- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Need Help?
International Products
International Intergard 269
International Intergard 269 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.As a blast holding primer suitable for use in immersed and exposed conditions and overcoatable with a wide range of high performance systems. For use at...
International Intergard 740
International Intergard 740 is a two component epoxy finish coat.Suitable for brush, roller and spray application Suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS &...
International Intergard 251
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
International Intergard 1735
International Intergard 1735 is a high performance, low VOC, water borne two component epoxy with a high gloss finish. Tough, hard wearing chemically resistant epoxy finish Suitable for most circumstances where the odour or emissions from solvent based coatings are unacceptable 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS...
International Intergard 410
International Intergard 410 is a high build, high performance, two component epoxy with excellent chemical and abrasion resistance.Suitable for use as part of a high performance coating system to provide an anti-corrosive barrier in areas where aggressive corrosion conditions prevail. 4,800+ colours, inc. RAL, RAL Design & Effect, BS,...
International Intergard 821
International Intergard 821 is a two component solvent free epoxy filler, which is easily mixed and applied by knife or trowel. Intended as a filler for correctly prepared, corroded and pitted steel prior to coating maintenance.
International Intergard 5000
International Intergard 5000, a 2 part universal epoxy anti-corrosive primer for use as a one or two coat system which can be applied directly to mechanically prepared shop primer or grit blasted, hydroblasted or mechanically cleaned surfaces. For use at Newbuilding, Maintenance & Repair or On Board Maintenance.Certified for approved...
International Intergard 345
International Intergard 345 is a two component, low VOC, high solids, fast curing epoxy primer/finish containing zinc phosphate anti-corrosive pigmentation. Suitable for use as a one or two coat primer/finish coating or as an intermediate over recommended anti-corrosive primers.High solids versatile epoxy High build rapid one coat...
International Intergard 475HS
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties.High solids epoxy intermediate Micaceous Iron Oxide variant for additional barrier protection...
International Intergard 251HS
International Intergard 251HS is a two component, low VOC, high solids, fast curing epoxy primer and intermediate containing zinc phosphate anti-corrosive pigmentation.Please note that all colours have a 10 -14 day lead time, on top of the stated delivery Suitable for overcoating within 2 hours Contains zinc phosphate anti-corrosive...
International Intergard 400
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
International Intergard 276
International Intergard 276 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.
International Intergard 263
International Intergard 263, a two pack, tar free, epoxy tie coat for use between anticorrosives and either antifoulings or cosmetic finishes, ensuring maximum system adhesion and performance on outside shell vessel areas.Use as a sealer coat over Tributyltin (TBT) antifoulings For use at newbuilding, maintenance & repair or on board...
International Intergard 214
International Intergard 214 is a two component epoxy sealer coat pigmented with aluminium flake for the effective penetration and sealing of thermally sprayed aluminium coatings to eliminate porosity. Has specification approval for UK Department of Transport Item No.159.
International Intergard 405
International Intergard 405 is a two component epoxy sealer coat, pigmented with micaceous iron oxide. Formulated on proprietary polymer technology, which provides rapid cure and overcoating, even at low temperatures.Provide efficient sealing of zinc silicate primers in order to prevent pinholing of subsequent topcoats Can also be used...
International Intergard 2510
International Intergard 2510 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate, for use on properly prepared surfaces both in new construction and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
International Intergard 162
International Intergard 162 is a two pack, tar free, epoxy tie coat.For use at newbuilding or maintenance and repair Used as a primer for internal steel work Fire Resistance - Surface Spread of Flame (Exova Warringtonfire) Fire Resistance - Smoke and Toxicity (Exova Warringtonfire) Fire Resistance - Marine Equipment Directive...
International Intergard 7600
International Intergard 7600 a two-component, pure epoxy universal primer.Universal application Optimised application properties True long overcoating intervals (up to 6 months) Good abrasion resistance Anticorrosive properties Suitable for application at low temperatures (down to -5°C) Suitable for use with controlled cathodic...
Need Help?
Need Help?
International Paints are leading manufacturers of industry scale intumescent paints. Their customers within the industrial sector include some of the biggest transportation and electrical brands in the world, like Ford, Boeing and Samsung, as well as international homeware brands including IKEA. Use the sidebar (or mobile) filter to by product type, 4,800+ colour options (grouped into Colour Families), base type, application method and more.
About International Paints
International Protective Coatings are part of AkzoNobel who are world leaders in performance coatings technology and innovation, with a global reputation for quality and reliability. Offering in-depth knowledge and expertise in areas as diverse as fouling control, color matching, surface design and fire protection, their innovative and sustainable technologies are used in everything from construction and consumer electronics to transport and sports equipment.
Clients
Supported by a leading team of R&D specialists, International has an extensive portfolio which includes high performance paints and coatings for ships, yachts, cars, trucks and buses, industrial installations, structural steel, architectural components, beverage cans, furniture, aircraft, mobile devices and flooring.
Their customers include many of the world's leading companies, such as Airbus, BP, Boeing, Bosch, Dell, Ford, IKEA, Philips, Samsung, Shell, Toyota and Whirlpool.
Products
International Paints products at Rawlins Paints include the ranges Interzone, Interbond, Interchar, Intercryl, Intercure, Interfine, Intergard, Interlac and Interline. Their products, such as International Interzone 954, are used on marine environments, where there is large amounts of tidal movement, such as with offshore oil rigs. One of their popular products is International Interthane 990, a two component acrylic polyurethane finish, which is durable and provides a longt-term recoatability.
Many of the International products can be applied by roller, brush and/or spray paint tools. For more information about this brand, please contact Rawlins Paints by email or phone.