- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 3 - Sherwin Williams Products
Sherwin-Williams Envirolastic 2500
Sherwin-Williams Envirolastic 2500 is a single coat, two-pack direct to metal polyaspartic primer/finish or a topcoat over approved primers. Long-term corrosion protection Independently certified to ISO12944:2018 Part 6 C3, C4 and C5 (Regime 2) Coating system design life up to 25 years or over Excellent gloss and colour retention...
Sherwin-Williams Heat-Flex Hi-Temp 1200
Sherwin-Williams Heat-Flex Hi-Temp 1200 is the next generation single- component inert multipolymeric matrix coating that outperforms alternatives in combating corrosion under insulation (CUI) and in high heat applications. Please note: Aluminium is normally a stock item, however we would recommend contacting our Sales Department on 0113...
Sherwin-Williams Transgard TG111V2
Sherwin-Williams Transgard TG111V2 is a high build 2-pack epoxy zinc phosphate primer/buildcoat, designed as anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning. High build 2-pack epoxy Designed as anti-corrosive protection of carbon steel surfaces Can be applied at thicknesses between 75 and 150 microns...
Sherwin-Williams Firetex FX1007
Sherwin-Williams Firetex FX1007 is a single pack thin film intumescent coating designed for site application by airless spray, to provide fire resistance for up to 60 minutes on structural steel. Endorsements include: Tested and assessed to EN13381-8 and BS EN13381-9 CE Mark Number: 2812-CPR-GA5055 European Technical Assessment:...
Sherwin-Williams Fast Clad 7220
Sherwin-Williams Fast Clad 7220 is a two component, fast-drying, phenalkylated zinc phosphate epoxy primer used as a multi-functional low temperature curing coating for the protection of carbon steel. For Industrial Use Only Specified for use as a primer for structural steel on blast cleaned steel for internal and external environments...
Sherwin-Williams Repacor SW-1000
An abrasion resistant, innovative 2-pack coating / putty for maintenance or repair of (mechanically) damaged coating areas. Solvent-free, 100% solids, CMR-free Easy-to-use packaging for difficult repair jobs Single layer coating Early water resistance and under water cure Surface tolerant - can be used on many substrates as manually...
Sherwin-Williams Macropoxy C401
Sherwin-Williams Macropoxy C401 (formerly known as Epigrip C401) is a high solids 2-pack epoxy, pigmented with micaceous iron oxide for use as an undercoat in conjunction with Sherwin-Williams Macropoxy high performance primers. Provides corrosion protection in a single coat, Network Rail approved.
Sherwin-Williams Dura-Plate UHS Primer
Sherwin-Williams Dura-Plate UHS Primer with Opti-Check OAP (Optically Activated Pigments) technology is a specially designed primer for use under Sherwin-Williams Dura-Plate UHS. It is ideal for use over prepared steel or concrete surfaces in industrial and marine exposures. Airless Spray Low odour Low VOC High flash point, >93°C...
Sherwin-Williams Fast Clad ER
Sherwin-Williams Fast Clad ER is a solvent-free, epoxy tank lining that offers superior flexibility, excellent edge retention, film forming and high build properties. Fast Clad ER enables ultra fast return to service in as little as 24 hours. One coat protection Fast return to service Low VOC Low odour Dry to walk-on within four hours...
Sherwin-Williams Macropoxy M330
Sherwin-Williams Macropoxy M330 (formerly known as Epigrip M330) is a 2-pack epoxy sealercoat for use over zinc silicate and other types of zinc rich primers. It is also used as a blast primer for use over stainless steel. Please note: This product is made to order subject to a minimum order quantity of 150L and an extended lead time of 14...
Sherwin-Williams Macropoxy P100
Sherwin-Williams Macropoxy P100, formerly known as Pipegard P100, is a high build 2-pack polyamide cured epoxy zinc phosphate primer/finish. Macropoxy P100 is used as an internal flow coating for pipelines. High build Two pack Used as an internal flow coating for pipelines Please note: This product is made to order subject to a minimum...
Sherwin-Williams Transgard TG110
Sherwin-Williams Transgard TG110 is a zinc phosphate pigmented 2-pack epoxy temporary protective primer, used as a temporary protective for steel surfaces prepared by abrasive blast cleaning. 2-pack epoxy temporary protective primer For steel surfaces Suitable for use in conjunction with cathodically protected steel Also suitable for...
Sherwin-Williams Nova-Plate 325
Nova-Plate 325 is an amine cured, glass and ceramic filled tank lining that utilises advanced epoxy novolac technology. It provides quick return to service, high film build and can be used in applications where conventional tank linings are not recommended. Extends service life It is engineered to protect cargo and steel tank interiors...
Sherwin-Williams Magnalux 42SF
Sherwin-Williams Magnalux 42SF is a 2-pack glass flake styrene free bisphenol polyester coating for steel surfaces prepared by abrasive blast cleaning in marine environments. It is recommended for applications where styrene is not desirable or prohibited. Part of the Magnalux rage of coatings. Approved to Norsok Rev 6 System 7A/7B Immersed...
Sherwin-Williams Magnalux 42PE
Sherwin-Williams Magnalux 42PE is a 2-pack isophthalic polyester acrylic glass flake coating for use in immersion environments. Part of the Magnalux range of products. Approved to Norsok Rev 6 System 7A/7B Recommended for use in immersion environments such as marine, aqueous and light chemical service and aggressive atomospheric...
Sherwin-Williams Magnalux 41V2
Sherwin-Williams Magnalux 41V2 is a two-component, sprayable high performance novolac glass flake vinyl ester tank lining. It is recommended for immersion environments where superior resistance to chemical attack is required. Part of the Magnalux range of coatings. Approved to Norsok Rev 6 System 7A/7B Suitable for many chemical...
Sherwin-Williams Magnalux 42PP
Sherwin-Williams Magnalux 42PP is a two/three component polyester-based holding primer for use under all polyester and vinyl ester coatings. Part of the Magnalux range of coatings. For use on both blast cleaned steel and concrete surfaces (service temp up to 85°C) Touch dry in approximately 1.5 hours at 23°C Low VOC - 0.8 gms/litre...
Sherwin-Williams Magnalux 41VP
Sherwin-Williams Magnalux 41VP is a two/three component vinyl ester based holding primer for use under all polyester and vinyl ester coatings. Part of the Magnalux range of coatings. For use on both blast cleaned steel and concrete surfaces (service temp above 85°C) Touch dry in approximately 1.5 hours at 23°C Low VOC - 0.8 gms/litre...
Sherwin-Williams Magnalux 43VC
Sherwin-Williams Magnalux 43VC is a two component resin-rich cold cured vinyl ester acrylic copolymer containing wax additives. Used as a protective coat over glass flake products in the Magnalux range of coatings. For use as a veil / topcoat in aggressive environments, which would attack the glass pigmentation in Magnalux Glass Flake...
Sherwin-Williams Macropoxy M630V2 - Special Colours
Water-based, 2-pack epoxy gloss finish for interior use only is available with 13 colours and is recommended for application to suitably sealed masonry walls, floors and ceilings. It may also be used on new and old concrete as well as previously painted surfaces and suitably primed steel. Please note that all colours listed are subject to...
Sherwin-Williams Heat-Flex M505 - Special Order
Sherwin-Williams Heat-Flex M505 - Special Order is an air drying silicone resin based heat resistant matt finish coating. It is used for application on to steel surfaces previously coated with Dox-Anode D5V2 or zinc or aluminium metal spray, where heat resistance is required. Maximum Surface Temperatures: White: up to 250°C with no...
Sherwin-Williams Epo-Phen FF - Special Order
Sherwin-Williams Epo-Phen FF - Special Order coating is a flake-filled (MIO) amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures and for immersion service in water and hydrocarbons such as gasoline, fuel oil, and diesel fuel. Temperature resistant to 218°C (425°F), constant;...
Sherwin-Williams Epidek M339 - Special Colours
A 3-pack epoxy high build anti-slip deck coating designed for spray application as a high profile anti-slip deck paint. May also be applied directly to suitable sound deck coatings. Please note: These colours (Black, Yellow and Bright Yellow) are available subject to a minimum order quantity of 200L and an extended lead time of up to 14...
Sherwin-Williams Epidek M153 - Special Colours
Sherwin-Williams M153 - Special Colours is an aggregate dressed, ultra heavy duty, hard wearing, coal tar free, solvent-less epoxy anti-slip deck coating. It is used for the treatment of deck surfaces subject to the most extreme of operational conditions requiring a high degree of impact and abrasion resistance, where a high level of anti-slip...
Sherwin-Williams Dura-Plate UHS - Light Green
Sherwin-Williams Dura-Plate UHS - Light Green is a fast curing solvent free epoxy lining coating which rapid return to service and high build, edge retentive properties of tank lining provides superior protection compared to conventional approaches or alternative products. Dura-Plate UHS is the user friendly solution for use in tanks...
Sherwin-Williams Acrolon C137V2 - Aluminium
A high performance, fast drying acrylic urethane aluminium gloss finish for use where long term exterior gloss and colour retention characteristics are required. Also available in 450+ tintable colours - see Sherwin-Williams Acrolon C137V2 Please note this product is made to order and is subject to a Minimum Order Quantity of 150L and may...
Sherwin-Williams Macropoxy 646 - Aluminium
Sherwin-Williams Macropoxy 646 - Aluminium is a versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting. Please note: Aluminium is made to order with an extended lead time of 14 days and a minimum order quantity of 200L Also readily available in 400+ colours,...
Sherwin-Williams Firetex M71V2 - Aluminium
Sheen decorative topcoat for the Firetex range of single pack intumescent coatings and also provides protection when used in internal semi-controlled conditions where condensation may occur (Category C2 as defined in ISO 12944-2). Please note: This product is made to order with a minimum order quantity of 150L and may be subjected to an...
Sherwin-Williams Firetex FX2007
Sherwin-Williams Firetex FX2007 is a single pack thin film intumescent coating designed for in-shop application by airless spray, to provide fire resistance for up to 60 minutes on structural steel. Endorsements include: Tested and assessed to EN13381-8 and BS EN13381-9 CE Mark Number: 2812-CPR-GA5055 European Technical Assessment:...
Sherwin-Williams Firetex Top SB
560+ matt solvent-based colours in a high build single pack PVC-AY topcoat for fire protection coatings. Specially designed for Firetex intumescent fire protection systems against humidity and mechanical strain. Used as topcoat on fire protected structural steelwork and concrete for weathering and / or decorative reasons. Also known as...
Sherwin-Williams Firetex Top WB
560+ water based matt colours in a single pack topcoat for fire protection coatings. Specially designed for Firetex and Pyroplast intumescent fire protection systems against humidity and mechanical strain. Used as topcoat on fire protected structural steelwork and concrete for weathering and / or decorative reasons. Also known as Unitherm...
Sherwin-Williams Macropoxy 2706 EG
A 2-pack epoxy primer and intermediate coating pigmented with micaceous iron oxide (MIO). Direct to hot-dip galvanized steel, stainless steel and aluminium Can be used as an intermediate coating for atmospheric corrosion protection on steel Suitable as sealer for thermal-sprayed zinc coatings Can be used as a primer under Firetex,...
CLEARANCE - Sherwin-Williams Cleanser/Thinner No.15
Sherwin-Williams Cleanser/Thinner No.15 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.