality systems which meet the harshest requirements of today’s building and construction projects.
Their comprehensive range of passive fire protection products lead the industry, with on-going development and test programmes in co-operation with major laboratories including UL, EXOVA, SP and BRE ensuring Protecta products are of the highest standards. All Protecta products and comprehensive range of applications are CE marked, and core products each have ETAs (European Technical Assessment).
The purpose of passive fire protection is to contain the spread of fire for sufficient time to permit the safe evacuation of all occupants of the premises and the arrival of the fire services. Protecta has a full range of fire-resistant sealants and adhesives, compounds and boards, pipe collars and cable wraps and coatings that remain dormant, or inert, during normal conditions but become active in a fire situation. An integral component of structural fire protection in a building, designed to contain fires or slow their spread.
Protecta fire stopping products include:
- Heat and fire-resistant intumescent sealants and adhesives
- Fire resistant boards and backing materials
- Fire rated foams, putty and mortar compounds
- Intumescent fire collars and wraps for pipes and cables, conduits, etc
- Fire rated coatings
- Intumescent grilles for fire protection in air ventilation ducts
These passive fire protection products and systems are used to reinstate fire protection in walls and floors where they are penetrated by services such as pipes and cables, fitting around them and expanding when attacked by fire to ensure gaps and holes are sealed shut.