- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 4 - Watco Products
Watco Fastcoat
A new type of resin formulation significantly reducing time taken to paint a floor and put back into use. 5 colours available as well as an anti slip finish for a finely textured, easy clean surface. Revolutionary, high performance, two part, polyaspartic resin formulation Exceptionally fast curing - apply 2 coats in one day to reduce...
Watco Safety Coat Food Safe
A safety surface paint certified for use in food manufacturing and storage areas, with a fast-curing anti-slip coating. Meets requirements for EN14/3 (Food taint test) Excellent abrasion and UV resistance Can be applied at a temperature range of minus 10-30°C Note: While great care is taken with the colour samples shown, no guarantee...
Watco Asphalt Paint Rapid
Hard wearing chlorinated rubber based exterior coating with a matt finish, that is ideal for coating exterior concrete and asphalt. It is showerproof in only one hour and can be applied at temperatures as low as 5°C. Easy to apply by brush or roller, it offers exceptional wear resistance making it ideal for highlighting traffic areas and...
Watco Fluted Rubber Mat
Watco Fluted Rubber Mat is a durable anti slip rubber mat with a ribbed surface for use around workstations, benches and walkways, can even be used on bench work surfaces. Effective slip-resistance due to the fine ribbing Resistant to water and most mild acids More Information Delivery Info
Watco Tape Primer
Seal and bind dusty, porous surfaces with Watco Tape Primer before applying self-adhesive tapes to promote good adhesion. Recommended for use on unsealed, porous concrete, brick and stone. Seals and binds porous surfaces Ready in 30 minutes Just one coat needed Ensures good adhesion More Information Delivery Info
Watco Epoxicote High Build Concrete Floor Paint
An extra-thick epoxy resin floor coating for very heavy trafficked floor areas in warehouses, garages, production areas and showrooms, receptions, oil and chemical areas, with options for high-build, anti-slip, cold-cure, and rapid-drying from the drop-down menu below. Heavy duty protection for floors Thick, glossy, and strong Excellent...
Watco Decksafe Advanced
The ultimate protective coating for decking, an ultra durable non slip finish that prolongs the life of timber decking, pontoons, and more. Only one coat required Easy to apply, 3-component product Resists UV fading and discolouration, flexible to resist cracking Flexible, two part polyaspartic resin Excellent slip resistance. PTV (wet)...
Watco Concrex Carbon Fibre Repair Bundle Pack
The Watco Concrex Carbon Fibre Repair Bundle Pack contains everything you need to permanently repair worn, damaged, uneven or holey floors while saving up to 30%. Save up to 30% and get everything you need Embedded with Carbon Fibre for superior strength Resin rich for thin section and feather edge repairs 20 year guarantee against...
Watco Resiflow Super Gloss
A one coat, self-levelling epoxy resin floor finish that leaves a smooth 'showroom' high gloss surface. Suitable for use on concrete, well bonded paint and some metal in production areas, showrooms, reception areas, clean rooms, workshops, warehouses and more. Top of the range high performance, high build, self-levelling floor finish...
Watco Damp Proof Course Cartridge and Nozzle
Damp proof injection stops rising damp in walls. The advanced formula means that fewer holes need to be drilled in the wall when compared with conventional systems. High penetration formula No high pressure tools required Use on single skin or cavity walls Easy to handle, low hazard cream Coverage rates and specifications further below...
Watco Solvent Based Safety Tape Primer
Increases the adhesion of self-adhesive tapes and treads. Binds weak surfaces so that floor tapes will stick Ready in 30 minutes For use on porous dusty surfaces One coat brush application Water-based version also available More Information Delivery Info
Watco ArmourGrip Anti Slip Floor Coating
The ultimate anti-slip floor coating for very heavily trafficked floors, loading bays, ramps, and any wet, oily, slippery surface, inside or out. Suitable for use on concrete, some metals, wood, well bonded paint. Will not wear through like a conventional coating Unique Iron silicate anti slip top surface Heavy duty, 100% solids epoxy...
Watco Concrex Sub Zero Floor Repair Mortar
For essential concrete floor repairs during the winter months and cold environments. Ideal for use in freezer or chiller rooms and unheated areas, inside or outside. Damaged steps, worn and holed floors, fitting guide rails, different levels, and spalled expansion joints. Use inside or out as low as minus 20°C Heavy duty, polyaspartic...
Watco New Concrete Primer
Primes and seals newly laid concrete for early painting. Suitable for areas subject to heavy traffic. Withstands 98% relative humidity Saves waiting for new concrete to dry out Can be applied to damp surfaces Overcoat in just 16 hours Can be used with underfloor heating systems Note: While great care is taken with the colour...
Watco Tack Coat Sub Zero
A polyaspartic resin primer for use at low temperatures. Use inside or out with Concrex Epoxy Floor Repair Mortar Helps with essential floor repairs during the winter months Suitable for chiller room floors, concrete, stone, or render Primer is ready for repair mortar in less than an hour Note: While great care is taken with the...
Watco Trafficline
Brush applied linemarker designed for use on asphalt and tarmac surfaces (may also be used on concrete). Ideal for car parks and medium use areas. One brush applied coat produces a flexible, hard wearing line. Tough, single pack, water based acrylic formulation. Suitable for interior and exterior use.
Watco Aluminium Nosing
Attractive, hardwearing nosing for slippery step nosings. Highlights and makes step nosings safe Simply glue or screw in place Use inside and out Suitable for stone, tile and concrete More Information Delivery Info
Watco Flowpatch Repair Bundle Pack
Everything you need for quick repairs to holes in concrete - quick setting, pourable repairs for filling holes in heavily trafficked concrete floors, inside and out. Ideal for filling deep holes before screeding with Watco Flowtop. The bundle includes: Flowpatch 25kg (Grey) Mixing Blade - for thorough mixing of Watco Flowpatch Steel...
Watco Heavy Duty Line Marking Tape
Special high performance tape for heavy wear areas. Ultra durable when compared to conventional floor tapes. Made from 1mm thick robust PVC with a high performance self adhesive backing and chamfered edges to prevent tripping. The photoluminescent grade is off-white and translucent in the light. Once the lights go off, it glows for up to...
Watco IPA Cleaner
A solvent based cleaner to remove traces of fat and grease. Ensures thorough bond of self-adhesive products Use with Safety Tapes and Ultrabond Tape Dries almost immediately Leaves no surface residue More Information Delivery Info
Watco Concrex Coving Mortar
A heavy-duty epoxy resin mortar for a tough coved skirting often used in hygienic environments such as hospitals, food halls and bunds. Strong enough to feather-edge Virtually indestructible Impervious and non-dusting Permanent, easy clean feature Note: While great care is taken with the colour samples shown, no guarantee can be...
Watco Concrex Asphalt Repair
A heavy duty epoxy resin repair system for ultra-strong repairs to damaged concrete and asphalt. Repair trip hazards and potholes, gangways and work areas Car parks and loading bays, bed in and fix roller shutter door guide rails, etc Takes heavy traffic Ideal for shallow repairs asphalt and tarmac Strong enough to hold guide posts and...
Watco Chemi-Coat Original
A high build 100% solids epoxy resin coating which offers excellent durability and chemical resistance in just one coat. Suitable for use on concrete, metal or previously painted floors or walls where chemicals are stored or used. Excellent resistance to aggressive chemicals in heavy traffic areas Glossy, attractive, easily cleaned finish...
Watco Protecta-Coat
Clear high-sheen gloss or non-slip finish that can be applied in cold conditions, as low as minus 10°C. Ideal for long term protection of epoxy and decorative floor finishes. For when conventional coatings will fail to dry. New type of resin formulation. Uses the latest polyaspartic technology for an exceptionally durable protective...
Watco Firm-Step GRP Riser Plates
Cover stair risers with an extremely durable slip resistant surface. Firm-Step Riser Plates finish the job to give vertical surfaces the same long lasting appearance. They have a smooth finish to avoid scuffing, and do not normally need to be cut to height as the top edge is hidden behind the step nosing. Hides damaged or unsightly risers...
Watco Firm-Step Standard GRP Step Covers
An affordable and versatile solution for slippery steps, ideal for use on ramps, walkways, fire escapes, all staircases, mezzanine floors and areas of medium foot traffic. Tested for slip resistance 3 years guarantee against breakage Interior and exterior use Free cut to size service Suitable for concrete, wood, stone, tiles and metal...
Watco Surestep Roll
Instant slip resistance for paths and gangways. Part of the Watco Surestep range of anti-slip treads and tiles for use on ramps, floors, and more. Self adhesive: easy to apply Tough, resin-bonded aluminium oxide provides a long lasting, gritty finish Water resistant pressure sensitive adhesive backing Suitable for industrial and...
Watco Safety Grip Flex
Watco Safety Grip Flex is a tough, flexible two part polyaspartic coating, provides a good level of flexibility for areas which may be subject to movement, such as metal or wooden ramps or around vibrating machinery. Tough, coarse, anti slip floor finish for areas that are wet and prone to oil spills Superior performance demonstrated by...
Watco Epoxicote High Build Primer
Epoxy resin primer for preparing bare concrete for painting, overcoating with Epoxicote High Build. Primes hard, smooth concrete ready for painting One coat application – quick and easy to apply Low odour, two-part, water-based epoxy resin Seals porous concrete to prevent bubbling in new paint Note: While great care is taken with...
Watco Concrex Acid Strength
Watco Concrex Acid Strength is a high strength epoxy resin mortar with outstanding chemical resistance for heavy duty repairs to masonry and concrete floors. It has been developed to give outstanding chemical resistance, against even 95% sulphuric acid. It offers all the strength, ease of use and durability of Concrex, but is ideal for areas...
Watco Chemi-Coat Anti-Slip
An anti-slip high build 100% solids epoxy resin coating which offers excellent durability and chemical resistance in just one coat. Suitable for use on concrete, metal or previously painted floors or walls where chemicals are stored or used. Easy to apply - aluminium oxide grit is pre-blended into the curing agent Excellent resistance to...
Watco Chemi-Coat Cold Cure
A high build 100% solids epoxy resin coating which offers excellent durability and chemical resistance in just one coat which can be applied in cold conditions down to 5°C. Suitable for use on concrete, metal or previously painted floors or walls where chemicals are stored or used. Cold Cure version cures at 5°C Excellent resistance to...
Watco Chemi-Coat Rapid
A high build, rapid curing, 100% solids epoxy resin coating which offers excellent durability and chemical resistance in just one coat. Suitable for use on concrete, metal or previously painted floors or walls where chemicals are stored or used. Cures rapidly to form a high build (250–300 micron thick) glossy coating Cures within just 8...