- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Page 3 - Waterproofing
Sikalastic 810
Sikalastic 810 is a two part, polyurethane adhesion promoting bonding bridge for overlapping or overcoating of Sikalastic waterproofing membranes when exceeding the maximum waiting time. Good adhesion on flexible PUR coatings Contains no solvents Fast curing Low material consumption Sprayable Professional use only - from the 24th...
Sikalastic 851
Sikalastic 851 is a spray applied, waterproofing, two part, elastic, crack-bridging, rapid-curing polyurethane membrane for machine application only. Excellent crack-bridging properties Highly elastic waterproofing membrane Contains no fillers Low viscosity Fast curing (application with 2-part hot spray equipment) Professional use...
Sikalastic 827 LT
Sikalastic 827 HT is a modified hot-melt adhesive with defined volume increase and chemical bond activated by the hot asphalt used as part of the bridge deck waterproofing system underneath mastic asphalt and asphalt concrete. Features and Benefits Allows bonding between waterproofing membrane Sikalastic 821 LV, Sikalastic 841 ST,...
Sika BituSeal Primer
A bitumen solution primer to be used in conjunction with Sika BituSeal S-115 to increase adhesion and bond to the substrate. High adhesion and bonding ability on various substrates Good binding ability for dust and loose particles Ready to use by brush, roller or spray Order a Paint Colour Sample
Sika Drain 850 Geo
A heavy duty drainage and protection sheet used as a protection and drainage sheet for preformed sheet membrane waterproofing systems, liquid applied membranes and with the Sika White Box concept for waterproofing retaining walls and heavy duty roofs/podiums. High drainage capacity High mechanical/impact resistance Integral filtration...
SikaFuko VT 1 CombiPack
SikaFuko VT 1 is an injectable hose system with unique integral ‘valves’ for sealing and possibly resealing construction joints in watertight structures against water and salt water ingress. It is cast into the construction joints with the concrete. Features & Benefits Uses unique valve techniques for injection Re-Injectable with Sika...
SikaFuko VT 2 CombiPack
SikaFuko VT 2 is an injectable hose system with unique integral ‘valves’ for sealing and possibly resealing construction joints in watertight structures against water and salt water ingress. Features & Benefits Uses unique valve techniques for injection Re-Injectable with cement, Sika acrylic resins and microfine cement suspensions...
Sika Dilatec Tapes
Sika Dilatec Tapes are pre-formed joint and edge waterproofing and sealing tapes, part of the Sika Dilatec System. Sika Dilatec tapes are flexible, ready to use, waterproofing and sealing tapes, made of bitumen resistant PVC with fabric strips at the side, for use in construction and movement joints and for the connections and ends of sheet...
SikaProof A Membrane Edges
SikaProof A Edge is a preformed L-shaped SikaProof A membrane sheet in 1m width folded in 50/50cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Used for damp-proofing, concrete protection and waterproofing for basements and other below ground concrete structures...
SikaProof Tape 150 A
SikaProof Tape 150 A is a self-adhesive tape, based on a Polyacrylate-adhesive on a yellow carrier film coated with the SikaProof A fully bonded sealant and fleece system. SikaProof Tape 150 A is used for sealing transverse overlap joints, connections and details within the SikaProof A membrane system (internal / fleece side) in combination...
SikaProof Patch 200 B
SikaProof Patch 200 B is a self-adhesive tape, consisting of a SikaProof membrane laminated with a Sikaproof Butyle adhesive that is covered with a release liner. It is used for post-sealing of joints, penetrations as well as damages outside on the membrane side of the SikaProof A05/A08/A12 system. Features & Benefits High...
Sika Injection 101 RC
Sika Injection 101 RC is a low viscous, fast foaming and solvent-free water-reactive polyurethane injection foam resin, which cures to a dense flexible foam with a fine cellular structure. It is used for the temporary waterstopping of high water intrusions in cracks, joints and cavities in concrete, brickwork and natural stonework. No...
Sikalastic 8800
Sikalastic 8800 is a two part, elastic, 100% solids, very fast curing and coloured pure polyurea liquid applied membrane with good chemical resistance. Very fast reactivity and curing time Almost immediate return-to-service time Applicable in temperatures from +1°C to +50°C Performs in constant dry temperatures from-30°C to +100°C...
Sika BentoShield Termination Strip
Sika BentoShield Termination Strip is a galvanised steel bonding strip with 5mm holes at 15mm centres in a solid plastic holder, used for fixing and sealing the top edge of Sika BentoShield MAX LM on vertical sections. Features & Benefits Corrosion resistant Secure fixing The Sika BentoShield MAX LM system must only be installed...
Sika BentoShield Accessories
A range of Sika BentoShield Accessories used for the installation of the Sika BentoShield MAX LM system. More Information Delivery Info
Sika Injection 307
Sika Injection 307 is a three component very low viscous, elastic polyacrylic injection resin used for permanent watertight sealing with a versatile and adjustable reaction time. Used for crack and joint injection. Providing passivising environment for embedded steel reinforcement. May only be used by experienced professionals....
Sikaplan 1651/1652/1653 VOC Gas Barriers
Sikaplan 1651/1652/1653 Gas Barriers provide waterproofing, ground gas and VOC protection all in one system. Sikaplan 1651 - for ground-level structures. Sikaplan 1652 - for underground structures. Sikaplan 1653 - for underground structures as a post-applied bonded membrane. Exceptionally high resistance to ground gas and VOCs....
Sikaplan 1650 DPM Gas Barrier and Detailing Strip
Sikaplan 1650 DPM Gas Barrier is a multi-layer, low density polyethylene membrane designed and manufactured to perform as a methane, carbon dioxide, radon ground gas, air and moisture protection system. Welded joints for improved sealing. In-built grid to give greater strength. Fully compatible with below ground waterproofing systems....
Sika 8mm Meshed Membrane
Sika 8mm Meshed Membrane is a high density translucent polyethylene membrane, incorporating 8mm studs which allows the isolation of wet walls above and below ground. Part of the Sika Cavity Drainage System. Incorporates a tough HDPE mesh lathing welded to the front face. Allows the direct application of various plaster finishes. Allows...
Tremco ES501 Kwiklay Tape
Tremco ES501 Kwiklay Tape is a special adhesive tape for applying over the joints when installing Tremco ES500 Sheet Membrane. Helps to provide a complete moisture proof seal Supplied as a 47.5m Roll Please note this product is Made To Order subject to a minimum order quantity of 72 units and a lead time of 7 working days
Resimac Resichem 572 Concrete Seal CWC
Resichem 572 Concrete Seal CWC is a single component, engineering grade, polymer modified, reactive cementitious coating with high adhesive properties. It is used in permanent immersion or negative pressure waterproofing. It incorporates the most advanced micro-silica, polymer and fibre technology, curing to give a dense matrix which is...
Resimac Resichem 573 Fastfill Screed
Resichem 573 Fastfill Screed is a single component fast curing engineering grade, polymer modified, reactive cementitious coating with high adhesive properties. It is used in permanent immersion or negative pressure waterproofing. It incorporates the most advanced micro-silica, polymer and fibre technology, curing to give a dense matrix which...
Resimac Resichem 574 Fastfill Plug
Resichem 574 Fastfill Plug is a single component fast curing engineering grade, polymer modified, reactive cementitious putty for arresting water seepage and infiltration under pressure through cracks, joints and voids in concrete and masonry. For professional use only Please note: this product is subject to a 28 Working Day lead time More...
Fosroc Polyurea WCS
Fosroc Polyurea WCS is a cartridge-packed, 100% solids, flexible, two-component, rapid curing Polyurea system. Designed for use as a fast setting elastomeric waterproof coating and seam seal. Standard Grade is low pressure spray or pour-applied, designed as a waterproofing and protective coating for small areas including repair work. It...
Fosroc Proofex Cavitydrain 80
Fosroc Proofex Cavitydrain 80 is a space saving solution for vertical applications in conjunction with internal blockwork walls and dry lining systems. A high density polyethylene drained cavity former, used to waterproof below ground structures where Type C (Drained Cavity) protection is required, either as the sole protective measure or in...
Fosroc Proofex WG
Fosroc Proofex WG is a three-component system consisting of base resin, liquid hardener and specially graded inert fillers, used in conjunction with the Proofex range of membranes for detailing of pile caps, box outs and other similar applications to ensure complete integrity of the waterproofing and ground gas protection system. Suitable...
Fosroc Proofex Anti-Lime Coating
Fosroc Proofex Anti-Lime Coating is a water based blend of high performance silicates and wetting agents. When applied to concrete surfaces, a reaction with free lime occurs to provide an effective seal Reduces subsequent leaching of lime into Proofex Cavitydrain installations. Please Note: This product is subject to a 14-21 Working Day...
Fosroc Proofex Cavitydrain 200
Fosroc Proofex Cavitydrain 200 is a primarily used for horizontal applications, it can also be used in vertical applications where increased membrane stiffness is required. A high density polyethylene drained cavity former, used to waterproof below ground structures where Type C (Drained Cavity) protection is required, either as the sole...
Fosroc Proofex Cavitydrain PB
Fosroc Proofex Cavitydrain PB allows the direct application of wet lining systems, increasing usable space in basements by eliminating the requirement for internal blockwork walls or dry lining systems. A high density polyethylene drained cavity former, used to waterproof below ground structures where Type C (Drained Cavity) protection is...
Fosroc Proofex Cavitydrain PM20
Fosroc Proofex Cavitydrain PM20 is a mesh faced damp proofing membrane applied to internal wall surfaces in above ground areas to provide protection against rising damp. It is particularly suited for areas where intrusion into the habitable space must be minimised, such as doorways and window reveals. Water ingress is contained within a...
Fosroc Proofex Cavitydrain Pump Kit
Fosroc Proofex Cavitydrain Pump Kits are specifically designed solution for the removal of groundwater from basement cavity drainage membrane systems such as the Fosroc Proofex Cavitydrain range. Includes: Twin pumps for backup against breakdown Compact chamber for installation in small areas Reliable ‘OpenFlow’ waste water pump...
Fosroc Supercast Synkoflex FR
Fosroc Supercast Synkoflex FR waterstop provides watertight integrity for construction joints in concrete structures where swellable waterstops are not best suited i.e. bund walls, thin section walls and where concrete placement is delayed to allow steel reinforcement fixing. Fuel-resistant, non-swelling preformed plastic adhesive waterstop...
Fosroc Supercast Watertight Concrete Powder
Fosroc Supercast Watertight Concrete Powder (formerly Conplast WP402) is a hydrophobic, pore-blocking, concrete admixture suitable for use in Type B (Integral) watertight concrete construction as defined in BS 8102: 2009. Designed for use as an integral water resisting admixture for ready mixed concrete Based on a unique blend of fatty...