- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Need Help?
International Products
International Interthane 990
International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990 in both new construction and as a maintenance...
International Interzone 954
2 component, low VOC, high solids, modified epoxy barrier coat in 4,800+ colours designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.A high film build, high solids, abrasion...
International Interlac 665
International Interlac 665 is a single component alkyd gloss enamel finish.Maintenance coating for use in a wide range of industrial environments including offshore, petrochemical and chemical plants Suitable for areas of limited chemical exposure where an economical single pack finish coat is required Cosmetic finish coat for alkyd...
International Interseal 670HS
International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.4,800+ colours, inc. RAL, RAL Design...
International Intergard 269
International Intergard 269 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.As a blast holding primer suitable for use in immersed and exposed conditions and overcoatable with a wide range of high performance systems. For use at...
International Intergard 740
International Intergard 740 is a two component epoxy finish coat.Suitable for brush, roller and spray application Suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS &...
International Interthane 870
International Interthane 870 is high build which means it can reduce the number of coats you require and keep costs to a minimum. Semi-gloss and available in 4,800+ colours (including RAL 9007 Grey Aluminium), International Interthane 870 delivers excellent cosmetics and extended recoatability in both new construction and as an industrial...
International Intersheen 579
Fast drying, single component, modified acrylic finish in 4,800+ semi-gloss colours intended for use as a sealer coat for single pack acrylic intumescent coating systems but may also be used as a cosmetic finish over single pack primers and intermediates.Order a Colour Sample
International Interplus 770
International Interplus 770 is a low VOC, two component, high solids, internally flexibilised, surface tolerant epoxy primer/intermediate coating intended for use as a versatile, high performance maintenance coating to upgrade tightly adhering existing coatings to longer life durable systems.4,800+ colours, inc. RAL, RAL Design &...
International Intergard 251
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
International Intergard 1735
International Intergard 1735 is a high performance, low VOC, water borne two component epoxy with a high gloss finish. Tough, hard wearing chemically resistant epoxy finish Suitable for most circumstances where the odour or emissions from solvent based coatings are unacceptable 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS...
International Interseal 670HS (Winter Grade)
International Interseal 670HS (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at lower temperatures. The product is still a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel and a...
International Interfine 629HS
International Interfine 629HS is a low VOC, high performance, two component, isocyanate free crosslinking acrylic finish which provides good durability in terms of colour and gloss retention.Designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide variety of aggressive environments including...
International Interfine 878
International Interfine 878 is a high performance, two component, high solids finish which contains no free isocyanates, offers compliance to current VOC legislation, and affords extended lifetime to first maintenance when utilised as part of a high performance anticorrosive system.A step change in long term colour and gloss compared to...
International Interzone 954 (Rapid Cure)
International Interzone 954 (Rapid Cure) is a faster drying version of Interzone 954 to be used in tidal areas where immersion will be rapid. Designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and...
International Interfine 691
International Interfine 691 is a two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability. International Interfine 691 offers equivalent performance to typical recoatable polyurethane cosmetic finishes.Designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide...
International Intercure 200
International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product.As a primer for steelwork intended for use in a wide range of aggressive environments,...
International Interprime 306
International Interprime 306 is a single component, fast drying, high build alkyd primer used as a shop applied post-fabrication primer specifically designed for a blast, fabricate and prime steel production route, and where fast drying and rapid handling properties are required.
International Intergard 410
International Intergard 410 is a high build, high performance, two component epoxy with excellent chemical and abrasion resistance.Suitable for use as part of a high performance coating system to provide an anti-corrosive barrier in areas where aggressive corrosion conditions prevail. 4,800+ colours, inc. RAL, RAL Design & Effect, BS,...
International Interstores Alkyd Primer
International Interstores Alkyd Primer, a quick drying one pack primer that is surface tolerant and compatible with most substrates and able to be overcoated with a wide range of finishes. Use for the maintenance of above water areas and at On Board Maintenance only. Part of a dedicated range of On Board Maintenance (OBM) products specifically...
International Intercure 200HS
A fast drying reputation isn`t all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions.Primer and intermediate in just one coat Rapid recoat times Low temperature cure, cures down...
International Intergard 345
International Intergard 345 is a two component, low VOC, high solids, fast curing epoxy primer/finish containing zinc phosphate anti-corrosive pigmentation. Suitable for use as a one or two coat primer/finish coating or as an intermediate over recommended anti-corrosive primers.High solids versatile epoxy High build rapid one coat...
International Intercryl 525
International Intercryl 525 is designed for use as a primer/finish for structural steel, in a wide variety of general industrial environments of light to moderate corrosivity, including on bridges, commercial buildings, infrastructure and manufacturing plants.Excellent colour and gloss retention 4,800+ colours, inc. RAL, RAL Design &...
International Interfine 979
International Interfine 979 significantly improves upon the gloss and colour retention exhibited by typical polyurethane finishes also displays the same corrosion resistance and has enhanced mechanical properties when compared to traditional epoxy technology.Excellent long term color and gloss retention Contains no free isocyanate Low...
International Intertherm 228HS
International Intertherm 228HS is a highly crosslinked, two component, high build epoxy phenolic coating suitable for exposure in a wide range of highly corrosive environments, including insulated and uninsulated carbon and stainless steel for use on the exterior of pipework, process vessels etc., operating at temperatures up to 230°C (446°F)....
International Intergard 251HS
International Intergard 251HS is a two component, low VOC, high solids, fast curing epoxy primer and intermediate containing zinc phosphate anti-corrosive pigmentation.Please note that all colours have a 10 -14 day lead time, on top of the stated delivery Suitable for overcoating within 2 hours Contains zinc phosphate anti-corrosive...
International Intercryl 700
International Intercryl 700, a single component water borne finish formulated on weather resistant acrylic copolymer technology, a durable finish coat for both water based and solvent based systems where colour and gloss retention are important.4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS & the new NCS 2050 colours Dries...
International Interlac 789
International Interlac 789 is a single component, rapid drying modified alkyd primer/finish, designed for use as a single coat system to afford anti-corrosive protection for structural steelwork exposed to the environment where cosmetic appearance is important, e.g. in dry internal areas or low corrosivity external environments.4,800+...
International Intergard 405
International Intergard 405 is a two component epoxy sealer coat, pigmented with micaceous iron oxide. Formulated on proprietary polymer technology, which provides rapid cure and overcoating, even at low temperatures.Provide efficient sealing of zinc silicate primers in order to prevent pinholing of subsequent topcoats Can also be used...
International Intergard 2510
International Intergard 2510 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate, for use on properly prepared surfaces both in new construction and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
International Interplate 398
International Interplate 398 is a two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application. It is intended to pre-prime steel prior to the fabrication process and can can be overcoated with a large range of coating systems.
International Intersmooth 7460HS SPC
High solids, high performance, TBT free, low friction, self polishing copolymer (SPC) antifouling. Particularly suitable for use where solvent emissions need to be reduced.Specifically designed for deep sea vessels. For use at maintenance & repair. Dries (and can be overcoated) down to -5°C. Compliant with the International...
International Intertuf 262
International Intertuf 262 is a surface tolerant, two pack epoxy primer.As an epoxy anticorrosive coating for use from keel to rail Suitable for use with controlled cathodic protection For use at newbuilding, maintenance & repair or on board maintenance Certified for:Food Contact - Carriage of Grain (NOHH) Fire Resistance -...
Need Help?
Need Help?
International Paints are leading manufacturers of industry scale intumescent paints. Their customers within the industrial sector include some of the biggest transportation and electrical brands in the world, like Ford, Boeing and Samsung, as well as international homeware brands including IKEA. Use the sidebar (or mobile) filter to by product type, 4,800+ colour options (grouped into Colour Families), base type, application method and more.
About International Paints
International Protective Coatings are part of AkzoNobel who are world leaders in performance coatings technology and innovation, with a global reputation for quality and reliability. Offering in-depth knowledge and expertise in areas as diverse as fouling control, color matching, surface design and fire protection, their innovative and sustainable technologies are used in everything from construction and consumer electronics to transport and sports equipment.
Clients
Supported by a leading team of R&D specialists, International has an extensive portfolio which includes high performance paints and coatings for ships, yachts, cars, trucks and buses, industrial installations, structural steel, architectural components, beverage cans, furniture, aircraft, mobile devices and flooring.
Their customers include many of the world's leading companies, such as Airbus, BP, Boeing, Bosch, Dell, Ford, IKEA, Philips, Samsung, Shell, Toyota and Whirlpool.
Products
International Paints products at Rawlins Paints include the ranges Interzone, Interbond, Interchar, Intercryl, Intercure, Interfine, Intergard, Interlac and Interline. Their products, such as International Interzone 954, are used on marine environments, where there is large amounts of tidal movement, such as with offshore oil rigs. One of their popular products is International Interthane 990, a two component acrylic polyurethane finish, which is durable and provides a longt-term recoatability.
Many of the International products can be applied by roller, brush and/or spray paint tools. For more information about this brand, please contact Rawlins Paints by email or phone.