- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Screeds
Prepare, repair and renovate floor screeds with our screed mortars from Instarmac, Mapei, Resimaac, RSL (Resin Surfaces Limited) and Sika. Click here for more info.
SikaScreed HardTop 60
SikaScreed HardTop 60 is a soft plastic consistency, polymer modified, fast curing, rapid load bearing and over-coatable, horizontal levelling mortar that is designed for application in a minimum layer thickness of 8mm. It is almost shrinkage-free during hardening and curing, plus it has very high abrasion resistance and compressive strength....
RSL Resuflor Screed
Resuflor Screed (formerly known as Resuscreed 45) is a heavy duty, epoxy resin floor screed which uses a crystalline silica free aggregate, making it more environmentally friendly. Must seal for an impervious finish. Less dust than other screeds Low odour Hard wearing Abrasion and impact resistant Can form coving and falls Can be...
Sikafloor 280
Sikafloor 280 is a three part epoxy mortar. Sikafloor 280 is a three part, solvent free epoxy mortar, consisting of an epoxy binder and quartz sand with a maximum grain size of 1.2 mm. Features and Benefits Very high abrasion resistance Very high impact resistance High compressive and flexural strength High bond strength Solvent...
Mapei Topcem Pronto
Mapei Topcem Pronto is a ready-to-use, normal setting, quick-drying mortar with high thermal conductivity. For forming unbonded and bonded screeds on new and existing slabs in interiors and exteriors prior to installing wood, PVC, linoleum, ceramic tile, natural stone, carpet or other floor coverings in areas where fast-drying screeds are...
Sikafloor 91
Sikafloor 91 is a coloured three component solvent free epoxy resin based mortar for patching and screeding industrial floors subject to heavy traffic. Ideal for warehouses, workshops, chemical plants, breweries, pharmaceutical plants and more. Features and Benefits Workshops high mechanical resistance High resistance to abrasion Good...
Ronacrete Ronafix Pre-Packed Underfloor Heating Screed 40mm+
Pre-packed polymer modified screed for thin section underfloor heating, ready to use mortar for laying floor screeds on underfloor heating systems. Open to foot traffic after 24 hours - heavy traffic 3-5 days- commisioning process after 7 days Conforms to BS EN 13813 40mm minimum thickness with 16mm diameter heating pipes Requires only...
Instarmac UltraCrete FTC (Fast Track Concrete)
Instarmac UltraCrete FTC (Fast Track Concrete) is a fibre modified concrete, suitable for small and large reinstatements to car parks, warehouses and bridge decks. Shrinkage compensated High compressive strength 66N/mm² Foot traffic: 2 hours Pre-blended, just add water More Information Delivery Info
Resimac Resichem 576 Quartz Screed
Resichem 576 Quartz Screed is an epoxy resin based solvent free high build trowel screed. The product has been designed to be applied to uneven concrete surfaces to a wet film thickness of 10-30mm (3/8”- 1 1/4”). On curing the product will ensure any imperfections on the surface of the concrete are reduced. Ideal for coating concrete floors,...
Resimac Resichem 577 Chem Screed
Resichem 577 Chem Screed is a chemical resistant epoxy resin based solvent free high build trowel screed. The product has been designed to be applied to uneven concrete surfaces subject to chemical attack from strong industrial chemicals. Ideal for rebuilding problematic cementitious surfaces in chemical process areas such as floors, plinths,...
Mapei Mapecem Pronto
Mapei Mapecem Pronto is a pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. For professional use only For use with screeds ready for foot traffic after 2-3 hours, and dry after 24 hours Screeds on which it is possible to lay ceramic tiles after 3-4 hours Screeds on which it is...
RSL FasTop Multi TR1000
A polyurethane cement screed applied ‘wet on wet’ to a primer with a screed bar which is power trowelled to create a compact heavy duty flooring base screed between 5 - 150mm thickness which can then be finished with a Resuflor epoxy resin or FasTop polyurethane cement topping. The material uses current FasTop multi component resin and...
Ronacrete RonaFloor Epoxy Floor Screed
Epoxy floor screed and floor repair mortar for heavy duty floor toppings. Extremely hard wearing in industrial applications Resistant to mechanical damage and chemical attack Slip resistant finish Minimum thickness 5mm Can receive full traffic after only 16 hours at 20°C 7 colours available Ronacrete RonaFloor Epoxy Floor Screed - For...
Ronacrete Ronafix Pre-Packed Screed 6-50mm
Supplied complete with all the correct dry components in a bag and a bottle of polymer gauging liquid, this pre-packed, two component, ready to use mortar is used for laying new screeds and toppings as thin as 6mm for light duty bonded and 35mm unbonded or floating applications. Ronacrete Ronafix Pre-Packed Screed 6-50mm conforms to BS EN...
Ronacrete Ronafix Pre-Packed Screed 25mm+
Supplied complete with all the correct dry components in a bag and a bottle of polymer gauging liquid, this pre-packed, two component, ready to use mortar is used for laying new screeds and toppings as thin as 25mm for light duty bonded and 35mm unbonded or floating applications. Ronacrete Ronafix Pre-Packed Screed 25mm+ conforms to BS EN...
Ronacrete Ronafix Pre-Packed Floating Screed 35mm+
Pre-packed polymer modified floating screed used to lay minimum 35mm floating screeds for residential applications. Factory packed for consistent high quality High early strength and fast drying allows earlier commissioning of heating systems Minimum screed thickness from 40mm with 16mm heating pipes Requires only 20mm cover over heating...
Ronacrete Ronafix Pre-Packed Wearing Screed 15mm+
Bonded and unbonded polymer modified granolithic screed and screed repair used to lay new granolithic screeds as thin as 15mm for heavy duty bonded application. Pre-packed formulation ensures consistent high quality Conforms to BS EN 13813 Contains granite aggregate for resistance to heavy wear Factory packed for consistent high quality...
Ronacrete Ronafix Pre-Packed Wearing Screed 25mm+
Bonded and unbonded polymer modified granolithic screed and screed repair used to lay new granolithic screeds as thin as 25mm for heavy duty bonded application. Conforms to BS EN 13813 Factory packed for consistent high quality Ready for foot traffic after 24 hours Rapid drying—ready for most floorings after 10 days @ 50mm thick...
Ronacrete RonaScreed Concrete
Rapid strength gain low temperature floor screed and repair mortar for laying floor screeds, repairing floor surfaces and rapid set bedding applications for bricks, blocks, kerbs and other compatible building components. Industrial, commercial and residential floors laid or repaired with RonaScreed Concrete can be fully trafficked as early...
Ronacrete RonaScreed Mortar
Rapid strength gain low temperature floor screed and repair mortar for laying floor screeds, repairing floor surfaces and rapid set bedding applications for bricks, blocks, kerbs and other compatible building components. Industrial, commercial and residential floors laid or repaired with RonaScreed Concrete can be fully trafficked as early...
Ronacrete RonaScreed 1 Day Overlay Rapid Drying Screed
Cement replacement system for rapid drying screeds, used when laying bonded, unbonded or floating screeds prior to covering with vinyl sheet or other coverings. Comforms to BS EN 13813 Apply from 25mm Open to foot traffic next day Lay most floorings after only 1 day at 75mm thickness plus After 36 hours less than at 75mm screed...
Need Help?
Need Help?
Commercial and industrial floors recieve heavy footfall and continuous traffic - supermarkets, hospitals, airports, etc - hence it is not only important for a screed to be hardwearing, but also curing quickly to return the area back into service. For industries and sectors where production can't afford to halt, departures and deadlines must be met, it is crucial to choose the correct screed.
Our screed filter helps you to narrow down suitable screed mortars for your project using properties and attributes:
- Base type
- Drying times/walk on hardness
- Internal and external use
- Self levelling compounds
- Layer thickness
- Suitable for flooring, painting, and for underfloor heating systems
- Single-pack, two-and-three component products
Screeds at Rawlins Paints are suitable for installing all kinds of floor coverings - wood, PVC, linoleum, ceramic tile, natural stone, carpet - in interior or exterior areas. Each screed has its own data sheets to download from the product page, detailing application and suitable substrates and coverings.
If you require more help to find and specify a screed for your project or contract, our technical team are always on hand to advise. Give us a call on 0113 2455450 (option 2) or send a message to [email protected].
Product Uses
Mapei Mapecem Pronto
Floating and bonded screeds on old and new floor slabs, for laying wood, PVC, linoleum, carpet, ceramic, natural stone and any other type of floor covering where quick drying is required for immediate laying of the floor covering.
SikaScreed HardTop 60
Used for minor and major repairs to heavily stressed, industrial concrete flooring or as a levelling mortar for Sikafloor resin-based flooring systems.
Mapei Topcem Pronto
For forming unbonded and bonded screeds on new and existing slabs in interiors and exteriors prior to installing wood, PVC, linoleum, ceramic tile, natural stone, carpet or other oor coverings in areas where fast-drying screeds are required in order to lay floorings in a short time.