- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Search results
Fosroc Nitoseal MS300
Fosroc Nitoseal MS300 is a one part, high modulus, damp tolerant, floor and pavement joint sealant based on hybrid silyl modified polyether technology. Suitable for use for sealing saw-cut and movement joints in internal floors, and external joints where abrasion resistance is required. It can also be used for external facade joints where a...
Fosroc Nitoseal PU800
Fosroc Nitoseal PU800 is a two-component heavy duty gun grade epoxy urethane joint sealant. Suitable for use sealing internal joints subject to heavy loading and abrasion, or where chemical resistance is required. Used in joints between 5mm and 50mm wide. Can be used on concrete in factories, warehouses and distribution centres. It is...
Fosroc Nitoseal MS60
One part, low modulus sealant based on hybrid silyl modified polyether (“MS”) technology. Suitable for use for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints. Applied to joints between 5mm and 35mm wide For joint widths exceeding 35mm, please contact Rawlins...
Fosroc Nitoseal MS600
Fosroc Nitoseal MS600 is a one part, engineering sealant for immersed conditions based on hybrid silyl modified polyether technology. Suitable for use for sealing movement joints in buildings and civil engineering structures including joints that will be subject to intermittent or permanent immersion. Typical applications include - Potable...
Fosroc Nitoseal MS100
Fosroc Nitoseal MS100 is a one-part, primerless*, damp tolerant, non-staining façade sealant producing a tough, durable elastomeric seal. Uses: Formulated for stain-free sealing of joints in and around concrete, brick, masonry, pre-cast panels, stone cladding, windows, doors and fibre cement sheeting. Suitable for use over a wide range of...
Fosroc Nitoseal MS2 Primer
Fosroc Nitoseal MS2 Primer is a two-pack primer for use in joints subjected to high movement or where joints will be intermittently or permanently immersed during service. Suitable for use before the application of products in the Fosroc Nitoseal range including Fosroc Nitoseal MS300, Fosroc Nitoseal MS600, Fosroc Nitoseal MS60 and Fosroc...
Fosroc Nitoseal MB333
Fosroc Nitoseal MB333 (formerly known as Nitoseal 333) is a hot poured, high extension polymer modified bitumen sealant complying with the requirements of BS 2499 :1993 Type N1. For the sealing and maintenance of joints in concrete roads and asphalt surfacing Movement accommodation factor of 25% in butt joints. For optimum performance,...
Fosroc Nitoseal MBN2
Fosroc Nitoseal MBN2 (formerly Pliastic N2) is a hot-poured rubber bitumen horizontal joint sealant for sealing movement and construction joints in pavements, floor slabs, water retaining and water excluding structures. Low extension grade for sealing joints in concrete pavements, etc Complies with BS 2499 :1993 Nitoseal MB77 also...
Fosroc Nitoseal MB77
Fosroc Nitoseal MB77 (Formerly Pliastic 77) is a hot-poured rubber bitumen horizontal joint sealant for sealing movement and construction joints in pavements, floor slabs, water retaining and water excluding structures. Hard grade for sealing low movement joints in factory floors and areas where joints are closely spaced and resistance to...
Fosroc Nitoseal PU12
Fosroc Nitoseal PU12 is a two-part, elastomeric joint sealant based on polyurethane technology. It is supplied in packs containing base compound and curing agent in the correct proportions which, when mixed, cure to form a tough rubber-like material. Adhesion to most commonly used construction materials is excellent. In special circumstances,...
Fosroc Nitoseal PU12 Accelerator
Fosroc Nitoseal PU12 Accelerator is a component added to Fosroc Nitoseal PU12 when mixing to enhance the initial cure rate, so that work can be completed between tides. For special circumstances, such as sealing sea defence works in tidal areas At 10°C the seal can be subjected to tidal immersion approximately 60 minutes after application,...