- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Service Transits, Pillows, Joint and Gap Seals
Seal apertures, intrusions, gaps and holes in fire-rated walls, floors, and ceilings with fire-stopping protection at Rawlins Paints. Form effective seals to reinstate compartmentalisation, preventing the spread of fire and smoke to aid evacuation and prevent further damage in the event of an emergency.
If you require more help to find and specify fire protection for your project or contract, our technical team are always on hand to advise. Give us a call on 0113 2455450 (option 2) or send a message to [email protected].
Astroflame X-Series Intumescent Fire Pillows
Designed to provide an effective fire barrier, on a temporary or permanent basis, for services which are subject to frequent changes or replacement. Pillows can be added, removed or rearranged in an aperture to accommodate to the needs of the situation and have been tested with metallic pipes, cables, cable bunches, cable trays and cable...
Nullifire FJ400 Intuspan
A very pliable intumescent expansion joint with a high level of movement that is suitable for gaps up to 100 mm, providing up to 2 hours fire performance with no adhesive required in most situations. Ideal for high vibration areas, such as lift shaft interfaces Can accommodate regular cycles of high or low amplitude movement Tolerates...
Quelfire QFP QuelStop Intumescent Fire Pillows
Help prevent the spread of fire through metal cable trunking systems that penetrate through flexible and rigid fire compartment walls, with up to 60 mins integrity. Can be used inside steel cable trunking up to 150x150mm where they penetrate fire compartment walls.
Rockwool Softseal Lamella Single Coated Coated Linear Strips
Incorporates a product specifically designed to accommodate movement within buildings in linear joint seals. Both vertical and horizontal joint applications. Part of the Rockwool Firepro range. Acoustically absorbent. CE Marked. Easy to handle and install. Tested for durability to current EU guidelines. Supplied pre-coated. Provides...
Rockwool Linear and Trapezoidal Firestop System
Made from dense, moisture resistant stone wool, allowing adequate compression yet retaining the necessary lateral stiffness for ease of installation. The Linear and Trapezoidal Firestop System can be manufactured to suit a wide range of steel profile dimensions. All Firestop products are supplied in standard lengths of 1m. Developed to...
FSi S-Line Fire Pillows
Creates a temporary or permanent fire barrier around all types of services to prevent the passage of fire through a compartment wall or floor, especially suitable where services are continuously being changed or replaced. Assumed working life 25 years For internal use Fire Resistance EN 1366-3 EI 120 and BS 476 - 240mins Fire...
Nullifire FJ203 Fire Resistant Backer Rod
Firestopping backer rod made from rock wool, sheathed with flexible glass wires. It is used to make fire-resistant expansion joints between masonry elements, wall and slab, directly exposed to fire or not, in hospitals, hotels, car parks, schools, airports, nuclear power plants etc. Can be used alone or in combination with Nullifire FS703...
Rockwool Softseal Lamella Double Coated Linear Strips
Incorporates a product specifically designed to accommodate movement within buildings in penetration seals. Acoustically absorbent. CE Marked. Easy to handle and install. Tested for durability to current EU guidelines. Supplied pre-coated. Part of the Rockwool Firepro range. Also available: Firepro Softseal Lamella Single Coated...
Quelfire QI Intufoam Linear Gap Seal
Versatile fire resistant linear gap seal intended to provide a fire stop seal for linear joints or at the junction of compartment floors and walls. The compressible foam core accommodates different joint widths and a number of products are available providing different fire ratings, in different gaps and orientations. Intufoam’s excellent...
Sika Backer Rod Fire Resistant Joint Sealing Material
A workable, mineral wool-based backing material wrapped with a glass-fibre yarn designed for fire resistant joint sealing in horizontal and vertical building structures, with up to 4 hours fire resistance (EN 1366-4). Easy to apply - Very versatile, can be combined with 3 joint sealants Adapts to irregularities the of joints Used in...
Rockwool Intumescent Pillows CE
Intumescent material encased within a waterproof glass cloth bag. They are designed to create a temporary or permanent fire seal around all types of services to maintain continuity of fire performance of compartment walls. They are an ideal solution for applications where services are required to be changed or replaced on a regular basis....
FSi Pass-it Transit System
Pre-assembled, multi layered intumescent device encased in a 2 part steel shell. It is designed to prevent the passage of fire between compartment floors and walls, offering smoke and acoustic isolation whilst still allowing for the easy installation/ removal of services. There are different sizes available depending on the number and size of...
Protecta FR Service Transit
Fire-resistant service transit for sealing wall and floor penetrations. Designed for use on drywalls, masonry, concrete, timber walls, and floors, ensuring fire protection around cables, pipes, and ducts. Maintains up to 240 minutes of fire resistance and provides an effective cold smoke seal. Certified to EN 1366-3 and EN 13501-2,...
Protecta Mineral Fibre Bio Backing Material
High-temperature insulation material, engineered for industrial applications. Suitable for use on furnaces, boilers, ovens, expansion joints, and as a fire protection backing material. Offers excellent thermal stability, tensile strength, and low thermal conductivity for energy-efficient insulation. Fully inert with no hazardous...
Nullifire FI064 Soft Joint Backer
64 kg rock mineral wool slab, to be cut on site and rotated through 90° to form a highly compressible backer with vertically orientated fibres. Specifically tested for a high movement backer, when used in conjunction with other Nullifire products. The system is suitable for both horizontal and vertical applications and can offer acoustic...
FSi Stopseal LJS Linear Joint Seal
Intumescent thermoplastic sealing system for fire resistance. Suitable for use on rigid walls, rigid floors, and linear construction joints. Certified to ISO 9001 and Emicode EC 1+ standards for quality and low emissions. Offers up to 240 minutes of fire resistance (E 240, EI 120) in rigid walls and floors. Restricted to professional...