- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Search results
Fosroc Auracast 200
Fosroc Auracast 200 is a cement admixture formulated using a unique combination of the latest generation of polycarboxylate polymers which act synergistically to outperform conventional superplasticisers. Specifically developed for the precast concrete industry coupling superior high range water reducing capabilities and excellent dispersion...
Fosroc Brushbond FLXIII
Fosroc Brushbond FLXIII is a two component, cementitious, polymer modified elastomeric waterproofing coating for concrete surfaces. Suitable for use on buried structures such as bridge abutments, culverts and retaining walls. Also for use on reinforced concrete roof decks, in conjunction with protective finishes. Brushbond FLXIII complies...
Fosroc Cebex 653
Fosroc Cebex 653 is a thixotropic stabiliser additive for cement grouts. Usage: It enables cement grouts to be used in moving water conditions. Designed for tunnel annulus grouting in soft ground or rock. Fosroc Cebex 653 can be used in marine environment contact with sea water. Please note: This product is Special order with a lead time of...
Fosroc Solvent 102
Fosroc Solvent 102 is a cleaning solvent for use with the Fosroc range of products.
Fosroc Thinner/Cleaner
Fosroc Thinner/Cleaner is for use with selected products within the Fosroc range.
Fosroc Cebex 100
Fosroc Cebex 100 is an expanding and plasticising powder admixture for site batched cementitious grouts where a reduced water/cement ratio and positive expansion is required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing. Cebex 100 is a suitable pre-stressing grout admixture when complying with BS 8110...
Fosroc Cemtop GP
Fosroc Cemtop GP is a polymer modified, cement based, floor levelling compound. Suitable for use as a general purpose self-levelling underlayment before the application of floor finishes such as tiles, carpet, vinyl or Fosroc Cemtop XD. Cemtop GP is also suitable as a floor finish for foot traffic or light commercial areas. Please also see...
Fosroc Cemtop XD
Fosroc Cemtop XD is a polymer modified, cement based, floor levelling compound. For use as a heavy duty, highly abrasion resistant floor surfacing system. Suitable for industrial and commercial buildings, for new construction or refurbishment projects. Please also see the 'Uses' table in the Product Data Sheet. Fosroc Cemtop GP is also...
Fosroc Nitoprime 33
Fosroc Nitoprime 33 is the recommended primer for the Fosroc Cemtop range of cementitious self-levelling floor toppings applied to concrete and cementitious substrates. It is a water-based primer which seals the substrate preventing the release of air by the concrete that could form bubbles in the flooring compound. In addition, it “wets” the...
Fosroc Nitoflor FC130
Fosroc Nitoflor FC130 is a two-component water based epoxy resin floor coating system supplied in pre-weighed packs ready for on-site mixing and use. Suitable for use on concrete and asphalt substrates including walls and floors in warehouses, garages, light industrial and food processing areas, kitchens and other areas of pedestrian and...
Fosroc Nitoflor FC150
Fosroc Nitoflor FC150 is a is a high performance, solvent free, epoxy resin coating system supplied in pre-weighed packs ready for onsite mixing and use. Suitable for use on concrete in production assembly areas, workshops, dairies, soft drinks production and bottling plants, breweries, kitchens, showrooms and internal car parks. It is...
Fosroc Nitoflor Anti-Slip Grains
Fosroc Nitoflor Anti-Slip Grains are a range of anti-slip additives which can be added to products including Fosroc Nitoflor FC150 and NitoFlor FC130 and other products in the Fosroc Nitoflor range to provide a slip resistant finish. Available in three grades: 'Fine*', 'Medium' and 'Course'. Please see the Product Data Sheet for the relevant...
Fosroc Nitoflor DPM
2-component, solvent-free liquid applied surface damp proof membrane and residual moisture suppressant for concrete floors. Suitable for use as an overlay damp roof membrane to cementitious surfaces which were laid without an underlaying damp proof membrane. Nitoflor DPM permits early overlaying with vinyls, carpets and resin based...
Fosroc Nitoprime 25
Fosroc Nitoprime 25 is a two component solvent containing primer consisting of modified epoxy resin. Suitable for use in conjunction with selected Fosroc Nitomortar, Nitoflor and Nitocote products on porous concrete. Please see the Product Data Sheet for the relevant base product for application and mixing details for Nitoprime 25. More...
Fosroc Nitoseal MS300
Fosroc Nitoseal MS300 is a one part, high modulus, damp tolerant, floor and pavement joint sealant based on hybrid silyl modified polyether technology. Suitable for use for sealing saw-cut and movement joints in internal floors, and external joints where abrasion resistance is required. It can also be used for external facade joints where a...
Fosroc Conbextra GP
Fosroc Conbextra GP is a high-flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of reinforcing steel bar. Suitable for free flow, cementitious grouting of gap thicknesses 10 to 75 mm. Recommended applications include stanchion baseplates, joints between pre-cast concrete...
Fosroc Colpor 200PF
Fosroc Colpor 200PF is a cold applied, high performance, pavement joint sealant conforming to the requirements of BS EN 14188-2:2004 and BS5212 Part1:1990. Suitable for use for the sealing and maintenance of joints in concrete roads, concrete runways and hard standings. Colpor 200PF is particularly suitable for sealing areas where fuel and...
Fosroc Expandafoam
Fosroc Expandafoam is a flexible, readily compressible, closed-cell polyethylene joint filler supplied in sheet form and as rectangular strips or circular section cords. Suitable for use as an expansion joint filler in brick and blockwork, isolation joints and hinge joints where a readily compressible low load transfer joint filler is...
Fosroc Nitoseal PU800
Fosroc Nitoseal PU800 is a two-component heavy duty gun grade epoxy urethane joint sealant. Suitable for use sealing internal joints subject to heavy loading and abrasion, or where chemical resistance is required. Used in joints between 5mm and 50mm wide. Can be used on concrete in factories, warehouses and distribution centres. It is...
Fosroc Conbextra BB
Fosroc Conbextra BB is a non-shrink cementitious bridge bearing grout. Formulated specifically for grouting of bridge bearings and parapet post baseplates. Also used for grouting beneath flanged lighting columns. The dry powder is a blend of Portland cements, graded silica sands and additives to which only a controlled amount of clean water...
Fosroc Nitoseal MS60
One part, low modulus sealant based on hybrid silyl modified polyether (“MS”) technology. Suitable for use for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints. Applied to joints between 5mm and 35mm wide For joint widths exceeding 35mm, please contact Rawlins...
Fosroc Nitoseal MS600
Fosroc Nitoseal MS600 is a one part, engineering sealant for immersed conditions based on hybrid silyl modified polyether technology. Suitable for use for sealing movement joints in buildings and civil engineering structures including joints that will be subject to intermittent or permanent immersion. Typical applications include - Potable...
Fosroc Nitoseal MS100
Fosroc Nitoseal MS100 is a one-part, primerless*, damp tolerant, non-staining façade sealant producing a tough, durable elastomeric seal. Uses: Formulated for stain-free sealing of joints in and around concrete, brick, masonry, pre-cast panels, stone cladding, windows, doors and fibre cement sheeting. Suitable for use over a wide range of...
Fosroc Hydrocell XL
Fosroc Hydrocell XL is a cross linked, semi-rigid, closed cell polyethylene sheet material used for forming or filling expansion joints between adjacent in-situ or precast components. Suitable for use in concrete, brickwork and blockwork providing excellent support to sealants subject to hydrostatic pressure and is particularly recommended...
Fosroc Nitoseal MS2 Primer
Fosroc Nitoseal MS2 Primer is a two-pack primer for use in joints subjected to high movement or where joints will be intermittently or permanently immersed during service. Suitable for use before the application of products in the Fosroc Nitoseal range including Fosroc Nitoseal MS300, Fosroc Nitoseal MS600, Fosroc Nitoseal MS60 and Fosroc...
Fosroc Primer P20
Fosroc Primer P20 is a one-pack primer for concrete joint faces used in conjunction with Fosroc Sealants. Suitable for use on joint faces in concrete roads, concrete runways and hard standings before the application of selected Fosroc products. Please see the Product Data Sheet for the relevant base product for application and mixing details...
Fosroc Conbextra BB92
Fosroc Conbextra BB92 is an ultra-high performance grout designed for structural grouted connections for onshore wind turbine foundations and non-structural offshore foundation connections, as well as for segmental concrete wind towers. Suitable for use for grouting beneath bridge bearings, parapet posts, flanged lighting columns, windfarm...
Fosroc Conbextra BM (Bedding Mortar)
Fosroc Conbextra BM (Bedding Mortar) is a single component cementitious high strength bedding mortar. Suitable for use in the structural bedding in of precast modular concrete units. Conbextra Bedding Mortar is a blend of Portland cements, chemical additives and graded aggregates. More Information Delivery Info
Fosroc Conbextra EP10
Fosroc Conbextra EP10 is a two component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical...
Fosroc Conbextra EPR
Fosroc Conbextra EPR is a three component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical...
Fosroc Lokfix S25
Fosroc Lokfix S25 is a two component polyester resin anchoring grout meeting the requirements of BS EN 1504-6 - Anchoring of reinforced steel bars. Suitable for use for anchoring of steel bars into concrete, brickwork, masonry and rock. Recommended applications include installation of starter bars, base plate bolts, MOT Bolts, installation...
Fosroc Solvent 105
Fosroc Solvent 105 is a cleaning solvent for use with the Fosroc range of products. Suitable for use with the Fosroc Lokfix range.
Fosroc Equipment Cleaner
Fosroc Equipment Cleaner is for use with selected products within the Fosroc range. Used with selected products within the Fosroc Nitoseal range.