- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 2 - Special Use
Carboline Carboguard 890 GF
Carboline Carboguard 890 GF is a glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets, including marine applications. Surface tolerant characteristics for less severe applications Low-temperature version: 890 LT GF Self-priming and primer/finish capabilities Excellent abrasion to...
HMG Superthane
HMG Superthane is a 2K high build, polyurethane coating offering the ultimate levels of chemical resistance, graffiti resistance and superb durability. Superthane has been tested against a wide variety of substances to demonstrate its superb chemical resistance properties. This product MUST be purchased/used in conjuction with its...
Cromadex 495 High Temperature Resistant (up to 550°C) Primer Finish
Cromadex 495 High Temperature Resistant (up to 550°C) Primer Finish is a black, high temperature resistant primer finish suitable for items reaching temperatures of up to 550°C. The product has a fast touch dry time helping to improve productivity. It has excellent covering power helping to reduce application costs. More Information...
International Interzinc 22
International Interzinc 22 is a two component, rapid recoat, inorganic zinc rich ethyl silicate primer and is part of the Interzinc 22 Series of products that deliver consistently fast re-coating across a choice of 85%, 80%, 77% or 65% minimum zinc content products. The variable zinc levels allow you to tailor your choice of product to meet...
Sherwin-Williams Dura-Plate UHS
Sherwin-Williams Dura-Plate UHS is a fast curing solvent free epoxy lining coating which rapid return to service and high build, edge retentive properties of tank lining provides superior protection compared to conventional approaches or alternative products. Dura-Plate UHS is the user friendly solution for use in tanks containing a wide range...
HMG AR141 Matt Black
HMG AR141 Matt Black is an air dying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures up to 300ºC. The full physical properties are achieved after baking at temperatures above 220ºC (at this temperature the free silicones in the system auto cross link) At temperatures of up to 300ºC...
Sherwin-Williams Macropoxy C251
Sherwin-Williams Macropoxy C251(formerly Epigrip C251) is a two-pack epoxy phenolic primer finish coating for use as part of a 2 coat system for the internal coating of storage tanks and vessels. Suitable for insulated external carbon or stainless steel surfaces including equipment and pipework Suitable for use at up to 180°C operating...
Hempel Hempadur 85671
Hempadur 85671 is an amine adduct cured, phenolic epoxy (novolac) coating with very good adhesion and excellent chemical and high temperature resistance. For professional use only Use as interior lining in tanks, pipelines, railcars, etc, as external coating for the protection of insulated (CUI) and uninsulated process pipework and vessels...
Jotun Epoxy HR
Jotun Epoxy HR is a two component polyamine cured novolac epoxy coating that is heat resistant up to 200°C and can be applied on hot substrates up to 150°C. It can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates....
Carboline Thermaline 4700 Aluminium
Carboline Thermaline 4700 Aluminium is a single package silicone finish and high-performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C Resistant to severe thermal shock Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers Air-dries to touch (full...
Carboline Thermaline 4900
Carboline Thermaline 4900 is a single package, air-dried coating available in colours and suitable for high temperature exposures up to 260°C. Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Temperature resistance up to 260°C for black Air-dried curing capabilities...
International Intertherm 228HS
International Intertherm 228HS is a highly crosslinked, two component, high build epoxy phenolic coating suitable for exposure in a wide range of highly corrosive environments, including insulated and uninsulated carbon and stainless steel for use on the exterior of pipework, process vessels etc., operating at temperatures up to 230°C (446°F)....
PPG SigmaZinc 158
PPG SigmaZinc 158 is a two-component, moisture-curing zinc (ethyl) silicate anti-corrosive primer for structural steel. When suitably topcoated provides excellent corrosion protection for steel substrates up to 540°C (1000°F). Certificate for ASTM A-490 class `B` for slip coefficient Complies with the compositional requirements of...
Remmers Epoxy Universal
Chemical resistant, crack-bridging, solvent based, epoxy resin coating with a wide application spectrum. Tar-free Crack-bridging up to 0.2mm Resistant to chemicals Brushing and spraying consistence Thixotropic and drip-free Visible working operations possible (black-grey-black) Please Note: This product is subject to a lead time of...
PPG SigmaTherm 175
PPG SigmaTherm 175 is a heat-resistant modified alkyd aluminum finish that offers heat resistance up to 175°C (350°F). One component High-brilliancy Spray application improves the appearance Gloss finish Touch dry in 1 hour (at 20°C (68°F)) Ready to overcoat after 16 hours (at 20°C (68°F))
Jotun Tankguard Special Ultra
Jotun Tankguard Special Ultra is a two component polyamine cured novolac epoxy coating specially designed as a tank coating with excellent chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel and stainless steel...
Carboline Thermaline 450
Carboline Thermaline 450 is a two-component, highly cross-linked, glass-flake filled polymer that offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures. Suitable for insulated or uninsulated pipes, stacks and equipment operating up to 232°C. Temperature resistance up to 232°C High-build...
Sherwin-Williams Zinc Clad II EU
Sherwin-Williams Zinc Clad II EU is a self-curing solvent based, two component zinc silicate coating for the protection of blast cleaned steel surfaces. It is capable of withstanding temperatures up to 400°C and of curing at temperatures down to 0°C. For the protection of blast cleaned steel surfaces Capable of withstanding temperatures...
Resimac 301 Epoxy Resin and Hardener
301 Epoxy Resin and Hardener is a two component thixotropic solvent free epoxy material used for injection applications, bonding of dissimilar materials and for use in conjunction with 701/702 Glass Tape to produce high strength composite repairs. Can be applied to manual or mechanically prepared surfaces and then wrapped with woven glass...
Jotun Tankguard SF
Jotun Tankguard SF is a two component solvent free amine cured novolac epoxy coating that is a specially designed tank lining with very good chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and...
Carboline Carbozinc 11
Carboline Carbozinc 11 is a two-component, corrosion resistant primer that protects steel galvanically in the harshest environments. Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces Rapid cure. Dry to handle in 45 minutes at 16°C and 50% relative humidity Low temperature cure down to -18°C High zinc...
Carboline Thermaline 440 Finish
Carboline Thermaline 440 Finish (formerly Thermaline 400 EU) is a high performance, immersion grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. Used to protect steel substrates under thermal insulation. This product MUST be purchased/used in conjunction with its manufacturer specified...
PPG PhenGuard 940
PPG PhenGuard 940 is a two-component, high-build, amine adduct-cured novolac phenolic epoxy finish; the final coat in the Phenguard tank coating system, with excellent resistance to a wide range of acids, alcohols, edible oils, solvents and fats (regardless of free fatty acid content). Final coat in the PHENGUARD tank coating system:...
Resimac Resichem 511 UCEN
Resichem 511 UCEN is a high build solvent-free epoxy novalac coating designed to provide outstanding chemical and corrosion protection of steel and concrete structures. The coating is particularly resistant to attack by strong acids including 98% sulphuric acid and 36% hydrochloric acid in immersion conditions. Must be applied as a 2 coat...
Sikaflex 403 Tank & Silo
Sikaflex 403 Tank and Silo is a 1-part, moisture curing, polyurethane elastic tank and silo sealant. Designed for sealing steel containers built in sections such as enamelled steel or stainless steel tanks Resistant to domestic and municipal sewage, liquid manure and silage liquid Good mechanical resistance Very good resistance to...
International Interline 925
International Interline 925 is a two component, solvent free, heavy duty epoxy tank lining for application to steel tank internals. Provides corrosion resistance to a range of products including crude oil, white oils and potable water
International Intertherm 751 CSA
International Intertherm 751 CSA is a high performance coating that is applied using standard application equipment and cures effectively at ambient temperatures. Capable of providing corrosion protection to steel in both atmospheric service and under thermal insulation operating in thermal cyclical conditions between -196°C (-321°F) and 400ºC...
PPG Dimetcote 9
PPG Dimetcote 9 (also known as Sigmazinc 9), is a two-component, moisture-curing zinc (ethyl) silicate coating for structural steel that can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), with good resistance to impact and abrasion. Anti-corrosive primer for structural steel. Specified for structural joints...
PPG SigmaGuard 720
PPG SigmaGuard 720, a two-component, reinforced high solids tank coating, based upon polyamine adduct cured pure epoxy technology. The coating has recognized corrosion control (Lloyd`s Register) and short curing periods, . Tank coating with good chemical resistance against a wide range of chemicals Short curing periods and easy to clean...
Hempel Silvium 51570
Hempel Silvium 51570 is an oleoresinous general purpose aluminium topcoat with good heat resistance and good light reflection. Complies with EU Directive 2004/42/EC, subcategory i. Recommended as a finishing coat for protection of hot pipelines, exhaust pipes, smokestacks and other hot surfaces on steel and woodwork in mild to moderately...
Jotun Tankguard HB Classic
Tankguard HB Classic is a pure epoxy tank coating suitable for both transportation and storage of a wide range of chemicals including crude oil, aromatic and aliphatic solvents and others. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments Suitable for properly prepared carbon steel, galvanised steel,...
Jotun Solvalitt Zinc
Jotun Solvalitt Zinc is a one component physically drying zinc rich silicone coating that is heat resistant up to 400°C. It can be used as a primer in atmospheric environments and suitable for properly prepared carbon steel substrates.
International Interline 850
International Interline 850 is a two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining coating to provide corrosion protection for the internals of steel storage tanks and pipes containing a range of products. Can be used direct to metal, as both the holding primer and build coat in a system High...