- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Repair Mortars and Compounds
Repair mortars have a wealth of properties and features to suit almost all repair projects - contractors searching for complex repair solutions, large infrastructure restorations, areas with heavy footfall requiring ultra-fast turnarounds - on most substrates, including concrete, metal, wood, rubber, tarmac and asphalt, and vertical and overhead repairs. Click here for more info.
Rust-Oleum 5180 Epoxy Repair Mortar
Available in grey. Two-component epoxy repair mortar. For concrete and stone surfaces. Internal and external use. Provides high compressive, tensile, and flexural strength. Non-shrinking, durable, and chemical-resistant.
Fosroc Renderoc LA
Fosroc Renderoc LA is a high performance, free flowing, low alkali micro concrete specifically developed for the repair of large areas of concrete where access is restricted or where reinforcement is congested. Suitable for repair methods 3.2, 4.4, 7.1, 7.2 as defined by BS EN 1504-3. For the reinstatement of reinforced concrete where low...
201 Epoxy Repair Mortar
201 Epoxy Repair Mortar is a high strength, trowel applied, two component epoxy resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces. Pre-packed units – ready to use Fast curing Impact and abrasion resistant Frost resistant and impervious to water Negligible shrinkage Images are for illustrative...
Fosroc Paveroc
Fosroc Paveroc is a high performance reinstatement mortar for the reinstatement or resurfacing of large areas of concrete pavements, ramps and floors to avoid the full depth replacement of bays. May be used internally and externally including areas subject to heavy trafficking Suitable for repair methods 3.1, 3.2, 4.4, 7.1, 7.2 as defined...
Watco Asphalt Easy Fill
A flexible rubberised filler that seals cracks in asphalt, concrete, metal, stone, and brick, helping protect against damage caused by water ingress and erosion. Dries in 24 hours Fits a standard skeleton gun for quick clean repairs Remains flexible for years, moves with substrate (+/-5%) Note: While great care is taken with the...
Rust-Oleum 5190 Epoxy Repair Mortar Deep Fill
Available in grey. Two-component epoxy repair mortar for deep hole repairs. For concrete surfaces, internal and external. Does not shrink or crack, ensuring long-lasting repairs. All-in-one packaging. Professional use only.
Fosroc Renderoc HB
Fosroc Renderoc HB is a high build, polymer modified, cementitious repair mortar. Its lightweight nature and high build characteristics makes it ideal for vertical and overhead repair work, and suitable for repair methods 3.1, 3.3, 4.4, 7.1, 7.2 defined by BS EN 1504-3. Ideal for the reinstatement of concrete where low permeability...
Rust-Oleum 5410 Asphalt Repair
Black bitumen-based patch repair for durable, immediate pothole fixes. For use on asphalt and concrete surfaces including roads, car parks, and paths. Withstands heavy traffic immediately after application. No mix required.
202 Vertical Surface Repair Mortar
202 Vertical Surface Repair Mortar is a solvent-free fast setting epoxy repair mortar for vertical and overhead repairs. It provides a strong, durable, weatherproof repair for concrete, brickwork, stonework and steel substrates. Excellent adhesion to substrate Very good abrasion and impact resistance High build application in vertical and...
Watco Asphalt Crack Filler
A rubberised bitumen-based product that makes crack repairs on asphalt and tarmac easy, simply pouring into cracks up to 3mm from a spouted can. Ideal for use in car parks and on walkways, school playgrounds, and more. Quick to dry - approx. 2-4 hours for cracks up to 3mm Interior and exterior use Flexible to allow for expansion and...
Rust-Oleum Speed Patch Pourable Grade
Available in Grey. Quick-setting, pourable material for fast repairs on concrete surfaces. Suitable for deep or shallow repairs. Internal or external use. Accepts heavy traffic two hours after application.
Sika Parex LA Repair Concrete
Parex LA Repair Concrete is a blend of special Portland cements, ground granulated blast furnace slag plus high quality continuously graded non ASR reactive aggregates. The product, when mixed with water, produces a homogenous concrete which will not segregate or bleed and has a dual shrinkage compensating system giving volume stability in...
203 Deep Repair Mortar
203 Deep Fill Repair Mortar is a versatile, trowel applied, three component epoxy resin-based, deep section screed/mortar. Easy application Fast curing characteristics Economical Hard wearing and durable Taint free Frost resistant and impervious to water Negligible shrinkage even in thick section Images are for illustrative purposes...
Swarco Hitex Non-BBA Overbanding Tape
A preformed overband tape system for the permanent repair of open seams, joints or cracks. Used as a simple overband, it will repair defects up to 5mm wide. Overbanding tape is a long lasting, rapid solution for sealing surfaces following road repairs and utility works. Simple torch on application provides an overband seal No need for...
Rust-Oleum 5150 Speed Patch
Available in Grey. High-strength, rapid curing concrete repair mortar. For repairing damaged mineral and concrete surfaces such as steps, troughs, ramps, coving, and exposed reinforcing. Fast setting, high strength, non-shrinking and non-cracking properties. Recoatable within hours. Professional use only.
Sikadur 30
Sikadur 30 is a thixotropic, structural two part adhesive, based on a combination of epoxy resins and special filler, designed for use at normal temperatures between +8°C and +35°C for bonding Carbon Fibre & Steel reinforcement. Features and Benefits Easy to mix and apply No primer needed High creep resistance under permanent load...
Watco Flowpatch Deep Fill
Quick setting, pourable repairs for deep holes in heavily trafficked floors. Ideal for filling deep holes before screeding with Watco Flowtop. Fibre reinforced for added strength Forklift traffic in just 2 hours Just add water, mix, and pour Can be applied to damp (not wet) concrete Sets at low temperatures (down to 5°C) Apply at any...
Ronacrete RonaBond Flowable Micro Concrete
Prepacked flowable repair concrete for pumping or pouring, used for reinstatement of structural elements such as columns and beams. For when hand application of mortars is impractical or undesirable. Conforms to BS EN 1504-3 High strength flowable micro concrete - free flows in to shuttering and formwork Shrinkage compensated - protects...
Rust-Oleum Epoxyshield Concrete Repair Mortar
Available in grey. Powdered repair mortar for levelling and repairing concrete. Also for cement renderings and unpainted brickwork. Internal or external use. Recoatable after 48 hours, traffic allowed after 24 hours. Professional use only.
Coo-Var CSP Mortar
Grey two-component epoxy mortar, designed for crack and hole filling. For concrete and similar surfaces. Fast setting and easy to apply, ideal for repair work in commercial and industrial settings. Professional use only.
Sikadur 330
Sikadur 330 is a two part, thixotropic epoxy based impregnating resin / adhesive. Used as impregnation resin for SikaWrap fabric reinforcement for the dry application method, primer resin for the wet application system and structural adhesive for bonding Sika CarboDur plates into slits. Features and Benefits Easy mix and application by...
Watco Bitu-Mend Pothole Repair
An easy-to-use material for repairing pot-holes. For use on exterior potholed asphalt and concrete, ideal for potholes in roadways, vehicle parks, loading docks, paths, airfields etc, and on bituminous and concrete surfaces. Unique aggregate mix Use straight from the tub - primer included Less prone to crumbling High concentrate of...
Watco Bitu-Mend Pour And Restore
Pour on shallow surface repairs to damaged or cracked asphalt and tarmac such as shallow depressions, dished or pitted asphalt surfaces in car parks, yards, and pavements. Use between 6-20mm deep Self-smoothing epoxy formula Slip resistant surface Easy to mix and apply Good general resistance to many common chemicals such as diesel,...
Sikadur 12 Pronto
Sikadur 12 Pronto is a fast curing, self smoothing two part resin mortar based on reactive acrylic resins. It is a fast curing multi purpose repair mortar for: concrete roadways, runways, car park decks, industrial floors, stairs, precast concrete units etc. Can also be used as a grout for bridge bearings, foundations and rails, anchors and...
710 MMA Repair Mortar
710 MMA Repair Mortar is a fast curing, high strength, trowel applied, three component methacrylate resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces. Resilient Very good chemical resistance Excellent adhesion Fast curing, even at low temperatures (down to -10°C*) Impact and abrasion resistant...
Fosroc Renderoc FC
Fosroc Renderoc FC is a single component polymer modified cementitious fairing coat designed for vertical and overhead use to infill honeycombing and voids up to 3 mm deep in the surface of concrete which is not trafficked and is subsequently coated. Exhibits excellent thermal compatibility with concrete and is fully compatible with other...
Mapei Adesilex PG1 Rapido
Two-component, ultra rapid-setting thixotropic epoxy adhesive for repairs, bonding and structural strengthening of concrete, reinforced concrete, natural stone, mortar and brickwork structures. Structural strengthening of beams and pillars by bonding steel plates (béton-plaqué technique) or composite material (such as Carboplate) to...
Mapei Adesilex PG1
Structural repair, bonding and reinforcement of concrete elements, natural stone, mortar and brick with very low emissions of volatile organic compounds (EMICODE EC1 Plus). Structural reinforcement of beams and pillars by bonding steel (béton plaqué method) or composite material (e.g. Carboplate) plates to concrete Non-flexible structural...
SikaWrap 930 G
SikaWrap 930 G is a woven unidirectional glass fibre fabric, designed for structural strengthening applications as part of the Sika strengthening system. Designed for installation using the wet application process and is used for structural strengthening of reinforced concrete, masonry, brickwork and timber elements or structures, to increase...
RSL FasTop Multi Bu
RSL FasTop Multi Bu (formerly known as Resufil) is a three component, granite reinforced polyurethane infill screed designed to fix holes or dents in a concrete subfloor, before overlaying occurs. It can also back-fill drainage waterways. Can be applied from 6mm to 60mm Can back-fill drainage channels Forms falls or ramps Fast curing...
SikaWrap 231 C
SikaWrap 231 C is a unidirectional woven carbon fibre fabric with high strength, designed for structural strengthening applications as part of the Sika strengthening system. Installed using the dry or wet application process. Features and Benefits Manufactured with weft fibres to keep the fabric stable (heat-set) Multifunctional fabric...
Sikadur 300
Sikadur 300 is a two part, epoxy based impregnating resin for SikaWrap fabric reinforcement for the wet application method and primer resin for the wet application system. Features and Benefits Easy mix and application by trowel and impregnation roller Manufactured for manual or mechanical saturation methods Good adhesion to many...
Watco Concrex Asphalt Repair
A heavy duty epoxy resin repair system for ultra-strong repairs to damaged concrete and asphalt. Repair trip hazards and potholes, gangways and work areas Car parks and loading bays, bed in and fix roller shutter door guide rails, etc Takes heavy traffic Ideal for shallow repairs asphalt and tarmac Strong enough to hold guide posts and...
Need Help?
Need Help?
Buy Repair mortars at Rawlins Paints, mending and restoring structures, floors, trims and more in commercial and industrial environments.
If you require more help to find and specify a repair mortar for your project or contract, our technical team are always on hand to advise. Give us a call on 0113 2455450 (option 2) or send a message to [email protected].
Mapei Repair Mortars
Used on building sites day-in day-out around the UK, Mapei's professional repair mortars have a product for nearly all situations, projects and contracts, trusted on major infrastructure works that include:
- Birmingham New Street Railway Station
- Bank Station capacity upgrade project
- Heathrow Airport - Terminal 5
- Menai Suspension Bridge
Mapei Mapegrout SV
A fast-setting and hardening compensated-shrinkage, easy-flow mortar. It is ideal for use in areas that require a fast turnaround to be put back into service - busy streets, public areas, concourses - with its rapid drying times.
- Repairing:
- Concrete floorings for industrial use, shopping centres and warehouses
- Concrete floorings in airports
- Pedestrian concrete pavements
- Fixing:
- Road signs
- Concrete pylons for electricity lines or telephone lines
- Fencing
- General highway coating materials
- Drain covers and gas, electric and phone-line inspection shafts
- Anchoring kerbstones and protection barriers
Mapei Mapegrout Thixotropic
Shrinkage-compensated fibre-reinforced mortar for surface repair of deteriorated concrete structures on both vertical and horizontal surfaces.
- Repairing:
- Deteriorated areas of concrete, corners of pillars and beams, edges of balconies damaged by the oxidation of reinforcing steel
- Viaducts for highways, roads and railways
- Surfaces subjected to heavy abrasion (canals, industrial floors, ramps, etc.)
- Reconstruction of reinforcing rod covers in reinforced concrete structures
- Filling of rigid joints
- Smoothing:
- Surface defects, such as gravel nests, new casting joints, holes created by formwork spacers, exposed rods, etc
- Diaphragm walls and tunnels