- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Need Help?
International Products
International Interlac 665
International Interlac 665 is a single component alkyd gloss enamel finish.Maintenance coating for use in a wide range of industrial environments including offshore, petrochemical and chemical plants Suitable for areas of limited chemical exposure where an economical single pack finish coat is required Cosmetic finish coat for alkyd...
International Intertuf 16
International Intertuf 16 is a is a one component, high build cold applied bituminous coating economical coating ideally suited for the protection of interior steel surfaces in enclosed areas such as tanks for storage of sea water, immersed piping and structural steelwork.Suitable for use at low temperatures and over power tool cleaned...
International Intersheen 579
Fast drying, single component, modified acrylic finish in 4,800+ semi-gloss colours intended for use as a sealer coat for single pack acrylic intumescent coating systems but may also be used as a cosmetic finish over single pack primers and intermediates.Order a Colour Sample
International Intertherm 50
International Intertherm 50 is a single component, high temperature coating, suitable for temperatures up to 540°C (1004°F) for the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, etc.
International Intertherm 891
International Intertherm 891 is a one component, general purpose heat resistant paint for use as a heat resistant coating for general site use or as an industrial maintenance coating on both ambient and high temperature steelwork up to 315ºC (600ºF) where an economical aluminium finish is required.
International Interprime 306
International Interprime 306 is a single component, fast drying, high build alkyd primer used as a shop applied post-fabrication primer specifically designed for a blast, fabricate and prime steel production route, and where fast drying and rapid handling properties are required.
International Interstores Alkyd Primer
International Interstores Alkyd Primer, a quick drying one pack primer that is surface tolerant and compatible with most substrates and able to be overcoated with a wide range of finishes. Use for the maintenance of above water areas and at On Board Maintenance only. Part of a dedicated range of On Board Maintenance (OBM) products specifically...
International Interprime 539
International Interprime 539 is a single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate. Intended for use as a pretreatment primer designed to promote adhesion and seal the surface of non-ferrous metals such as aluminium, copper, brass, cadmium, zinc and nickel.
International Interlac 678
International Interlac 678, a one pack alkyd varnish.High gloss Good durability For interior and exterior woodwork For use at newbuilding, maintenance and repair or on-board maintenance
International Intercryl 525
International Intercryl 525 is designed for use as a primer/finish for structural steel, in a wide variety of general industrial environments of light to moderate corrosivity, including on bridges, commercial buildings, infrastructure and manufacturing plants.Excellent colour and gloss retention 4,800+ colours, inc. RAL, RAL Design &...
International Interchar 1190
International Interchar 1190 is a thin film water-borne intumescent coating optimized for 90 and 120 minutes fire resistance, as part of the Interchar range for cellulosic fire protection, International Interchar 1190 will maintain your architectural aesthetics for fire resistance periods up to 120 minutes on structural steelwork.Best in...
International Interlac 668
International Interlac 668 is a one pack, alkyd based, high visibility coating for application to marker buoys and as a safety marker on board ship. International Interlac 668 is for use at Newbuilding, Maintenance & Repair or On Board Maintenance.
International Intercryl 700
International Intercryl 700, a single component water borne finish formulated on weather resistant acrylic copolymer technology, a durable finish coat for both water based and solvent based systems where colour and gloss retention are important.4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS & the new NCS 2050 colours Dries...
International Interlac 789
International Interlac 789 is a single component, rapid drying modified alkyd primer/finish, designed for use as a single coat system to afford anti-corrosive protection for structural steelwork exposed to the environment where cosmetic appearance is important, e.g. in dry internal areas or low corrosivity external environments.4,800+...
International Intertherm 875
International Intertherm 875 is a single component, intermediate temperature finish for use in a wide range of industrial environments as a heat resistant finish coat for application over properly primed steelwork in both new construction and as a maintenance coating at temperatures up to 260°C (500°F).
International Interchar 2060c
Interchar 2060c is an improved weather resistant version of Interchar 2060 recommended for a C4 environment as per ISO 12944-2:2007. Allows Interchar 2060c to remain untopcoated for up to 6 months provided there is no pooled/heavy running water, or frequent high humidity conditions. We do not recommend leaving the product untopcoated without...
International Interplus 4101 Clean Gel
Interplus 4101 Clean Gel, a water-based rust remover / cleaner gel designed to remove light to medium rust deposits from a variety of surfaces. A quick, cost-effective and eco-friendly alternative to sandblasting, acid washing or high-pressure water blasting, Interplus 4101 Clean Gel has a thick consistency and sticks to surfaces, making it...
International Interchar 1260
International Interchar 1260 is a single component, borate, chlorine and APEO free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Class leading thin film waterborne intumescent coating Zero VOC* formulation reduces environmental impact...
International Interchar 1120
This product is temporarily unavailable; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. International Interchar 1120 is a single component, borate and chlorine free, water borne intumescent coating designed for on-site...
International Interbond 201
International Interbond 201 a two-pack epoxy primer/finish offering corrosion protection in one coat.Hard wearing Surface tolerant Can be applied over existing coatings Certified for the carriage of grain Aluminium free Low VOC content
International Interchar 2090
International Interchar 2090 is a single component, solvent borne, borate free, high solids, low VOC intumescent coating designed to maintain your architectural aesthetics whilst providing fire protection for up to 120 minutes for columns, I-sections, cellular beams and hollows.Solvent borne intumescent coating with excellent durability...
International Intersmooth 7460HS SPC
High solids, high performance, TBT free, low friction, self polishing copolymer (SPC) antifouling. Particularly suitable for use where solvent emissions need to be reduced.Specifically designed for deep sea vessels. For use at maintenance & repair. Dries (and can be overcoated) down to -5°C. Compliant with the International...
International Intertuf 203
International Intertuf 203, is a one pack, tar free vinyl anticorrosive which can be used at temperatures down to -5°C.As an anticorrosive for both above and below the waterline and also as a sealer coat over Tributyltin (TBT) antifoulings Suitable for use with controlled cathodic protection For use at newbuilding, maintenance &...
International Intersmooth 360 SPC
Black, brown, and dark-red high performance, TBT free, self polishing copolymer (SPC) antifouling system with patented copper acrylate technology.Specifically designed for coastal vessels. For use at maintenance & repair. Controlled polishing rate and continuous biocide release. Self-smoothing in service. Up to 36 months in-service...
International Intersmooth 7465HS SPC
High performance, TBT free, low friction, self polishing copolymer (SPC) antifouling in brown. Particularly suitable for use where solvent emissions need to be reduced.Specifically designed for deep sea vessels. For use at newbuilding. Compliant with the International Convention on the Control of Harmful Anti-fouling Systems on Ships,...
Need Help?
Need Help?
International Paints are leading manufacturers of industry scale intumescent paints. Their customers within the industrial sector include some of the biggest transportation and electrical brands in the world, like Ford, Boeing and Samsung, as well as international homeware brands including IKEA. Use the sidebar (or mobile) filter to by product type, 4,800+ colour options (grouped into Colour Families), base type, application method and more.
About International Paints
International Protective Coatings are part of AkzoNobel who are world leaders in performance coatings technology and innovation, with a global reputation for quality and reliability. Offering in-depth knowledge and expertise in areas as diverse as fouling control, color matching, surface design and fire protection, their innovative and sustainable technologies are used in everything from construction and consumer electronics to transport and sports equipment.
Clients
Supported by a leading team of R&D specialists, International has an extensive portfolio which includes high performance paints and coatings for ships, yachts, cars, trucks and buses, industrial installations, structural steel, architectural components, beverage cans, furniture, aircraft, mobile devices and flooring.
Their customers include many of the world's leading companies, such as Airbus, BP, Boeing, Bosch, Dell, Ford, IKEA, Philips, Samsung, Shell, Toyota and Whirlpool.
Products
International Paints products at Rawlins Paints include the ranges Interzone, Interbond, Interchar, Intercryl, Intercure, Interfine, Intergard, Interlac and Interline. Their products, such as International Interzone 954, are used on marine environments, where there is large amounts of tidal movement, such as with offshore oil rigs. One of their popular products is International Interthane 990, a two component acrylic polyurethane finish, which is durable and provides a longt-term recoatability.
Many of the International products can be applied by roller, brush and/or spray paint tools. For more information about this brand, please contact Rawlins Paints by email or phone.