- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 2 - Sealants, Adhesives, Foams and Coatings
FSi PS Coating
Ablative, highly advanced flexible coating used to apply to uncoated stonewool boards to reinstate the fire resistance performance of wall and floor constructions where apertures are penetrated by single or multiple services. Can be installed onto uncoated stone wool of a minimum thickness of 50mm and a minimum density of 140kg/m³...
Protecta FR Adhesive
Contains a water based inorganic polymer and filler, and is designed to withstand temperatures greater than 1,200 °C. It is supplied as a ready to use thixotropic paste which exhibits excellent early grab and rapid bond strength. After curing the product forms a cement with a permanent bond giving excellent adhesion in service. Protecta FR...
Protecta Service Coating FR-1
Water-based intumescent coating for the fire protection of cables in a service installation. The coating upgrades the insulation and integrity of the installation and is non-toxic, emission free, durable and can be applied in one coat saving time and money. Can be used in combination with Protecta FR Board as a coatback on services to...
SikaSeal-623 Fire Resistant Intumescent Sealant
A fire resistant, intumescent graphite based sealant for interior penetration seals, restoring the fire resistance performance of a floor or wall which incorporates combustible services like soil and vent pipes or cables. Designed to provide a high volume expansion and pressure seal during a fire to combustible pipes that pass through floor...
Protecta FR IPT 4hr One Part Sealant & Adhesive
High performance, professional quality, one-part ready-to-use sealant and adhesive with up to 4 hours fire protection - offering tradesman one solution for all internal building applications. Suitable for a wide variety of internal building trade applications including decorating, sealing, joinery, plumbing and tiling Out-performs...
Protecta FR Foam
This product is temporarily unavailable; in the meantime, our technical team recommend Nullifire FF197 Gun Grade Fire Rated PU Foam as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any...
FSi Flexi Coat Flexible Ablative Coating
Highly advanced flexible penetration and aperture sealing system, supplied in the form of both completed pre-coated Flexi-Coat Fingers and as a coating to be applied to stone/mineral wool backing material. Tested in accordance with EN1364-4 and is third party certified. To reinstate fire resistance through walls and floors Movement seals...
Sikacryl-620 Fire-Rated Sealant
Sikacryl-620 Fire is a fire rated 1-component, water- based intumescent sealant, suitable for use in hot and tropical climatic conditions. Designed for fire rated connection joints and penetration seals on porous and non-porous substrates. Sika now offer a Fire Stopping Solution Finder - a useful tool when needing assistance on specifying...
Pyroplex CE Intumescent Acrylic
Norseal Pyroplex CE Intumescent Acrylic, used to form linear gap seals where gaps are present in wall and floor constructions and linear joints where wall and floor constructions abut. Can also be used to form a penetration seal around metallic pipes and electrical cables to reinstate the fire resistance performance of wall and floor...
Nullifire FS719 HP Blue For CPVC
Nullifire FS719 HP Blue For CPVC is a unique sealant developed specifically for CPVC materials. It is used to reinstate the fire performance of compartment lines (walls and floors) which have been breached by CPVC combustible sprinkler systems or other CPVC systems. The product has a distinctive blue colour for easy visual identification and...
Rockwool Firepro Glue
Water based, fire resistant adhesive suitable for use with FirePro Beamclad and Rockwool Fire Duct Systems where glued joints or noggins are required. Can be used in conjunction with other Rockwool Stone Wool products where there is a requirement for a fire resistant adhesive Authorised for use in LUL surface and sub-surface premises and...
Astroflame FR-EC Fire Rated Economy Foam
1-component, self-expanding, ready to use polyurethane foam that uses ‘green’ propellants, harmless to the ozone layer and without greenhouse gas effects. Ready to use PU foam in a 750ml can - gun grade and hand-held available Fire retardant up to 240 minutes Efficient seal against smoke and gas Excellent adhesion on most construction...
Astroflame Penetration Seal Coating
A thicker formulation, for brush application, to coat plain stone wool as it is being installed by the user: it can also be be applied to insulation already in place on the services, adding to the fire resistance of the seal. Prevents the passage of fire, air and sound between fire rated compartments and has been tested in block wall,...
Nullifire FO142 Intutac Brush Grade Silicate Adhesive
Bonds structural steel and ductwork protection boards in internal situations. Sodium silicate adhesive Bonds in 5 minutes Fully cured in 8 to 12 hours Forms a water-resistant seal unaffected by moisture Forms to a non-combustible film to BS 476 Part 4: 1970
Sika Boom-420 Fire Resistant Foam
1-part, fire resistant, self-expanding polyurethane foam. It meets the fire resistance requirements of up to 180 minutes according to EN 1366-4. The combi-valve allows the application by either gun or nozzle. Sika now offer a Fire Stopping Solution Finder - a useful tool when needing assistance on specifying fire stopping solutions...
FSi PyroPro LST Fire Resistant Sealant
FSi PyroPro LST Fire Resistant Sealant is a water based acrylic sealant which has been developed utilizing specialist materials which significantly reduce smoke and toxic fumes in the event of a fire, therefore is authorised for use on the London Underground network, and other underground/ tunnel networks. Flexible, for use in gaps up to...
Nullifire FO143 Intutac Gun Grade Silicate Adhesive
Silicate-based adhesive, which can be applied with a caulking gun. FO143 is used to bond different kinds of materials in the fire protection industry. Up to 240 minutes fire resistance Suitable for bonding Nullifire FJ203 Fire Resistant Backer Rod in concrete joints, rock fibre boards, or for materials that require bonding and resistance...
Hensel Hensomastik K 2000 Special Adhesive
Flexible special adhesive that bonds fire-protection boards with additional mechanical fixing, serves as an installation aid when working with insulating materials and assists when bonding and sealing fire-protection boards for the construction of ventilation systems. Classified in accordance with DIN EN 13501-1 as A2-s1, d0 when 400 g/m²...
FSi PyroSeal 2K Fire Resistant Expanding Sealer
A 2-component polyurethane sealant system, manufactured with halogen-free intumescent fire retardants. On application the two components are mixed through a screw nozzle resulting in a reaction which causes the product to expand and swell around penetrating services. Intended to be used as a mixed penetration seal or cable penetration seal to...