- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Search results
Fosroc Conbextra TS
Fosroc Conbextra TS is a high-flow, non-shrink, thick-section, aggregate filled cementitious grout conforming to the requirements of BS EN 1504-3 Class R4. Suitable for use on concrete for free flow grouting for gap thicknesses from 75mm to 500mm. For smaller gaps please see Fosroc Conbextra HF. Recommended applications include large...
Fosroc Conbextra PM
Fosroc Conbextra PM is a single component thixotropic cementitious pumping and pointing mortar. Suitable for use for the structural grouting of gaps in precast concrete units and high strength pointing. Fosroc Conbextra PM requires only the addition of clean water to produce an easily pumped mortar. More Information Delivery Info
Fosroc Conbextra UW
Fosroc Conbextra UW is a non-shrink free flow or pumped cementitious grout for underwater installation conforming to the requirements of BS EN 1504-3 Class R4. Suitable for use underwater or in tidal zones where “wash out” would be a problem with conventional grouts. Recommended applications include stanchion baseplates, bridge columns, quay...
Fosroc Concure WB
Fosroc Concure WB is a water based concrete curing compound based on a low viscosity wax emulsion. For use as a spray applied membrane to retain moisture in concrete for effective curing. Suitable for all general concreting applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and...
Fosroc Conplast UW
Fosroc Conplast UW is an underwater concrete admixture used to minimise washout of concrete placed underwater. When added to concrete, Conplast UW produces a gel in the water phase which surrounds the cement particles and other fine components of the concrete mix and protects them from excessive washout both during placement and once the...
Fosroc Dekguard CP
Fosroc Dekguard CP is a weather resistant, clear, water based impregnation and glaze for use on concrete. It is designed to protect reinforced concrete from chloride ions, oxygen, carbon dioxide (CO²) and other aggressive chemicals. Dekguard CP has a wide range of uses, e.g. multi-storey car parks, office buildings, industrial buildings,...
Fosroc Dekguard E2000 Masonry Paint
Crack-accommodating elastomeric protective coating in white for reinforced concrete and masonry structures. Designed to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen and water, especially where there is a danger of subsequent cracks appearing within the substrate. Dekguard...
Fosroc Dekguard Elastic Masonry Paint
High performance crack-bridging elastomeric acrylic protective and decorative coating for concrete and masonry conforming to the requirements of BS EN1504-2. Designed to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen and water, especially where there is a danger of subsequent...
Fosroc Dekguard S Masonry Paint
High performance, solvent-based, aliphatic acrylic protective and decorative coating for concrete and masonry conforming to the requirements of BS EN 1504-2. Designed to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen and water, the product is also suitable to protect other...
Fosroc Dekguard A Plus Masonry Paint
Environmentally friendly high performance water-based acrylic protective and decorative coating for concrete and masonry conforming to the requirements of BS EN 1504-2. Suitable for use to protect atmospherically exposed reinforced concrete structures, cementitious substrates and masonry from carbonation, chloride ingress, weathering and...
Fosroc Supastik E10 Adhesive
Fosroc Supastik E10 Adhesive is a two-pack epoxy adhesive for use on concrete. Suitable for use as an adhesive with selected Fosroc products including Fosroc Expoband H45. Please see the Product Data Sheet for the relevant base product for application and mixing details for Supastik E10 Adhesive.
Fosroc Ancillaries
Fosroc Ancillaries are a range of application tools and accessories for use when applying Fosroc products. Range Includes: Fosroc Sealant Mixing Paddle, Fosroc Thioflex Follower Plate, Fosroc Polyurea Accessories Please see below for detailed information and order references where applicable
Fosroc Flamex Two
2-component high performance sealant which forms a tough, flexible rubber-like seal. Extensively fire tested in accordance with BS 476 Pt:20: 1987. Suitable for fire protection in expansion and construction joints in walls, floors and ceilings, confining smoke and fire, giving extra time for people to escape from a fire situation. Flamex...
Fosroc Primer P7
Fosroc Primer P7 is a one part chemically active clear liquid for brush application to concrete, stone, brickwork, timber and unglazed edges of ceramic tiles. For use as a primer before Fosroc Thioflex 600 and before selected products in the Fosroc range including Fosroc Flamex Two Please see the Product Data Sheet for the relevant base...
Fosroc Cure B
Fosroc Cure B is a spray on temporary curing membrane to retain moisture in freshly placed concrete. Ideal for use as a spray applied membrane to retain moisture in concrete for effective curing Suitable for all general concreting applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and...
Fosroc Galvafroid
Fosroc Galvafroid is a zinc rich coating formulated as an easily applied, cold galvanising protection against corrosion on all ferrous metals with a mid-grey, matt finish. Specifically designed to provide rust inhibiting protection to ferrous metalwork Complies with LU Standard 1-085 ‘Fire Safety Performance of Materials’ Please note:...
Fosroc Lokfix E35S
Fosroc Lokfix E35S is a two component polyester anchoring material, supplied in single component cartridges with astatic mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Ideal for use on concrete (solid, porous and light), masonry and hollow bricks, and...
Fosroc Lokfix E55S
Please Note: To check availability and to order this product please contact our Technical Department on 0113 2455450 (option 2). Fosroc Lokfix E55S is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel...
Fosroc Nitomortar S
Fosroc Nitomortar S is a solvent-free high strength, abrasion-resistant epoxy reinstatement mortar. Suitable for use for the fast and permanent reinstatement of concrete, particularly where high strength, abrasion-resistance and resistance to chemicals is required. The product is designed for horizontal use but can be applied vertically,...
Fosroc Nitomortar HB
Fosroc Nitomortar HB is based on a high performance solvent-free epoxy resin system. The special lightweight filler is specifically designed to give excellent ‘hanging’ properties for vertical and overhead work For the fast and permanent reinstatement of concrete, particularly where resistance to chemicals is required - Equal to the...
Fosroc Mulseal DP
Bitumen rubber / latex compound designed for use in damp proofing applications. Mulseal DP is suitable for uses such as a damp proof membrane to retaining walls, as a vapour barrier to panels and repairing fine cracks in asphalt surfaces. Suitable for use on most building materials such as concrete, brickwork, metals and stone. Complies...
Fosroc Nitobond AR
Fosroc Nitobond AR is a single component polymer emulsion and recommended primer for the Renderoc cementitious repair systems. Nitobond AR can be used as a curing membrane and also a concrete surface sealer in non-traffic areas May also be used as an economical dust proofer and surface sealer for non-trafficked cementitious surfaces...
Fosroc Nitobond EP
Fosroc Nitobond EP is a 100% solids solvent-free epoxy resin containing pigments and fine filler. Used for bonding new cementitious mortars and screeds including Patchroc GP and Paveroc to existing cementitious surfaces. Ideal for extensions and repairs to concrete in factories, loading bays, trucking aisles, bridges, roads, bonded or...
Fosroc Primer 7E
Fosroc Primer 7E is a two part primer for brush application to concrete, stone, brickwork, timber and unglazed edges of ceramic tiles where joints are to be intermittently or permanently immersed, or where the substrate is likely to be saturated and/or where compliance to EN14188 is required. For use as a primer before Fosroc Thioflex...
Fosroc Nitobond SBR
Fosroc Nitobond SBR is a modified styrene butadiene rubber emulsion which is supplied as a ready to use white liquid. It is designed to improve the qualities of site-batched cementitious mortars and slurries. For improving and bonding concrete repair mortars, floor toppings and screeds, waterproof renders and cementitious slurries Being...
Fosroc Thioflex 600
Fosroc Thioflex 600 is a two component polysulfide sealant which is available in gun and pouring grades. It is ideal for sealing movement joints in building and civil engineering structures, including superstructures, floors, basements and subways. Gun Grade is packed in a ready to mix, 2.5 litre tin containing the base and curing agent in...
Fosroc Thioflex 555 Hand Grade
Fosroc Thioflex 555 is a two component, polysulfide self-levelling type sealant designed to meet requirements in pavement applications. Retains movement accommodation of 35% on butt joints through temperature extremes Ideal for the sealing and maintenance of joints in concrete roads, concrete runways and hard standings Also available in...
Fosroc Nitobond HAR
Fosroc Nitobond HAR is a single component polymer emulsion and recommended primer for the Renderoc cementitious repair systems. Good vertical and overhead grab properties Supplied ready for use when used as a bonding primer Nitobond HAR is not designed for use as a curing membrane. For applications providing a curing membrane and...
Fosroc Nitoprime Zincrich Plus
Fosroc Nitoprime Zincrich Plus is the recommended anti-corrosion primer for exposed steel reinforcement for use with Fosroc concrete repair mortars. Fully compatible with all Renderoc mortars and fluid micro-concretes Complies with LU Standard 1-085 ‘Fire Safety Performance of Materials’. BS EN 1504-7: Reinforcement corrosion protection...
Fosroc Patchroc 250
Fosroc Patchroc 250 is a versatile, fast setting micro-concrete for rapid and permanent reinstatement of discrete thick section areas in concrete carriageways, pavements, airport aprons, access ramps, floors, columns and beams. Unique cement chemistry to rapidly reinstate thick sections of concrete without excessive heat generation and...
Fosroc Renderoc GP
Fosroc Renderoc GP is a general purpose medium density concrete reinstatement mortar specifically engineered for vertical repair work and can also be used as a render coat, and suitable for repair methods 3.1, 3.3, 4.4, 7.1, 7.2 as defined by BS EN 1504-3. Ideal for the reinstatement of concrete where low permeability characteristics are...
Fosroc Renderoc HB
Fosroc Renderoc HB is a high build, polymer modified, cementitious repair mortar. Its lightweight nature and high build characteristics makes it ideal for vertical and overhead repair work, and suitable for repair methods 3.1, 3.3, 4.4, 7.1, 7.2 defined by BS EN 1504-3. Ideal for the reinstatement of concrete where low permeability...
Fosroc Renderoc FC
Fosroc Renderoc FC is a single component polymer modified cementitious fairing coat designed for vertical and overhead use to infill honeycombing and voids up to 3 mm deep in the surface of concrete which is not trafficked and is subsequently coated. Exhibits excellent thermal compatibility with concrete and is fully compatible with other...