- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Search results
Visqueen Tapes
Visqueen tapes, used to bond and join damp proof course (DPC), membranes (DPM), vapour check, etc.
Visqueen Radon Sump
Pre-fabricated sump unit manufactured from moulded black ABS plastic. The unit has four equidistant perimeter outlet ports, along with a central outlet port for vertical pipework installation. Cost effective - provides sub-floor depressurisation when full radon protection is required Lightweight - easy to handle Simple design - quick to...
Visqueen Gas Barrier
Suitable for use in all types of buildings to prevent the ingress of harmful levels of ground gases e.g. methane, carbon dioxide and radon. The barrier can be positioned above or below reinforced cast in situ concrete floor slabs or above precast suspended segmental subfloors, e.g. beam and block floor. The barrier can also be used as a high...
Visqueen Ultimate HC BLOK
Suitable for use in all types of buildings to prevent the ingress of harmful levels of volatile organic compounds (VOCs), methane, carbon dioxide and radon. The barrier can be positioned above or below a concrete ground floor slab or above a precast suspended segmental ground floor system, e.g. beam and block floor. Also acts as a damp...
Visqueen Top Hat Units
Used in conjunction with Visqueen damp proof membrane and Visqueen radon membranes to provide continuity of protection at service pipe penetrations. Effective solution - provides an airtight and damp proof seal around service pipe penetrations Rapid installation - eliminates complex detailing More Info View Similar Products...
Visqueen Liquid Gas Membrane
Suitable for damp proofing, gas proofing and waterproofing a variety of substrates including concrete, flush pointed masonry and metal. Can be used above and below ground level including retaining walls, cast concrete, precast concrete and steelwork. Ideal for complex detailing and difficult to reach areas, and for use on insulated concrete...
Visqueen Radon Membrane R400
0.4mm thick co-polymer thermoplastic membrane. The product is red in colour and supplied 4m x 20m in a multi-folded roll. BBA certified - third party accreditation 0.4mm (1600 gauge) thick - complies with new BBA regulations for radon protection membranes in line with BS8485:2015+A1:2019 Increased thickness - provides greater impact...
Visqueen Ultimate RadonBlok 400
Used to prevent the ingress of radon in both basic and full radon protection areas. The membrane can be positioned within the ground floor construction either above or below the structural floor. Not intended for use where there is a risk of hydrostatic pressure Agrément certified - third party accreditation Conforms to BR 211:2023 -...
Visqueen Ultimate RadonBlok 600
Used to prevent the ingress of radon in both basic and full radon protection areas. The membrane can be positioned within the ground floor construction either above or below the structural floor. Agrement certified - third party accreditation Complies with NHBC Foundation’s NF94 guidance for use in Type A, Type B and Type C membrane...
Visqueen Ultimate Top Hat Units
Used to provide continuity of protection at service pipe penetrations in conjunction with all Visqueen damp proof membranes, gas and hydrocarbon protection systems. Effective solution - provides a gas and damp proof seal around service pipe penetrations Rapid installation - eliminates complex detailing Versatile - suitable for use with...
Visqueen Ultimate Geoseal
Pre-applied fully bonded Type A Barrier Membrane (Tanking Membrane) for use with below ground reinforced concrete structures e.g. basements, retaining walls, lift pits and car parks. The barrier also prevents the ingress of harmful levels of volatile organic compounds (VOCs) and hazardous ground gases. The pre-applied barrier can be used to...
Visqueen Low Permeability Gas Membrane
Used as a high performance radon membrane and/or damp proof membrane positioned within the ground floor construction either above or below the structural floor slab. BBA certified - third party accreditation Complies with NHBC Foundation’s NF94 guidance for use in Type A and Type B membrane locations in reinforced cast in situ suspended...
Visqueen Pro Detailing Strip
Used for gas protection systems, waterproofing system, and damp proofing systems for use on concrete, blockwork, brickwork, particle boards, steel work, steel stanchions and wooden structures for both vertical and horizontal application. Post applied against the structure, steel stanchions and forms complex detailing. It forms a 2-part system...
Visqueen Gas Resistant Self Adhesive Membrane
A cold applied product, suitable for use as a Type A Barrier Membrane (Tanking Membrane) for above and below ground applications e.g. basements, retaining walls and lift pits. It is also suitable for use in all types of buildings to prevent the ingress of harmful levels of ground gases e.g. methane, carbon dioxide and radon. Applied to a...
Visqueen Ultimate Gas Damp Proof Course
Suitable for all masonry wall applications including residential, commercial and multi storey buildings. It can be site formed into a built-in or surface fixed cavity tray to manage the downward passage of water in cavity wall applications. Complies with CIRIA C748:2014 - industry standard for volatile organic compounds (VOC) protection...
Visqueen IGW Admix
Used to provide Type B watertight concrete protection in accordance with BS8102:2022 in reinforced concrete basement walls and floors. Crystalline growth - provides continuous protection for the lifetime of the concrete structure Reduces water penetration - reduced permeability when compared to an equivalent plain concrete Improves...
Visqueen Axiom Guard
Suitable for damp proofing applications including concrete floors and masonry wall constructions. The product is also suitable for waterproofing below ground concrete substructures including retaining walls, cast concrete, precast concrete and steelwork. The product is ideal for complex detailing and difficult to reach areas. Agrement...
Visqueen Zedex Mastic
White, flame retardant, flexible sealant supplied in 380ml cartridges, used for the following: Sealing lap joints of Visqueen Zedex Non-Combustible Damp Proof Course cavity trays Sealing lap joints of Visqueen Zedex Non-Combustible Damp Proof Course cavity trays to Visqueen Non-Combustible Preformed Units Sealing Visqueen Zedex...
Visqueen Vapour Check
Green tinted, semi-transparent polyethylene air and vapour control layer (AVCL). The membrane is supplied in multi folded rolls, 2.45m x 50m and 4m x 50m. Versatile application - used within floor, wall and roof constructions Large format rolls - rapid installation Semi-transparent - stud locations visible through membrane More...
Visqueen Axiom Primer
Designed to prepare substrates prior to the application of Visqueen Axiom Guard. Significantly improves the bond of the Axiom liquid membrane and helps to ensure a long term watertight finish. Single pack - highly penetrative formulation - improves Axion Guard adhesion Easy to apply - applied by brush or roller Quick drying properties -...
Visqueen Axiom UniSeal
Visqueen Axiom UniSeal is specially formulated for waterproofing below ground structures, suitable for complex shapes, irregular profiles and angle fillets. Used to seal pipe penetrations and steel stanchions and around steel reinforcement, also on various surfaces including steel, timber, plywood, bitumen membranes, concrete and masonry....
Visqueen Protect & Drain
Used for below ground waterproofng applications where an externally applied Type A barrier membrane (tanking membrane) protection layer is required combined with an integral sub surface drainage layer. The product forms a void to collect and transmit water into adjacent sub surface drainage outlets or collector pipes and so reduce the risk of...
Visqueen CM8 Membrane
An internally applied vertical membrane as part of a Visqueen cavity drainage system. However in areas where the design permits, the membrane is suitable for use for both horizontal and vertical substrates. Suitable for use as part of a Type C waterproofing protection system in accordance with BS 8102:2022 Compliant with the requirements...
Visqueen CM20 Membrane
An internally applied vertical membrane as part of a Visqueen cavity drainage system. However in areas where the design permits, the membrane is suitable for use for both horizontal and vertical substrates. Suitable for use as part of a Type C waterproofing protection system in accordance with BS 8102:2022 Compliant with the requirements...
Visqueen Vapour Barrier
Green tinted, semi-transparent polyethylene air and vapour control layer (AVCL). The membrane is supplied in single wound (not folded) 2.0m x 50m roll format. Versatile application - used within floor, wall and roof constructions Large format rolls - rapid installation Semi-transparent - stud locations visible through membrane...
Visqueen A2 Vapour Barrier
Visqueen A2 Vapour Barrier is a multi-layer reinforced aluminium AVCL (air and vapour control layer). The product has a reflective aluminium finish on the upper surface and a matt aluminium surface on the reverse. The barrier is supplied in single wound rolls (not folded), 1.2m x 50m long. Achieves a reaction to fire classification A2 - s1,...
Visqueen Torch On Membrane
A heat bonded product, suitable for use as a Type A Barrier Membrane (Tanking Membrane) for above and below ground applications e.g. basements, retaining walls and lift pits. BBA certified - third party accreditation Type A Barrier Membrane (Tanking Membrane) - resistant to ground water in accordance with BS 8102:2022 Complies with BS...
Visqueen VX25 Waterstop
Used to block the passage of water at construction joints and day-joints in retaining walls which are 200mm wide or thicker. The system can be used in civil engineering applications. It is suitable in high compressive load applications. High quality butyl rubber and sodium bentonite - for concrete retaining walls Self expanding sealing bar...
Visqueen IGW Waterstops
Waterstops are used to block the passage of ground water at construction joints and day-joints in poured in-situ below ground concrete structures which are 175mm wide or wider e.g. retaining walls. High performance - performs to 6 bar Versatile - suitable for both horizontal and vertical construction joints Inbuilt activation delay -...
Visqueen EcoMembrane DPM
For use in ground floor constructions, positioned above or below the structural floor, to protect buildings against moisture from the ground. Not intended for use where there is a risk of hydrostatic pressure or accredited for radon applications. Suitability for use of 0.25mm (1000 gauge) Visqueen EcoMembrane DPM should be confirmed and...
Visqueen Waterstop Adhesive
Used to bond Visqueen IGW5 Waterstop, Visqueen IGW10 Waterstop and Visqueen VX25 Waterstop to horizontal and vertical construction joints and day-joints in poured in-situ above or below ground concrete structures of at least 250mm width e.g. retaining walls. Cartridge format - convenient and easy to apply High performance - provides...
Visqueen IGW Pipe Strap
Specifically designed for sealing around pipework positioned in below ground cast in-situ concrete structures. The product blocks the passage of ground water at the pipe-concrete interface. Versatile - suitable for 110mm to 125mm outside diameter pipework Inbuilt activation delay - suitable for use in wet weather conditions No tools...
Visqueen Pile Cap Sealer
Used to make the concrete surface waterproof for waterproofing Grades 1, 2, and 3 in accordance to BS8102:2022. It can be used on concrete piles, ground beams or concrete junctions as a link between membranes, or it can be used as a standalone waterproof system. It is also used where traditional membranes are not suitable. Can be applied...