- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 2 - Tank & Pipe Lining Coatings
Subcategories
International Interline 955 Retarder Solution
International Interline 955 can be applied in a wide range of climatic conditions, including material temperatures up to 35°C (95°F). However, at material temperatures greater than 25°C (77°F) the use of International Interline 955 Retarder Solution is required in order to maintain the working pot life, allowing normal airless spray methods to...
Sherwin-Williams Fast Clad ER
Sherwin-Williams Fast Clad ER is a solvent-free, epoxy tank lining that offers superior flexibility, excellent edge retention, film forming and high build properties. Fast Clad ER enables ultra fast return to service in as little as 24 hours. One coat protection Fast return to service Low VOC Low odour Dry to walk-on within four hours...
Sherwin-Williams Macropoxy P100
Sherwin-Williams Macropoxy P100, formerly known as Pipegard P100, is a high build 2-pack polyamide cured epoxy zinc phosphate primer/finish. Macropoxy P100 is used as an internal flow coating for pipelines. High build Two pack Used as an internal flow coating for pipelines Please note: This product is made to order subject to a minimum...
Sherwin-Williams Nova-Plate 325
Nova-Plate 325 is an amine cured, glass and ceramic filled tank lining that utilises advanced epoxy novolac technology. It provides quick return to service, high film build and can be used in applications where conventional tank linings are not recommended. Extends service life It is engineered to protect cargo and steel tank interiors...
Jotun Tankguard Holding Primer
Jotun Tankguard Holding Primer is a two component polyamine cured phenolic/novolac epoxy coating. Designed as a holding primer or primer in a complete tank coating system. It has excellent chemical resistance Can be used as primer in atmospheric and immersed environments Suitable for properly prepared carbon steel, galvanised steel,...
Carboline Carboguard 891
High solids, high-build potable water coating widely used for lining interior steel and concrete tanks, valves and pipe. Formulated for application at conventional builds (100 - 250 microns per coat) as well as high builds (250 microns per coat). Excellent film build and edge protection VOC compliant to current AIM regulations Meets or...
Carboline Plasite 4550
Carboline Plasite 4550 is a two-component, 100% solids, reinforced, premium novolac epoxy coating for internal tank lining. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, strong inorganic acids, some solvents, sour crude oil and 98% sulfuric acid. High Impact Resistance Superior adhesion to metal substrates...
Carboline Plasite 7122 VAR
Carboline Plasite 7122 VAR is a two-component, cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VAR, is an abrasion resistant tank lining and industrial maintenance coating. Excellent overall chemical resistance to a wide...
Carboline Plasite 7122 VOC
Carboline Plasite 7122 VOC is a two-component, cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VOC is used as a tank lining and for industrial maintenance. Excellent overall chemical resistance to a wide range of acids,...
Carboline Plasite 7122 VTF
Carboline Plasite 7122 VTF is a two-component, cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance (acids, alkalies and solvents) and ease of handling on steel, galvanised, concrete or CMU. Smooth non-stick surface with good abrasion resistance and flexibility...
Carboline Plasite 7159
Carboline Plasite 7159 is a two-component, water-resistant epoxy coating polymerized with a polyamine type curing agent. Also a high-performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry. Easy-to-apply high...
Carboline Plasite 7159 HAR
Carboline Plasite 7159 HAR is a two-component, water-resistant epoxy coating polymerized with a polyamine type curing agent. A high-performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry. This HAR version of Plasite...
Carboline Plasite 9060 LT
2-component, high performance tank lining with curing characteristics allowing the coating to be applied and cure at temperatures as low as 2°C while achieving unmatched chemical resistance in caustic, acid, solvent and ethanol service. Formulated for use in a large variety of facilities including waste water, chemical and fuel storage,...
Carboline Polyclad 767
Carboline Polyclad 767 is a two-component, high performance pipe coating specially designed for the protection of pipeline interiors. Typical application could be pipeline interiors for water transmission. Fast curing rate increases throughput Superior wetting properties result in better edge retention and excellent adhesion to steel...
Carboline Polyclad 975
Carboline Polyclad 975 is an advanced two-component, 100% solids, hybrid epoxy pipeline coating. Polyclad 975 has performance properties designed for corrosion protection of steel and ductile iron pipe exteriors, girth welds or tie-ins. Quick dry to touch and QC times Colour indicator confirms proper mixing Low temperature cure 4.4°C...
Carboline Polyclad 975 H
Carboline Polyclad 975 H is an advanced two-component epoxy, 100% solids, hybrid epoxy pipeline coating. Quick dry to touch and QC times - good brush and roll properties Colour indicator confirms proper mixing Low temperature cure 4.4°C Excellent cathodic protection performance Film build up to 30 mils DFT in one coat Excellent edge...
Carboline Polyclad 956
Carboline Polyclad 956 is a two-component epoxy, solvent-less, high gloss, smooth epoxy coating for the lining of gas transmission pipelines. It’s hard, smooth surface aids in the flow of gas by reducing turbulence while protecting the interior surfaces from corrosion. Improves flow efficiency in gas pipes Meets API RP5L2 requirements...
Carboline Polyclad ARO
Carboline Polyclad ARO is a two-component, high performance pipe coating specially designed for the protection of FBE coated pipeline from gouge and mechanical damage during directional drilling or slip bore installations. It absorbs the destructive energy and minimizes coating damage. Excellent gouge and abrasion resistance High...
PPG NovaGuard 260
PPG NovaGuard 260, a two-component, high build, amine adduct-cured novolac phenolic epoxy tank primer/coating with excellent resistance to alcohols, fats, solvents and various other chemicals. Novaguard 260 also has good abrasion resistance. Used for hot water and hot oil storage up to 90°C (195°F) Good application properties that results...
PPG NovaGuard 840
PPG NovaGuard 840 is a two-component, solvent-free, amine-cured novolac phenolic epoxy coating suitable for heavy H2S wastewater environments. such enviroments include unleaded fuel tanks, particularly in aviation, with good chemical & solvent resistance, especially to crude oil up to 120°C (250°F). Good visibility due to light color...
PPG NovaGuard 890
PPG NovaGuard 890 is a two-component, solvent-free, amine-cured novolac phenolic epoxy coating that is ideal for use in storage of unleaded gasolines blended up to 100% ethanol (E5 up to E100), biodiesels (EN14214) & crude oil up to 120°C (250°F). Excellent resistance to crude oil up to 120°C (250°F) Suitable for storage of unleaded...
Tikkurila Temaline EPL 100
Tikkurila Temaline EPL 100 is a two-component chemical resistant epoxy phenolic paint that is resistant to high temperatures. Withstands dry heat up to 150ºC, but discolouration possible. Suitable for immersion of hot water between 65ºC - 90ºC. Due to binder type has especially good resistance towards many chemicals including light crude...
Tikkurila Temaline LP Primer
Tikkurila Temaline LP Primer is a two-component, amine-adduct-cured epoxy paint. It is used as a primer and an intermediate coat in epoxy systems inside kerosene and oil tanks. Good chemical resistance. Withstands splashes and immersion in water and chemicals, such as aliphatic hydrocarbons, alkaline solutions and mild acids. Good...
Tikkurila Temaline TL
Tikkurila Temaline TL is a two-component, solvent free epoxy coating. Very high sag resistance, which enables achieving a thick paint film with one application. The product is an excellent choice for tanks and reservoirs storing many kinds of fuels like gasoline, diesel, kerosene and lead-free gasoline. Intended for use as a heavy-duty...
Sherwin-Williams Magnalux 41V2
Sherwin-Williams Magnalux 41V2 is a two-component, sprayable high performance novolac glass flake vinyl ester tank lining. It is recommended for immersion environments where superior resistance to chemical attack is required. Part of the Magnalux range of coatings. Approved to Norsok Rev 6 System 7A/7B Suitable for many chemical...
Hempel Hempaline Defend 630 Cure 72 37820
Hempaline Defend 630 is a solvent free high performance epoxy novolac lining with excellent chemical resistance to a wide range of chemicals and solvents. May be applied as a one or two coat scheme, and as part of a hand lay or spray applied glass fibre reinforced system High performance tank lining for the storage of a wide range of...
Hempel Hempadur 35760
Hempadur 35760 is a solvent-free, two-component, high-build phenolic epoxy paint, which cures to a durable tank lining with very high corrosion protection properties and excellent chemical resistance. For professional use only As a tank lining for new and old storage tanks containing oils, fuels, bio fuels and a wide range of chemicals,...
Resimac 209 EIP PU
209 EIP PU is a flexible high build solvent-free polyurethane coating designed for application to surfaces subject to extreme impact, wear and abrasion from slurries and aggregates. Typical applications include Chutes, Hoppers, Pumps, Valves, Pipe work. Note: Colours are approximate and not a binding representation of the final product...
Resimac Resichem 503 SPEP
Resichem 503 SPEP is a low viscosity epoxy primer designed to seal concrete and cementitious surfaces. On curing the primer consolidates the surface and ensures excellent adhesion of other coating systems. Penetrating primer for concrete and cementitious surfaces such as internal & external tanks surfaces, floors, structural concrete....
Resimac Resichem 501 ARXL
Resichem 501 ARXL is a high build solvent-free abrasion resistant epoxy coating containing hardened ceramic particles to give superior abrasion resistance to steel and concrete structures. Resichem 501 ARXL must be applied as a 2 coat system to properly prepared surfaces. Note: Colours are approximate and not a binding representation of the...
Resimac Resichem 513 AREN
Resichem 513 AREN is a high build solvent-free epoxy novolac coating designed to provide outstanding abrasion & chemical protection of steel and concrete structures at elevated temperatures. The coating contains hardened ceramic particles making it ideal for highly abrasive environments with strong industrial chemicals and acids. Note:...
Resimac Resichem 580
Resichem 580 is a two component rapid solidifying pourable silicone polymer system that has been designed to create flexible heat resistant seals in situ. Ideal for sealing leaking low pressure steam, vapour or gas lines. For professional use only Please note: this product is subject to a 28 Working Day lead time More Information Delivery...
Sherwin-Williams Dura-Plate UHS - Light Green
Sherwin-Williams Dura-Plate UHS - Light Green is a fast curing solvent free epoxy lining coating which rapid return to service and high build, edge retentive properties of tank lining provides superior protection compared to conventional approaches or alternative products. Dura-Plate UHS is the user friendly solution for use in tanks...