- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 2 - Intumescent Paint for Steel
Bollom Brosteel Ultra 60 - Gloss 60min System for Hollow Sections
Fire protection pack with 4,400+ gloss colours that provides sufficient intumescent basecoat (Bollom Brosteel Ultra 60) and coloured topcoat (Bollom Flameguard Ultra Gloss) to protect suitably primed, standard Square, Rectangular and Circular steel hollow sections in internal environments to 60 minute fire resistance. Achieves 1 hour (60...
Hempel Hempafire Pro 400 Fast Dry
Hempafire Pro 400 Fast Dry is a one component, solvent-borne, physically fast drying intumescent coating for passive fire protection of structural steel against cellulosic fires. It is optimized for R90, R120 and for inshop and on-site applications. As intumescent fire protection for structural steel in interior and exterior conditions, up...
International Interchar 1190
International Interchar 1190 is a thin film water-borne intumescent coating optimized for 90 and 120 minutes fire resistance, as part of the Interchar range for cellulosic fire protection, International Interchar 1190 will maintain your architectural aesthetics for fire resistance periods up to 120 minutes on structural steelwork. Best in...
Bollom Brosteel Ultra 60 - Gloss 30min System for Universal Beams & Columns
Fire protection pack with 4,400+ gloss colours provides sufficient intumescent basecoat (Bollom Brosteel Ultra 60) and coloured topcoat (Bollom Flameguard Ultra Gloss) to protect suitably primed, standard ‘ɪ’ shape structural steel beams and columns in internal environments to 30 minute fire resistance. Achieves 1/2 hour (30 mins) fire...
Bollom Brosteel Ultra 60 - Gloss 60min System for Universal Beams & Columns
Fire protection pack with 4,400+ gloss colours provides sufficient intumescent basecoat (Bollom Brosteel Ultra 60) and coloured topcoat (Bollom Flameguard Ultra Gloss) to protect suitably primed, standard ‘ɪ’ shape structural steel beams and columns in internal environments to 60 minute fire resistance. Achieves 1 hour (60 mins) fire...
Nullifire SC900 On-Site Intumescent Steel Coating Repair Kit
Enables seamless repairs to accidental damage in isolated areas in order to preserve fire integrity, such as long-term repairs to accidental damage caused to an SC901 or SC902 coating. Up to 120 minutes fire resistance Can be applied to a smooth matt finish A compatible top seal can be applied if a decorative finish is required Maintains...
International Interchar 2060c
Interchar 2060c is an improved weather resistant version of Interchar 2060 recommended for a C4 environment as per ISO 12944-2:2007. Allows Interchar 2060c to remain untopcoated for up to 6 months provided there is no pooled/heavy running water, or frequent high humidity conditions. We do not recommend leaving the product untopcoated without...
Bollom Brosteel Ultra 60 - Gloss 30min System for Hollow Sections
Fire protection pack with 4,400+ gloss colours that provides sufficient intumescent basecoat (Bollom Brosteel Ultra 60) & coloured topcoat (Bollom Flameguard Ultra Gloss) to protect suitably primed, standard Square, Rectangular & Circular hollow section steel in internal environments to 30 minute fire resistance. Achieves 1/2 hour...
International Interchar 1260
International Interchar 1260 is a single component, borate, chlorine and APEO free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Class leading thin film waterborne intumescent coating Zero VOC* formulation reduces environmental impact...
Jotun Steelmaster 900WF
Jotun Steelmaster 900WF is a one-component, waterborne acrylic thin film intumescent coating; Independently approved for fire protection of structural steel exposed to cellulosic fire. Suitable on approved primers on carbon steel substrates Fire tested and approved to BS 476 part 20/21 Suitable for structural steel exposed to internal...
International Interchar 212
International Interchar 212 is a high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating designed to be used on steelwork requiring protection from cellulosic fires. Offers up to 3 hours fire protection Approvals to a range of fire standards Compatible with a range of topcoats and colours...
International Interchar 1120
This product is temporarily unavailable; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. International Interchar 1120 is a single component, borate and chlorine free, water borne intumescent coating designed for on-site...
PPG SteelGuard 801
A one component thin-film solvent-borne intumescent coating for fire protection of structural steelwork, providing up to 120 minutes of protection from cellulosic fires. Suitable for C1 to C4 internal and external environments (ISO 12944); for dry internal (C1) environments no topcoat is required Tested and assessed to EN 13381-8, BS...
PPG SteelGuard 851
A one component thin-film solvent-borne intumescent coating for fire protection of structural steelwork. Short handling times are accomplished due to the fast-drying nature of this coating, and provides up to 120 minutes of protection from cellulosic fires. Suitable for C1 to C4 internal and external environments (ISO 12944); for dry...
Nullifire SC902 Fast Track On-Site Intumescent Steel Coating
SC902, a low VOC, one coat, two-pack high build system, based on patented technology to provide a fast cure effective structural fire performance for steelwork, up to a 120 minute fire rating. Can be applied to a smooth matt finish, and a compatible top seal can be applied if a decorative finish is required. Includes Optifire+ technology -...
Sherwin-Williams Firetex FX1007
Sherwin-Williams Firetex FX1007 is a single pack thin film intumescent coating designed for site application by airless spray, to provide fire resistance for up to 60 minutes on structural steel. Endorsements include: Tested and assessed to EN13381-8 and BS EN13381-9 CE Mark Number: 2812-CPR-GA5055 European Technical Assessment:...
International Interchar 2090
International Interchar 2090 is a single component, solvent borne, borate free, high solids, low VOC intumescent coating designed to maintain your architectural aesthetics whilst providing fire protection for up to 120 minutes for columns, I-sections, cellular beams and hollows. Solvent borne intumescent coating with excellent durability...
International Interchar 1290
A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to structural steel requiring protection from cellulosic fire. Low VOC acrylic intumescent material Independently fire tested in accordance with BS 476 Parts 20-22 Up to two hours cellulosic fire protection on hollow sections...
PPG SteelGuard 751
PPG SteelGuard 751 is a one-component thin-film solvent-borne intumescent coating for fire protection of structural steelwork. Provides up to 120 minutes protection from cellulosic fires. Tested and assessed to EN 13381-8, BS 476-20/21 and AS 1530.4 CE marked product, ETA 15/0439 Assessed to ETAG 018-2 for all durability classifications...
Tikkurila Fontefire ST60
Tikkurila Fontefire ST60 is a water-borne, one-component intumescent paint formulated for the fire protection of structural interior steel elements. For structural steel elements in internal conditions according to ETAG 018-2 Type Z² Competitive film thickness For various sizes of structural steel “H” and “I” shaped beam and column...
Hempel Hempacore One FD 43601
Hempacore One FD 43601 is a fast drying one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires, suitable for in-shop and on-site applications. Use as intumescent fire protection for internal and external structural steel. Suitable for open beams and...
Hempel Hempacore AQ 48860
Hempacore AQ 48860 is a one-component water-borne, chlorine free, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires. No VOC (according to ISO11890-2) and is suitable for in-shop and on-site applications. For professional use only Use as intumescent fire protection for structural...
Tikkurila Fontefire ST60-1
Tikkurila Fontefire ST60-1 is a water-borne, thin film intumescent coating for efficient protection against cellulosic fires. When subjected to heat it expands and forms an insulating layer of foam. The design temperature range is from 350°C to 750°C, with up to 12 minutes of fire protection. Due to highly competitive loadings, reduces...
Sherwin-Williams Firetex FX2007
Sherwin-Williams Firetex FX2007 is a single pack thin film intumescent coating designed for in-shop application by airless spray, to provide fire resistance for up to 60 minutes on structural steel. Endorsements include: Tested and assessed to EN13381-8 and BS EN13381-9 CE Mark Number: 2812-CPR-GA5055 European Technical Assessment:...
PPG SteelGuard 951
Light grey matt. For fire protection of structural steelwork from cellulosic fires. Provides up to 180 minutes protection. Highly durable, epoxy intumescent coating suitable for internal and external use. Excellent corrosion protection suitable for: X environments without topcoat as per EAD 350402-00-1106 C5 environments without...