- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Search results
PPG SigmaCover 280
Universal epoxy anticorrosive primer suitable for ballast tanks, decks, topside, superstructure, hull and cargo oil tanks. Used in protective coating systems for steel and non-ferrous metals, curing at temperatures down to 5°C, and can be overcoated with most alkyd, chlorinated rubber, vinyl, epoxy and two-component polyurethane coatings....
PPG SigmaCover 555
PPG SigmaCover 555 is a two-component, polyamide-cured epoxy anticorrosive tiecoat, used as the final coat in epoxy underwater anticorrosive systems, with excellent adhesion for antifoulings. Excellent water resistance Good abrasion and impact resistance No induction time - 4 hours pot life 48 hours curing time before water immersion...
PPG SigmaCover 690
PPG SigmaCover 690 is a two-component high solids aluminium pigmented polyamine cured modified epoxy primer/coating designed for maintenance. SigmaCover 690 is a self-priming coating, tolerant to lower grades of steel preparation, and is compatible with most aged, good adhering coatings. It can be recoated with epoxy and polyurethane paints,...
PPG SigmaCover 2
SigmaCover 2, also known as Amerlock 2, a high-solids high performance self-priming low-VOC universal epoxy coating for substrates including carbon steel, concrete, masonry, galvanised steel, non-ferrous metal and stainless steel. The coating has numerous qualifications, including for nuclear service, flame spread, subsea surfaces and potable...
PPG SigmaCover 350
SigmaCover 350 is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating available in 2,600+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds. Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Surface tolerant primer/coating...
PPG SigmaCover 350 LT
SigmaCover 350 LT is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating that cures at temperatures down to -5°C (23°F), available in 2,600+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds. Available in 2,600+ colours, inc. RAL, BS, NCS & the new...
PPG SigmaCover 400
SigmaCover 400/Amerlock 400, a two-component, high solids, high performance self priming universal epoxy coating for steel and concrete, galvanising, stainless steel and non-ferrous metals, with low VOC. The coating has good adhesion on existing coats, compatible with prepared, damp surfaces, and has many qualifications including Nuclear...
PPG SigmaCover 410
PPG SigmaCover 410, formerley known as AmerCoat 410, a two-component general-purpose epoxy buildcoat in protective coating systems for steel and concrete structures exposed to atmospheric land or marine conditions. The coating has excellent durability and can be recoated with various two-component and conventional coatings, even after long...
PPG SigmaCover 435
PPG SigmaCover 435, two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating. Used as a buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions, curing at temperatures down to -10°C (14°F). A high relative humidity...
PPG SigmaCover 456
PPG SigmaCover 456, a two-component, high-build, polyamide-cured recoatable epoxy coating available in 2,600+ colours, for steel and concrete structures exposed to atmospheric land or marine conditions, curing at temperatures down to -10°C (14°F). SigmaCover 456 can be recoated with various two-component and conventional coatings, even after...
PPG SigmaCover 456 HS
PPG SigmaCover 456 HS is two component high solids polyamide cured recoatable zinc phosphate epoxy primer/coating. This general-purpose epoxy primer/coating is available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours, for steel and concrete structures in atmospheric exposure that can be recoated with various two-component...
PPG SigmaCover 522
PPG SigmaCover 522 is a two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating. It has excellent adhesion to, and sealing of, weathered, cleaned, zinc-rich primers and metal-sprayed steel, with good adhesion to properly pre-treated galvanized steel. Can be used in systems for atmospheric or water-immersed...
CLEARANCE - PPG SigmaCover 456 HS - RAL 1012 - 4L
Two component high solids polyamide cured recoatable zinc phosphate epoxy primer/coating. This general-purpose epoxy primer/coating is also available in 2,600+ colours, for steel and concrete structures in atmospheric exposure that can be recoated with various two-component and conventional coatings, even after long weathering periods. Used...
PPG SigmaCover 380
PPG SigmaCover 380 is a universal epoxy anticorrosive primer, based upon pure epoxy technology. Universal pure epoxy primer system suitable for ballast tanks, decks, topside, superstructures and hulls Good abrasion resistance for dedicated areas of application Suitable for immersion service (ballast tanks, outside shell) Good...
PPG SigmaCover 256
PPG SigmaCover 256 is a two component, high-build, polyamide-cured recoatable zinc phosphate epoxy primer. General-purpose epoxy primer or buildcoat in protective coating systems, for steel and concrete structures in atmospheric exposure. Suitable for atmospheric industrial and marine applications. Can be recoated with various...
CLEARANCE - PPG SigmaCover 456 BS 00 A 05 Goose Grey 4L
Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions, curing at temperatures down to -10°C (14°F). SigmaCover 456 can be recoated with various two-component and conventional coatings, even after long weathering periods. A high relative humidity...
PPG SigmaCover 295
Low-sheen red-brown epoxy primer. Good adhesion to steel and galvanized steel, industrial and marine applications. Suitable for touching up of weld seams and damages of epoxy coatings during construction. Can be overcoated with most alkyd-, chlorinated rubber-, vinyl-, epoxy- and two-component polyurethane coatings. Suitable on wet blast...